|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-15-2012, 06:35 PM
|
#1 |
|
Registered User
Join Date: May 2011
Location: Austin, TX
Posts: 32
|
Turn Signal Switch Problem
I need to purchase a new turn signal switch. When looking at LMC, I found three different switches for the varying years (#31).
 73-76 77-83 84-87 Here is my dilemma: my truck is a 73, but my steering column is from a 78. Which do I purchase? I would figure 78 but idk what is the difference? Wiring? Diameter? I called LMC and all the rep could tell me was the wires on the 73-76 is 20" long. Can you guys help?
__________________
1973 C10 350 700R4 |
|
|
|
03-15-2012, 07:48 PM
|
#2 |
|
Registered User
Join Date: Sep 2011
Location: Chesterfield, Va.
Posts: 339
|
Re: Turn Signal Switch Problem
I'd get the 78, and if need be switch terminals on plug if needed.
|
|
|
|
|
03-15-2012, 07:49 PM
|
#3 |
|
Registered User
Join Date: Nov 2011
Location: rock springs wyoming
Posts: 182
|
Re: Turn Signal Switch Problem
if its 78 column go with that. i would first go to the junk yard and look at the up close and see what the differents is
|
|
|
|
|
03-16-2012, 10:40 AM
|
#4 |
|
Registered User
Join Date: May 2011
Location: Austin, TX
Posts: 32
|
Re: Turn Signal Switch Problem
thanks for input, guys
__________________
1973 C10 350 700R4 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
