Heater distributor box! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Destructo · 10-03-2003, 04:06 PM

I can't seem to get it down to replace my heater core! I only found one bolt and a few of these screw looking things that are round and smooth, but I don't see how they come out? Anyone help me? Do they go thru the firewall or something and have nuts on the other side?

**swervin ervin** · 10-03-2003, 04:18 PM

Yes they go through the firewall. There is one on the inside, way over next to the kick panel. Take the nuts off on the firewall and the one on the inside and it should come out, if everything else is loose.

10-03-2003, 04:06 PM	#1
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Heater distributor box! I can't seem to get it down to replace my heater core! I only found one bolt and a few of these screw looking things that are round and smooth, but I don't see how they come out? Anyone help me? Do they go thru the firewall or something and have nuts on the other side?

10-03-2003, 04:18 PM	#2
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Yes they go through the firewall. There is one on the inside, way over next to the kick panel. Take the nuts off on the firewall and the one on the inside and it should come out, if everything else is loose. __________________ Mike 1985 Chevy C-10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.