OR Parting out 72 Suburban K10 350 TH350 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 06-02-2012, 03:21 AM

Quote:

Originally Posted by lousblown55chevy

need front and rear bumper brackets for a 4x4

I have the front 71-72 only brackets. Nothing at this time on the rear.

Quote:

Originally Posted by Scott Johnson

If you have any plastic plugs left after you take care of tll74 I am interested in a complete set both the small and larger ones.

Thanks
Scott

Scott, Leon is getting all that I have for now.

Quote:

Originally Posted by 1972_GMC

Are the front and rear door panels still available?
Posted via Mobile Device

YES they are.

Quote:

Originally Posted by ThreeQtr

Do you still have the upper molding trim?

Is there a safe and reasonable (price) way to send to 34953?

Yes, the trim would ship in a tube and get there with out damage. 23.00 shipping.

extremesounds13 · 06-13-2012, 12:43 AM

Hey I would like to get the upper trim from you if it is still available; does it still come with all the clips too? I can send money ASAP. Thanks

**tll74** · 06-14-2012, 03:31 AM

Quote:

Originally Posted by extremesounds13

Hey I would like to get the upper trim from you if it is still available; does it still come with all the clips too? I can send money ASAP. Thanks

Hi John, PM sent

Drewbee · 06-14-2012, 10:42 AM

Would you sell the front spring hangers? If so whats your best price
shipped?
Posted via Mobile Device

**tll74** · 06-14-2012, 08:58 PM

Quote:

Originally Posted by Drewbee

Would you sell the front spring hangers? If so whats your best price
shipped?
Posted via Mobile Device

The last two sets I sold here on the parts board sold for 75.00 plus shipping. Shipping would be very close to 15.00, so..90.00 shipped. Thanks, Tom

jeremiah king · 06-21-2012, 04:42 AM

Hey tom is there rear 2nd seadt or 3rd seatbelts? interested pending price. Thanks

Monty · 06-21-2012, 08:04 AM

i'll take the tail light lenses and housings if the back-up lenses are included.

blfuller123 · 06-21-2012, 09:11 AM

Can you give me a price for shipping the rear ac to 75165?

**tll74** · 06-21-2012, 04:23 PM

Quote:

Originally Posted by jeremiah king

Hey tom is there rear 2nd seadt or 3rd seatbelts? interested pending price. Thanks

Sorry, no rear seat belts in this one.

Quote:

Originally Posted by Monty

i'll take the tail light lenses and housings if the back-up lenses are included.

50.00 shipped for what your asking for with the reverse lenses. Do you need the reverse housings?

Quote:

Originally Posted by blfuller123

Can you give me a price for shipping the rear ac to 75165?

65.00 shipping. The cover makes the box oversize. A little less if shipped to a business.

Thanks, Tom

Monty · 06-21-2012, 07:28 PM

Quote:

Originally Posted by tll74

Sorry, no rear seat belts in this one.

50.00 shipped for what your asking for with the reverse lenses. Do you need the reverse housings?

yes, if they are in good shape.

**tll74** · 06-22-2012, 01:08 AM

Quote:

Originally Posted by Monty

yes, if they are in good shape.

How about 60.00 shipped for all of it with the reverse housings. I've already kicked in the lenses. Thanks, Tom

Monty · 06-22-2012, 05:05 PM

sounds good. PM me your addy and i'll get a money order enroute Monday.

thanks, Monty

**tll74** · 06-23-2012, 02:32 AM

Quote:

Originally Posted by Monty

sounds good. PM me your addy and i'll get a money order enroute Monday.

thanks, Monty

PM sent

**tll74** · 07-07-2012, 12:36 PM

ttt, still lots left on this one

**DeadheadNM** · 07-17-2012, 12:16 AM

Tom - Any idea if these exhaust hangers are similar to those on a K20 pickup? I'd take them if so - if possible I'm hoping to use a second set to create a factory looking dual exhaust system but in a small block truck. Could also use an NP205 skid plate if you have one. Thanks, Pete

**tll74** · 07-17-2012, 02:18 AM

Quote:

Originally Posted by DeadheadNM

Tom - Any idea if these exhaust hangers are similar to those on a K20 pickup? I'd take them if so - if possible I'm hoping to use a second set to create a factory looking dual exhaust system but in a small block truck. Could also use an NP205 skid plate if you have one. Thanks, Pete

Hi Pete, Sorry no help on the skid plate. Not to sure on the exhaust. I have a 72 K20 yet to part. I'll look at it and compare to the Sub hangers. Thanks, Tom

**DeadheadNM** · 07-17-2012, 08:39 AM

Tom - Thank you. The ones in the pic resemble those on a spare K20 frame I have but I would need a close-up pic to confirm. My guess is they are the same. Is it too early to get in line for other parts from your K20

Tranny dipstick, upper metal hose, etc........ Pete

**tll74** · 07-18-2012, 12:54 AM

Quote:

Originally Posted by DeadheadNM

Tom - Thank you. The ones in the pic resemble those on a spare K20 frame I have but I would need a close-up pic to confirm. My guess is they are the same. Is it too early to get in line for other parts from your K20

Tranny dipstick, upper metal hose, etc........ Pete

Pete, I didn't get a chance to check the exhaust hangers and compare. I'll try to get the close up pics and do so Wednesday. I think your right though. As for the other parts I have no thread started or any offering from it here on the board so its fair game for anything you may want. It does have the upper radiator tube and TH350 tube and stick. Is a complete truck and I also just bought a 72 GMC K20 also for parts. Put a list together and I'll see what they have. I haven't been parting here lately as my summer time projects around the house have kept me very busy.

