|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-12-2011, 07:52 PM
|
#1 |
|
Registered User
Join Date: Sep 2011
Location: Madisonville Tennessee
Posts: 30
|
Power steering question
I have a 73 with a 65 model 327 in it with 3 speed. It has manual steering
and I want to change it to power steering.The man at the junk yard said I would need pump,box,line's,arm and steering column. Is the manual steering shaft the same size as the power steering shaft.I didn't know that I had to change the column......Thanks in advance for any info
__________________
EVEN JESUS HAD A FISH STORY...JOHN 21: 6 and 11 Bass in picture is a 11.4 pound largemouth bass I caught March 13 2014 |
|
|
|
10-12-2011, 08:30 PM
|
#2 |
|
Registered User
Join Date: Sep 2010
Location: los angeles
Posts: 1,134
|
Re: Power steering question
I'm not sure if the '78's are different than '73...but for mine, I just needed the ps box - and matching pitman arm, the lines, the pump and brackets to match my engine, and a v-belt. I bought a new coupler because mine was gnarly, and I fit it right on the ol' manual column. The coupler fit a little funky, but not unsafe...I attributed the fit to being a "universal" GM coupler from Dorman.
|
|
|
|
|
10-13-2011, 06:25 PM
|
#3 |
|
Registered User
Join Date: Sep 2011
Location: Madisonville Tennessee
Posts: 30
|
Re: Power steering question
Thanks......Sounds good
__________________
EVEN JESUS HAD A FISH STORY...JOHN 21: 6 and 11 Bass in picture is a 11.4 pound largemouth bass I caught March 13 2014 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
