Best "Rake/Stance" for a Hot Rodded 60-66 C10? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 08-22-2011, 07:10 PM

Quote:

Originally Posted by SulphuriousSam

Isn't this truck like a static drop with cut springs front and back?

Yes
Posted via Mobile Device

willyp · 08-22-2011, 09:37 PM

4/6 drop.............the bottom of the front bumper is 10.5 inches off the street and the bottom of the rear bumper is 14 inches off the street.

Max1775 · 08-22-2011, 10:40 PM

Good looking truck Willy Pete.
Posted via Mobile Device

**ChiefRocka** · 08-22-2011, 11:23 PM

How 'bout this bad boy .....

-
-
-

**ChiefRocka** · 08-22-2011, 11:25 PM

-
-

blue64c20 · 08-22-2011, 11:40 PM

I like that style alot, thats kinda what im going for with my c20, except im going to leave the body in orginal paint for now

SulphuriousSam · 08-23-2011, 08:45 AM

Quote:

Originally Posted by willyp

4/6 drop.............the bottom of the front bumper is 10.5 inches off the street and the bottom of the rear bumper is 14 inches off the street.

That is a sweet looking truck willy. Very nice. Did you use drop spindles up front? On mine I want to lower as far as I can without swapping to disc brakes for now. Later maybe but for now I just want her rolling down the road...

Quote:

Originally Posted by ChiefRocka

How 'bout this bad boy .....

Chief I have always thought that truck looked sinister...

lwb66step · 08-23-2011, 10:54 AM

Quote:

Originally Posted by 1Bad62Pro/Street

Ha ha........
I had too...

Definitely a rake on that one

T Smith · 08-23-2011, 11:42 AM

willyp, love your truck man!

idaho66stepside · 08-23-2011, 12:00 PM

Willy your stance is the perfect stance I'm going for. Gotta tell me springs or spindles?

LostMy65 · 08-23-2011, 04:08 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Ha ha........
I had too...

Yep, that's it.

**62 Longbed** · 08-23-2011, 05:36 PM

Here are a few pictures of my stance ..

blue64c20 · 08-23-2011, 05:42 PM

what suspenision drop did you use on that truck? It looks good

willyp · 08-23-2011, 11:12 PM

Quote:

Originally Posted by idaho66stepside

Willy your stance is the perfect stance I'm going for. Gotta tell me springs or spindles?

2.5" drop spindles and 1.5" drop springs for the front and 6" drop springs in the rear

thanks for the comps..

66K10383 · 08-23-2011, 11:15 PM

An old stock 3/4 ton chevy should sit with the tail up and the nose dipped just a bit, that is if the springs arnt worn from the years of work

darkhorse970 · 08-24-2011, 07:27 AM

Quote:

Originally Posted by willyp

4/6 drop.............the bottom of the front bumper is 10.5 inches off the street and the bottom of the rear bumper is 14 inches off the street.

You've got the hot rod stance nailed! What size tires are you running?

willyp · 08-24-2011, 06:59 PM

Quote:

Originally Posted by darkhorse970

You've got the hot rod stance nailed! What size tires are you running?

thanks, 235/70/16 front and 255/70/16 rear.

LostMy65 · 08-24-2011, 07:27 PM

Quote:

Originally Posted by blue64c20

what suspenision drop did you use on that truck? It looks good

I think he cheated with his torsion bars.

Red65C10 · 08-24-2011, 10:01 PM

Willy - did that 6 inch drop involve a c notch ?

Thanks,

Rich 5150 69 · 08-24-2011, 10:11 PM

Quote:

Originally Posted by willyp

4/6 drop.............the bottom of the front bumper is 10.5 inches off the street and the bottom of the rear bumper is 14 inches off the street.

Willy I measured mine the same way you did just for kicks, mine was at 9 inches front, 14 rear at the bottom of each bumper.

willyp · 08-24-2011, 10:33 PM

kick ass stance rich!

red, c notch not required with the early classic enterprises drop kit.

PAPA KENT · 08-25-2011, 12:13 AM

i tend to like mine a little higher than most guys do but i think a little drop in the front always looks great!

