CA Chrome and painted sbc pulleys, swivel water neck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 06-27-2012, 08:57 AM

I have a small assortment of small block pulleys all nicely painted black except for the chrome one. Asking $18 shipped each and will combine shipping. The crank pulley on my engine is for sale also. Brand new 45 degree swivel water neck never installed SOLD.

Posted via Mobile Device

shawno72 · 06-27-2012, 09:00 AM

Posted via Mobile Device

shawno72 · 06-27-2012, 09:01 AM

Posted via Mobile Device

gmikkels · 06-27-2012, 09:32 AM

I will take the water neck.
Thanks,
Gene

shawno72 · 06-27-2012, 09:33 AM

Quote:

Originally Posted by gmikkels

I will take the water neck.
Thanks,
Gene

Pm sent.
Posted via Mobile Device

shawno72 · 06-27-2012, 10:22 AM

Water neck sold, thanks Gene!
Posted via Mobile Device

shawno72 · 06-27-2012, 08:57 PM

Up
Posted via Mobile Device

shawno72 · 06-28-2012, 02:45 PM

Pulleys get yer fresh painted pulleys here>>>

**CC69Rat** · 06-28-2012, 03:55 PM

What's that I see thar maitee ! .. The double hump heads I see? Is that your new 327? 041 / 186 Castings? I had a set of those a while back and sold them. I wish I would have kept them now!

**CC69Rat** · 06-28-2012, 04:00 PM

Have you seen the new AFR heads that are cut down to look like the old Double Hump castings? .. a little orange paint, and oh, by the way 60+ hp direct bolt on ..

Gotta keep them guessing ..

shawno72 · 06-28-2012, 04:17 PM

Good eye Chad but what you see there is a 1970 Z28 350 with the 491 heads. I bought this engine from my father in law for the heads but when I pulled them off and saw that the whole engine was a fairly fresh rebuild with moderate crower cam I decided to reseal it and run while I have the 327 short block rebuilt. Here is an updated pic, was hoping to have it installed in time for the Brothers show but not quite gonna make it. Next year for sure

Posted via Mobile Device

**CC69Rat** · 06-28-2012, 04:40 PM

Sweet ! Sorry for the minor hijack

Pulleys! Get your pulleys Here! Bump for ya at least.

shawno72 · 06-28-2012, 05:03 PM

Thank you Chad

HotRod C/10 · 06-28-2012, 07:49 PM

Quote:

Originally Posted by shawno72

Good eye Chad but what you see there is a 1970 Z28 350 with the 491 heads. I bought this engine from my father in law for the heads but when I pulled them off and saw that the whole engine was a fairly fresh rebuild with moderate crower cam I decided to reseal it and run while I have the 327 short block rebuilt. Here is an updated pic, was hoping to have it installed in time for the Brothers show but not quite gonna make it. Next year for sure

Posted via Mobile Device

what headers are those?

shawno72 · 06-28-2012, 08:03 PM

Quote:

Originally Posted by DSALRAM

what headers are those?

Ebay Chinese specials. Were $112 shipped. Nice thick flanges.http://www.ebay.com/itm/110860657902...84.m1439.l2649

shawno72 · 06-29-2012, 06:53 PM

Offers???

06-27-2012, 08:57 AM	#1
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Chrome and painted sbc pulleys, swivel water neck I have a small assortment of small block pulleys all nicely painted black except for the chrome one. Asking $18 shipped each and will combine shipping. The crank pulley on my engine is for sale also. Brand new 45 degree swivel water neck never installed SOLD. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" Last edited by shawno72; 06-27-2012 at 10:21 AM.

06-27-2012, 09:00 AM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-27-2012, 09:01 AM	#3
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-27-2012, 09:32 AM	#4
gmikkels Registered User Join Date: Dec 2007 Location: franktown colorado Posts: 379	Re: Chrome and painted sbc pulleys, swivel water neck I will take the water neck. Thanks, Gene

06-27-2012, 10:22 AM	#6
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Water neck sold, thanks Gene! Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-27-2012, 08:57 PM	#7
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Up Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-28-2012, 02:45 PM	#8
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Pulleys get yer fresh painted pulleys here>>> __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-28-2012, 03:55 PM	#9
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,216	Re: Chrome and painted sbc pulleys, swivel water neck What's that I see thar maitee ! .. The double hump heads I see? Is that your new 327? 041 / 186 Castings? I had a set of those a while back and sold them. I wish I would have kept them now! __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

06-28-2012, 04:00 PM	#10
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,216	Re: Chrome and painted sbc pulleys, swivel water neck Have you seen the new AFR heads that are cut down to look like the old Double Hump castings? .. a little orange paint, and oh, by the way 60+ hp direct bolt on .. Gotta keep them guessing .. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

06-28-2012, 04:17 PM	#11
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Good eye Chad but what you see there is a 1970 Z28 350 with the 491 heads. I bought this engine from my father in law for the heads but when I pulled them off and saw that the whole engine was a fairly fresh rebuild with moderate crower cam I decided to reseal it and run while I have the 327 short block rebuilt. Here is an updated pic, was hoping to have it installed in time for the Brothers show but not quite gonna make it. Next year for sure Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-28-2012, 04:40 PM	#12
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,216	Re: Chrome and painted sbc pulleys, swivel water neck Sweet ! Sorry for the minor hijack Pulleys! Get your pulleys Here! Bump for ya at least. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

06-28-2012, 05:03 PM	#13
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Thank you Chad __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-29-2012, 06:53 PM	#16
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Chrome and painted sbc pulleys, swivel water neck Offers??? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.