NE 63-66 Chevy GMC Fleetside Rear Bumper With Brackets and Pans

[paulspickupparts]

I removed this 63-66 Chevy GMC Fleetside Rear Bumper I am parting out. It is a 63 Chevy Custom Cab truck so was kind of loaded up with accessories. This would be for the guy who wants a real GM rear bumper. Real GM brackets. Real GM splash pans. Please look at the images as this is a used bumper and will need to be replated for show. Previous owner drilled a hole for a ball hitch. Bottom of bumper has a small notch wore into it from and under the bumper hitch which could be ground smooth. Chrome shop can easily fill. The bumper has surface scratches and the two center holes have a slight pull. One filler pan will have to be straightened. Brackets are nice and straight but of course will need to be repainted. Brackets may have to be removed for shipping so no guarantee if the original bolts will unthread . This is for the person that wants a real GM bumper made of spring steel and original look. The repos are only a click away. I also have the front in another thread. Price on this bumper with brackets $175 plus shipping (estimate $50-$75 but will be actual). ThanksBumper has been sold locally. Thanks for all the interest. Front is still available, Paul

[Slow Build]

Could you post some close up pictures of the rough spots?
If you could find out the shipping charge to 94531 I'd appreciate it.

[paulspickupparts]

Sure, can you give me a Zip Code and if Greyhound would be an option at your location. Will try to post some pics in the next hour or so.

[paulspickupparts]

Here are some pics of the front I circled two very slight dings pushing out . Bottom bolt holes slight pulled . Scuffing and scratches in the chrome. Maybe I should have said these are core bumpers. If you have a higher end daily driver they are probably not what you want. But if you want a good bumper that could easily be straightened(press) and rechromed later this would be a good bumper. Sorry I missed you zip. A rough estimate of shipping the front would be $55.66. It helps if you have a friend that has a business. Rate would be a little less.

[paulspickupparts]

Here are the pics of the rear. Nice brackets and pan will straighten easily. Extra ball hitch hole . Liscense plates are slight rounded as previous owner bolted hitch on to this . At least he did not drill different holes . Bottom edge has worn area where hitch rubbed and created a step will not be seen but could be ground smooth before chroming. Some dings on the face where he backed up to hook things up. Nebraska Farmer! . Bolt holes have very slight pull and easily straightened. Few small bends at the bottom of the bumper in the middle . Would straighten easily. I have taken the brackets off and could include with front bumper as there will be more room in that box because of the curved bumper ends. Shipping would probably be the same in that $55-$60 range.

[Slow Build]

I'm interested in the rear bumper, not the front. The Stockton, Ca Greyhound station is the closest location.

[paulspickupparts]

Greyhound shipping would be $77.75 . I would ship to your door via Fed X for $60. If more than that I will pick up the cost. Bumper would be taken apart and brackets and pans tucked inside the bumper. If I can ship to a business it might be less. Thanks Paul

[Slow Build]

I think I'm going to pass.
Thanks

[1971 GMC SHORTY]

Originally Posted by paulspickupparts

Here are the pics of the rear. Nice brackets and pan will straighten easily. Extra ball hitch hole . Liscense plates are slight rounded as previous owner bolted hitch on to this . At least he did not drill different holes . Bottom edge has worn area where hitch rubbed and created a step will not be seen but could be ground smooth before chroming. Some dings on the face where he backed up to hook things up. Nebraska Farmer! . Bolt holes have very slight pull and easily straightened. Few small bends at the bottom of the bumper in the middle . Would straighten easily. I have taken the brackets off and could include with front bumper as there will be more room in that box because of the curved bumper ends. Shipping would probably be the same in that $55-$60 range.

How much Shipped to 91340
Posted via Mobile Device

[paulspickupparts]

Will ship for $50 . Actual shipping may be a little more, if it is I willl pay the diff. Thanks

[ChevyFreak60]

Is the rear bumper still available? And how much shipped to 87506

[paulspickupparts]

It is still available. I would ship it (dissassembled) for $50 to your door. Thanks Paul

[yelmer]

hello would you sell just the rear brackets?

[Leadfoot Lambert]

If you decide to break it up I would like first dibbs on just the splash pans, PM me if you do.

[paulspickupparts]

Well , if I can find someone who wants the bumper only I will split. I was going to throw on ebay and see if I can sell the whole thing. Will let you guys know if I split. You will be in line. Thanks

[paulspickupparts]

Rear bumper has been sold locally . Thanks for all the interest. The front is still available .