SulphuriousSam · 08-25-2011, 12:26 AM

Hey Papa Kent that's real nice. What was done suspension-wise to achieve the stance?
Posted via Mobile Device

PAPA KENT · 08-25-2011, 12:59 AM

Quote:

Originally Posted by sulphurioussam

hey papa kent that's real nice. What was done suspension-wise to achieve the stance?
posted via mobile device

well thankyou! I just installed (light duty) factory coils in the rear,(not the heavier progressive coils) and cranked down the torsion bars a bit.when i purchased it last fall it had heated coils on it and was to low for me and it rides on 245/60 15's.

wutnxt · 08-25-2011, 06:19 PM

I know these pictures aren't great for stance but I like the back up a bit myself. So This truck has 2.5" drop spindles and 3 " drop coils in the front and 5" drop in the back. Thats only 1/2" difference but when you stand back and look at these trucks they look like the back is higher to begin with because of the way the box bottom ends.

08-22-2011, 09:37 PM	#52
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? 4/6 drop.............the bottom of the front bumper is 10.5 inches off the street and the bottom of the rear bumper is 14 inches off the street. Attached Images __________________ The price of cool aint cheap.

08-22-2011, 10:40 PM	#53
Max1775 Registered User Join Date: Mar 2011 Location: Bandera, Texas Posts: 251	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Good looking truck Willy Pete. Posted via Mobile Device

08-22-2011, 11:23 PM	#54
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? How 'bout this bad boy ..... - - - Attached Images __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-22-2011, 11:25 PM	#55
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? - - Attached Images __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-22-2011, 11:40 PM	#56
blue64c20 Registered User Join Date: Aug 2011 Location: summerfield NC Posts: 82	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? I like that style alot, thats kinda what im going for with my c20, except im going to leave the body in orginal paint for now

08-23-2011, 11:42 AM	#59
T Smith Registered User Join Date: Jan 2011 Location: Vicksburg, Mississippi Posts: 567	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? willyp, love your truck man!

08-23-2011, 12:00 PM	#60
idaho66stepside Registered User Join Date: Feb 2010 Location: Twin Falls, ID Posts: 119	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Willy your stance is the perfect stance I'm going for. Gotta tell me springs or spindles?

08-23-2011, 05:36 PM	#62
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Here are a few pictures of my stance .. Attached Images

08-23-2011, 05:42 PM	#63
blue64c20 Registered User Join Date: Aug 2011 Location: summerfield NC Posts: 82	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? what suspenision drop did you use on that truck? It looks good

08-23-2011, 11:15 PM	#65
66K10383 Registered User Join Date: Jul 2011 Location: Spokane Posts: 42	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? An old stock 3/4 ton chevy should sit with the tail up and the nose dipped just a bit, that is if the springs arnt worn from the years of work

08-24-2011, 10:01 PM	#69
Red65C10 Registered User Join Date: Mar 2011 Location: Cumming GA Posts: 202	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Willy - did that 6 inch drop involve a c notch ? Thanks, __________________ Billy 65 C10 ............................... ____ ................ ________-\|___\____ .;.;;.:;:;.,;.\|__(O)___\|____/_(O)\| _______________________________ P.S. Send truck money !

08-24-2011, 10:33 PM	#71
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? kick ass stance rich! red, c notch not required with the early classic enterprises drop kit. __________________ The price of cool aint cheap.

08-25-2011, 12:13 AM	#72
PAPA KENT Registered User Join Date: Nov 2010 Location: Lolo montana Posts: 361	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? i tend to like mine a little higher than most guys do but i think a little drop in the front always looks great! Attached Images

08-25-2011, 12:26 AM	#73
SulphuriousSam Registered User Join Date: Apr 2011 Location: Sulphur, OK Posts: 316	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Hey Papa Kent that's real nice. What was done suspension-wise to achieve the stance? Posted via Mobile Device __________________ 1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride)

08-25-2011, 06:19 PM	#75
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? I know these pictures aren't great for stance but I like the back up a bit myself. So This truck has 2.5" drop spindles and 3 " drop coils in the front and 5" drop in the back. Thats only 1/2" difference but when you stand back and look at these trucks they look like the back is higher to begin with because of the way the box bottom ends. Attached Images __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.