WIW '67 Small Window Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JON70CST · 03-01-2012, 01:04 PM

Just wondering what my '67 Small window cab is roughly worth? It will need new cab corners and rockers, and a patch on the driver's side floor. It does still have the seat and behind seat tank in it but I will be holding onto those items. The doors aren't really any good so I would let them go with or without the truck.

I can get better pictures later, but this is all I have right now.

Rochlow · 03-02-2012, 11:14 AM

I've been researching cabs recently and dependent on the rust issues. I've seen them go for $250-$1500. $1500 being pretty darn close to perfect. The issue is shipping them.

dubds10 · 03-02-2012, 12:19 PM

Rust is the main thing. I sell bare cabs with rust problems out here for $100ea and nobody wants them lol It costs about $2gs at a bodyshop to fix the usual rust problems, so people seem to keep looking for mint cabs...not many around here. I tend to scrap most rusty parts out here in the West..only way to make any money back.

Nate

duallyjams · 03-02-2012, 05:27 PM

The 67 have a lot of one off year parts. You can part all the little stuff and still try to sell the or just scrap and make out pretty good.
vent window 67 only
window handle 67 only
inside door handle 67 only
out side door handle 67 only
all dash knobs 67 only
I have also read that the doors and hinges are heavier 67 only

03-01-2012, 01:04 PM	#1
JON70CST Registered User Join Date: Jun 2007 Location: Lethbridge, AB Posts: 234	WIW '67 Small Window Cab Just wondering what my '67 Small window cab is roughly worth? It will need new cab corners and rockers, and a patch on the driver's side floor. It does still have the seat and behind seat tank in it but I will be holding onto those items. The doors aren't really any good so I would let them go with or without the truck. I can get better pictures later, but this is all I have right now.

03-02-2012, 11:14 AM	#2
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: WIW '67 Small Window Cab I've been researching cabs recently and dependent on the rust issues. I've seen them go for $250-$1500. $1500 being pretty darn close to perfect. The issue is shipping them.

03-02-2012, 12:19 PM	#3
dubds10 Stalker Nate Join Date: Dec 2010 Location: Langley, BC, Canada Posts: 1,556	Re: WIW '67 Small Window Cab Rust is the main thing. I sell bare cabs with rust problems out here for $100ea and nobody wants them lol It costs about $2gs at a bodyshop to fix the usual rust problems, so people seem to keep looking for mint cabs...not many around here. I tend to scrap most rusty parts out here in the West..only way to make any money back. Nate __________________ 1957 GMC SWB stepper modified summer time driver 1963 Chevy Fire Dept. Command Center Van 2 ton - future food vending truck project 1965 Chevy P10 Ice Cream Truck project Instagram - TheDonutDiner FaceBook - @UscreamIscream

03-02-2012, 05:27 PM	#4
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: WIW '67 Small Window Cab The 67 have a lot of one off year parts. You can part all the little stuff and still try to sell the or just scrap and make out pretty good. vent window 67 only window handle 67 only inside door handle 67 only out side door handle 67 only all dash knobs 67 only I have also read that the doors and hinges are heavier 67 only __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.