66 suburban build

[Nobby]

Originally Posted by McMurphy

I took my hood apart last weekend too, and it turned out to be more of a task than I had anticipated. Would have gone better if I had just bit the bullet and took it apart in reverse from how it was assembled.... Oh well, got it done, now to modify it, wait for the replacement rubber pads to arrive, and then put it back together!

How is yours?

I gotta blast,prime and paint the inner hood support(frame) before I start mocking the hood back up.I took a little break on the burb this week Should hit it hard this weekend.

[Nobby]

Alright we spent two long days on the burb. Changed out a rusted panel on drivers side and finish the skinning on the pass door.That 1/8'' gap around the door didn't happen by accident neither. There was alot of welding,grinding pushing,pulling and cussing but I'm very happy with the end result.

[Nobby]

One more cause everybody likes pics...

[Captainfab]

So you used panel bond to install the door skins?

That gap looks awesome.....there's just something about nice even gaps all around.

[Nobby]

Originally Posted by Captainfab

So you used panel bond to install the door skins?

That gap looks awesome.....there's just something about nice even gaps all around.

Yea Captain, 3M door skinning adhesive around the edges and welded across the top. It came out great and real solid. I'm seriously considering skinning the drivers door now.

[72BlckButy]

Happy birthday buddy!

[Nobby]

Originally Posted by 72BlckButy

Happy birthday buddy!

Thanks Nate.... I spent my Bday seeing the USA in a Chevrolet! 25 hr trip to Mount Vernon Il. to pick up and haul back a 34 ford for my uncle. Beautiful country we have here!!!!

[2dwn4u]

Originally Posted by Nobby

Alright we spent two long days on the burb. Changed out a rusted panel on drivers side and finish the skinning on the pass door.That 1/8'' gap around the door didn't happen by accident neither. There was alot of welding,grinding pushing,pulling and cussing but I'm very happy with the end result.

Where did you get the door skin from and what do you think of the quality of it? Looks really nice.

[67swb72klb]

That gap looks awesome.....there's just something about nice even gaps all around.[/QUOTE]

they sure didnt come off the asy line with those kinda gaps
good job on the build going prety fast !

[Nobby]

Originally Posted by 2dwn4u

Where did you get the door skin from and what do you think of the quality of it? Looks really nice.

I got it from Top Banana,it's a keyparts pc.I think it's a well pressed piece.I sprayed 3 layers of undercoat before I installed it and it is very solid.
Thanks,
Nobby

Originally Posted by 67swb72klb

That gap looks awesome.....there's just something about nice even gaps all around.

they sure didnt come off the asy line with those kinda gaps
good job on the build going prety fast ![/QUOTE]

Thanks, I'm shooting for perfect but will accept a little less

[Nobby]

Quick question guys, when i got my burb the front cap wasn't on so I'm not sure on something. Since the burb has a rubber mount on the core support bracket and the truck don't. Does the core bolt directly to the bracket or is there a bushing that goes between?

[gostranger]

I dont know if mine was stock but mine had a large washer and then a thin rubber washer about1/4"thick hope this helps!
Posted via Mobile Device

[Nobby]

Originally Posted by gostranger

I dont know if mine was stock but mine had a large washer and then a thin rubber washer about1/4"thick hope this helps!
Posted via Mobile Device

Thanks man that makes since now. I'm mocking up the front end and was having a little trouble...

[protrash64]

It definitely gets a bushing of some sort; it's in the body bushing kits.

[allaboutchevelles]

Nice work. door gaps look perfect. keep up the good work. I started stripping the inside of my roof like you did and man its alot of work like you said.

[mMad Dawg]

Nobby could you take a picture of where the pinch weld ends at the front of the rear wheelwell? Im rebuilding a 66 panel that was missing the bottom 3 inches of the body. I got a wheel well repair panel for a pickup but I have to fabricate the rest. Also if you could include a picture of how the 1/4 panel ends by the rear doors. Thanks. Iwsh I was making progress as fast as you. Your burb is looking good. Gord

[hemifalcon]

..great looking project.. I'll be referring to yours.. I know that I'm going to be cutting a lot of spot welds now after seeing this.. It's the only way.. Great job--

[Nobby]

Thanks for all the encouragement guys! It slowed down a little bit lately but it's about to pick up again. I'll take pics as requested soon. Bodys coming off this weekend so I can start on frame and start smoothing firewall and repair windshield overhang. Heres a couple pics, repaired upper drivers jam, floor work and skinning drivers door.
Later,
Nobby

[allaboutchevelles]

Looking Good. Keep up the good work. Im glad I didnt have to do any panel repair around the top of my cab around the roof. Looks like your a pro at door skinning now.

[Nobby]

No turning back now....Gotta blow the frame apart and send to blaster. Prime, paint then install all this suspension I've been collecting

[Nobby]

O yea does anyone have a cab their cutting up? I need this spot around the wiper motor with the bracket too.

[hemifalcon]

I might be able to help you out with that cab piece.. PM ME if interested.. I have a solid 65 truck cab I'm cutting up for sub

[Captainfab]

I have that piece also. Let me know if you end up needing it.

[doubleb's69]

Sweet Burb. I would love to have one some day. I've kinda slowed down on 67-72's and would like to get into 60-66 trucks, etc, plus I can't haul the whole family around at the car shows unless they are in the bed.

[hemifalcon]

Nobby==what are you doing for the suspension on the 'burb?