Chassisworks - Chevy Truck Chassis Kits (Drag Race)

[1Bad62Pro/Street]

Chassisworks → Chassis Kits (Drag Race) → Truck Chassis Kits
http://www.cachassisworks.com/c-112-...ssis-kits.aspx

http://www.loco4fomoco.com/ChassisWorks.pdf

TRUCK E2 A-ARM 82-04 S-10 CHEVY
TRUCK E2 STRUT 4130 55-59 CHEVY 1/2 TON
TRUCK E2 STRUT 4130 60-95 CHEVY 1/2 TON
TRUCK E2 STRUT 4130 82-04 S10 CHEVY
TRUCK E2 STRUT 82-04 S-10 CHEVY
TRUCK ELIM 2 A-ARM 55-59 CHEVY 1/2 TON
TRUCK ELIM 2 A-ARM 60-95 CHEVY 1/2 TON
TRUCK ELIM 2 STRUT 60-95 CHEVY 1/2 TON
TRUCK ELIM STRUT 55-59 CHEVY 1/2 TON

[blacklistcustoms]

We have used these guys in the past and are always available to answer our questions. It also helps that they are fairly local(60 miles) from us. If your in the market, give them a try. Cheers- Nate

[Marv D]

Only thing wrong with Alston (just IMO) is a LOT of their kit is proprietary as in you start with Alston, you are stuck with Alston. Not that I have any qualm about any of the pieces I have bought from them. But when you need a simple rebuild component (i.e. a bushing )and are stuck with making it yourself (if possible) or ordering from Alston. Again not trying to badmouth their stuff. They make a solid chassis and every component they sell. But sometimes it nice to have that 'universal' part that Bickle, S&W, CompEngineering, etc are so fond of.

[fastwillie 696969]

Originally Posted by Marv D

Only thing wrong with Alston (just IMO) is a LOT of their kit is proprietary as in you start with Alston, you are stuck with Alston. Not that I have any qualm about any of the pieces I have bought from them. But when you need a simple rebuild component (i.e. a bushing )and are stuck with making it yourself (if possible) or ordering from Alston. Again not trying to badmouth their stuff. They make a solid chassis and every component they sell. But sometimes it nice to have that 'universal' part that Bickle, S&W, CompEngineering, etc are so fond of.

computer companys do the same thing
i like chris alston .i remember going to there shop about 20 yrs ago ,only a few parts hanging in there show room