TX Parting These Three Trucks

[DaHos]

Originally Posted by lynnfield

DaHos, shipping is $137 fedex or $78 greyhound. I picked up a box from a local body shop today that I think this will safely ship in. Thanks, Greg

OUCH !!!! another dead deal due to shipping $$$...........thanks for trying. D'

[clb1024]

Originally Posted by lynnfield

nightmare has passed on the GMC frame.

clb1024, the springs are available $50 + shipping

Drewbee, the spring hangers are also available.

I will have to pass on the springs, found a set locally.

[lynnfield]

DaHos, I understand, it's just hard to ship an oversize package that distance and keep it reasonable. The fees for the "oversize" is what kills it, sorry.

clb1024, no problem, thanks for letting me know

68 four on the floor, your E check cleared today. I'll get the trim pieces out tomorrow.

[lynnfield]

425HP409, pics of the parts you asked about. $170 shipped for it all. That's the heat shield & tube, air cleaner, carb & brackets, cowl vent actuator, and 2 sets of passenger kick panel vents. Thanks, Greg

[72SWBChevy]

[ATTACH][/ATTACH]72SWBChevy, if you will meet me at $38 I'll do it. That will be about $25 for me after paypal fees and shipping.[/QUOTE]

I will take it. Tks If 425HP409 passes, what would you take for just the carb bracket also?

[lynnfield]

72SWBChevy, I have another one, make it an even $45 and I'll ship them together. Greg

[72SWBChevy]

Originally Posted by lynnfield

72SWBChevy, I have another one, make it an even $45 and I'll ship them together. Greg

sounds good, pls adv payment you wud like.

[425HP409]

I will take all of the items we discussed to include both of the carb rear brackets as shown in the picture. pm me payment info
Charles

[lynnfield]

If I have missed anything or anyone to this point, please let me know. The thread has gotten long and at times it's hard to keep up with it all. Thanks, Greg

[BigRed76]

Originally Posted by lynnfield

I have started my nightshifts, but I was able to get out and get some things done before work.

BigRed76, the steering box in the brown truck is dirty, but there are no leaks and the fluid that came out of it was clean. $75 shipped, (it's heavy).

poncyj, The 67 has the best lower door "A" pillars, and I will start cutting it up by the end of the week. I can get you either A/C dash. $175 shipped for all of it

Greg, I sent you payment for the steering box.
Posted via Mobile Device

[72SWBChevy]

Originally Posted by 72SWBChevy

sounds good, pls adv payment you wud like.

Greg I have sent payment!! Tks.

[chewychevy67]

hey greg being that i will have a larger parcel coming from you when the diff parts iare ready i need a auto transmission crossmember. dont need the top parts just the long bottom. i need one like the top one in the picture with the curves for the exhaust pipes. the bottom one is from my 67 and i want the exhaust to get up as high as i can get it. Rod.

[poncyj]

Gregg, can you send pics of the dash and pillars to edmondjjr@yahoo.com?

[lynnfield]

BigRed76, got it

72SWBChevy, got it

chewychevy67, I should be able to help you with that.

poncyj, I will try to get pics sent to you by the end of the weekend

To all, I am trying to get parts pulled and packaged so they can go out either monday or tuesday. I have had a few things come up here and there that have slowed me down a bit, and with tomorrow being fathers day, I promised I would slow down and spend some time with the kids. Hope everyone understands, and I will get it done. Thanks, Greg

[missinfishin10]

Received the sway bar today Greg.

Thank you!

Jeff

[71on20s]

Do you have any cabs left?
Posted via Mobile Device
Posted via Mobile Device

[orange 69]

Originally Posted by lynnfield

Orange69, the brown tailgate has some rust thru along the bottom, but the rest is pretty straight. $150 shipped

The blue one has small three dings, one on top, one below the "R" and one between the "L E". $450 shipped

Sorry for just now getting back to you on these tailgates. I will have to pass for now, I have to may irons in the fire
If you know what I mean.

[68 Four on the Floor]

Got my trim today packaged like a boss.Thanks

[lynnfield]

71on20s, sent you a PM on what I have for cabs

orange 69, no worries, I understand

Leroy-B1, I have listed the blue tailgate in a different thread, I offered it to you shipped, that offer still stands

Blue tailgate from this thread listed here: http://67-72chevytrucks.com/vboard/s...d.php?t=529431

BigRed76, 72SWBChevy, 425HP409, your packages made it out today.

Thanks, Greg

[71on20s]

I'm interested in the 67 cab as a whole might be able to come out fri to check it out
Posted via Mobile Device
Posted via Mobile Device

[72SWBChevy]

Originally Posted by lynnfield

71on20s, sent you a PM on what I have for cabs

orange 69, no worries, I understand

Leroy-B1, I have listed the blue tailgate in a different thread, I offered it to you shipped, that offer still stands

Blue tailgate from this thread listed here: http://67-72chevytrucks.com/vboard/s...d.php?t=529431

BigRed76, 72SWBChevy, 425HP409, your packages made it out today.

Thanks, Greg

thanks.

[nate_g_2003]

Originally Posted by lynnfield

nate_g_2003, the white one that was in the GMC is available, good foam, needs recovering. $50 picked up.

I know it's been a week or two since I asked about the seat, but I am interested if it is still available. Trying to convince my wife to road trip up to Waco on the 30th of June (it's the soonest we could come to get it). Will let you know either way.

[nate_g_2003]

Would you be able to grab any more pics of the seat for me, please?

[lynnfield]

nate_g_2003, sure, I have a couple here to chose from. All will need recovering. Greg

[nate_g_2003]

Greg:

PM sent on seat.

Thanks!
-Nathan