DJM suspension???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ucmydust68 · 08-06-2003, 10:02 AM

has anyone used DJM upper and lower control arms and their lowering springs??? i was looking at the front lowering kit, the 2 inch control arms and the 3 inch springs. if i do lower it that much what problems will i run into? it is a 1972 chevy shortbed 1/2 ton 2wd. thanks for the help.

BaggedC10 · 08-06-2003, 10:57 PM

I haven't installed a set of their control arms but DJM offers top notch components. Very happy with everything I've ordered.

BTW, the setup you are considering should be a simple bolt-in task. I don't know what size wheels you have but there may be clearance issues with 15's. Nothing a grinder can't solve though.

ucmydust68 · 08-06-2003, 10:59 PM

sweet, they quoted me 796$ for upper and lower control arms and springs for the front today, does that sound about right?

BaggedC10 · 08-06-2003, 11:05 PM

Quote:

Originally posted by ucmydust68
sweet, they quoted me 796$ for upper and lower control arms and springs for the front today, does that sound about right?

Sounds a bit high. Check-out www.StylinConcepts.com for the best deals and great service.

ucmydust68 · 08-06-2003, 11:06 PM

nice thanks

Physh1 · 08-07-2003, 08:27 AM

I've installed 4 sets of DJM arms. upper and lowers, along with their drop springs. Top notch stuff for sure. Go for it....you'll be very happy with their components.

Cameron

ucmydust68 · 08-07-2003, 10:18 AM

do i have to use the upper control arms? can i just use the stock ones?

Physh1 · 08-07-2003, 02:43 PM

I dunno if they offer a upper for yoru truck but the benifit if they do is that it has some corrected geometry characteristics to simplift the alignment....it is not needed though, a stocker will do.

Cameron

Izzy · 08-17-2003, 09:10 PM

I've used DJM arms on 3 different drops I've done and they were excellent components. I will be getting a set of thier uppers for my wifes truck when I put the bags in.

08-06-2003, 10:02 AM	#1
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	DJM suspension???? has anyone used DJM upper and lower control arms and their lowering springs??? i was looking at the front lowering kit, the 2 inch control arms and the 3 inch springs. if i do lower it that much what problems will i run into? it is a 1972 chevy shortbed 1/2 ton 2wd. thanks for the help.

08-06-2003, 10:57 PM	#2
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	I haven't installed a set of their control arms but DJM offers top notch components. Very happy with everything I've ordered. BTW, the setup you are considering should be a simple bolt-in task. I don't know what size wheels you have but there may be clearance issues with 15's. Nothing a grinder can't solve though. __________________ 2001 Silverado bagged on 22's. Sold Last edited by BaggedC10; 08-06-2003 at 11:02 PM.

08-07-2003, 08:27 AM	#6
Physh1 Registered User Join Date: Aug 2003 Location: Davis, OK Posts: 66	I've installed 4 sets of DJM arms. upper and lowers, along with their drop springs. Top notch stuff for sure. Go for it....you'll be very happy with their components. Cameron __________________ Please visit http://www.WhosNextRacing.com & http://www.FSCustoms.com 2000 Chevy Crew Cab Dually, 1994 Chevy ECSB 4x4, & 1983 GMC Sierra Classic

08-07-2003, 02:43 PM	#8
Physh1 Registered User Join Date: Aug 2003 Location: Davis, OK Posts: 66	I dunno if they offer a upper for yoru truck but the benifit if they do is that it has some corrected geometry characteristics to simplift the alignment....it is not needed though, a stocker will do. Cameron __________________ Please visit http://www.WhosNextRacing.com & http://www.FSCustoms.com 2000 Chevy Crew Cab Dually, 1994 Chevy ECSB 4x4, & 1983 GMC Sierra Classic

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-06-2003, 10:59 PM	#3
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	sweet, they quoted me 796$ for upper and lower control arms and springs for the front today, does that sound about right?

08-06-2003, 11:06 PM	#5
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	nice thanks

08-07-2003, 10:18 AM	#7
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	do i have to use the upper control arms? can i just use the stock ones?

08-17-2003, 09:10 PM	#9
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	I've used DJM arms on 3 different drops I've done and they were excellent components. I will be getting a set of thier uppers for my wifes truck when I put the bags in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.