|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-26-2012, 02:41 PM
|
#1 |
|
Registered User
Join Date: Dec 2010
Location: Valdosta Georgia
Posts: 58
|
Need engine setback recommendations.
Does anyone know what the engine setback would work best for a pro touring/road course 68 c-10. I made the front suspension, coilover rack and pinion setup designed after the Jim Meyers racing front bolt on kit.
I have the motor (sbc) in there now ready to build the motor mounts and the #1 sparkplug is about 1-1/2 inches in front of the top balljoint.Cant go back anymore without making a new firewall.Is that far enough back ? |
|
|
|
02-28-2012, 11:55 AM
|
#2 |
|
Happy to be here
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: Need engine setback recommendations.
Anyone?
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
|
02-28-2012, 12:57 PM
|
#3 |
|
Senior Member
 
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Need engine setback recommendations.
the farther the better. Also, the lower the better. Set the oil pan / trans even with or just below the bottom of the frame rail, but keep it safe. Dropping the eng/trans may help you move it back some more. GoodGuys, ASCS, and Truckin Shootout have no rules on this, so it's up to you. The distributer is the stumble point on this set up, IMHO. Make sure you can get it out for service.
__________________
GoodGuys 2012 Pro-Truck Champion  2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