75.00 on the upper radiator tube if it is solid. I can also dip it for you at no extra cost.
20.00 for the trans dip stick and tube.
Both plus shipping.
Thanks, Tom

Areohbe · 07-18-2012, 02:13 AM

Do you still have the Rear AC? Would it also fit the 69 Burb? Also do you have the Front A/C set up? What is shipping to 92683?

**DeadheadNM** · 07-18-2012, 08:09 AM

Quote:

Originally Posted by tll74

Pete, I didn't get a chance to check the exhaust hangers and compare. I'll try to get the close up pics and do so Wednesday. I think your right though. As for the other parts I have no thread started or any offering from it here on the board so its fair game for anything you may want. It does have the upper radiator tube and TH350 tube and stick. Is a complete truck and I also just bought a 72 GMC K20 also for parts. Put a list together and I'll see what they have. I haven't been parting here lately as my summer time projects around the house have kept me very busy.

75.00 on the upper radiator tube if it is solid. I can also dip it for you at no extra cost.
20.00 for the trans dip stick and tube.
Both plus shipping.
Thanks, Tom

Tom -

Start a pile when you can. I'll take the upper tube if solid (dip would be great), the 4wd tranny dip stick, and a set of 4wd exhaust hangers. Also interested in a correct 4wd oil dipstick, blue actuator dials, and correct Qjet.

Thanks!

Pete

**restart42** · 07-18-2012, 12:56 PM

Tom,, looking for a 67-72 "Burb non AC battery holder..little or no rust,,,
got one,,,?

Thanks ,,,Pat

**tll74** · 07-18-2012, 04:01 PM

Quote:

Originally Posted by Areohbe

Do you still have the Rear AC? Would it also fit the 69 Burb? Also do you have the Front A/C set up? What is shipping to 92683?

Yes on the rear AC and yes it would fit a 69. I do have the complete front as well for both the 402 and sbc. Are you wanting shipping on front and rear?

Quote:

Originally Posted by DeadheadNM;5492 403

Tom -

Start a pile when you can. I'll take the upper tube if solid (dip would be great), the 4wd tranny dip stick, and a set of 4wd exhaust hangers. Also interested in a correct 4wd oil dipstick, blue actuator dials, and correct Qjet.

Thanks!

Pete

Pete, I'll start you pile. I'll check on the other parts but I have a couple Q's are you needing the dials for a K10 or K20 and what carb number are you looking for?

Quote:

Originally Posted by restart42

Tom,, looking for a 67-72 "Burb non AC battery holder..little or no rust,,,
got one,,,?

Thanks ,,,Pat

Pat, I do have a couple battery trays that have been dipped. I'll look at them and get back with price.

Thanks guys, Tom

**DeadheadNM** · 07-19-2012, 12:15 AM

Cool....keeping an eye out for more blue dials for the K20 and would also consider some for the K10 as well as chrome rings for the K10. Looks like I may have a Q jet coming from another member - should know for sure in next day or two. Thank you.

MikeS. · 07-19-2012, 05:32 AM

Would you have a pitman arm from a 4x4 Burban? I need 1 for an 87 axle & PS gear box. The 4x4 has both ends open. I believe your 72 would work.

Thanks!

**restart42** · 07-19-2012, 12:52 PM

Quote:
Pat, I do have a couple battery trays that have been dipped. I'll look at them and get back with price.
Thanks guys, Tom

No need for 'dipped',, just solid, with little or no rust will do,,,will take
what you got,,,,

Thanks,,,Pat

06-13-2012, 12:43 AM	#27
extremesounds13 Registered User Join Date: Jun 2009 Location: Idaho Falls Idaho Posts: 131	Re: Parting out 72 Suburban K10 350 TH350 Hey I would like to get the upper trim from you if it is still available; does it still come with all the clips too? I can send money ASAP. Thanks

06-14-2012, 10:42 AM	#29
Drewbee Registered User Join Date: Dec 2011 Location: Villa Rica, GA Posts: 330	Re: Parting out 72 Suburban K10 350 TH350 Would you sell the front spring hangers? If so whats your best price shipped? Posted via Mobile Device

06-21-2012, 04:42 AM	#31
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: Parting out 72 Suburban K10 350 TH350 Hey tom is there rear 2nd seadt or 3rd seatbelts? interested pending price. Thanks __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb

06-21-2012, 08:04 AM	#32
Monty Registered User Join Date: Jun 2011 Location: Montana Posts: 78	Re: Parting out 72 Suburban K10 350 TH350 i'll take the tail light lenses and housings if the back-up lenses are included.

06-21-2012, 09:11 AM	#33
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: Parting out 72 Suburban K10 350 TH350 Can you give me a price for shipping the rear ac to 75165?

06-22-2012, 05:05 PM	#37
Monty Registered User Join Date: Jun 2011 Location: Montana Posts: 78	Re: Parting out 72 Suburban K10 350 TH350 sounds good. PM me your addy and i'll get a money order enroute Monday. thanks, Monty

07-07-2012, 12:36 PM	#39
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban K10 350 TH350 ttt, still lots left on this one __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

07-17-2012, 12:16 AM	#40
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	Re: Parting out 72 Suburban K10 350 TH350 Tom - Any idea if these exhaust hangers are similar to those on a K20 pickup? I'd take them if so - if possible I'm hoping to use a second set to create a factory looking dual exhaust system but in a small block truck. Could also use an NP205 skid plate if you have one. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-17-2012, 08:39 AM	#42
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	Re: Parting out 72 Suburban K10 350 TH350 Tom - Thank you. The ones in the pic resemble those on a spare K20 frame I have but I would need a close-up pic to confirm. My guess is they are the same. Is it too early to get in line for other parts from your K20 Tranny dipstick, upper metal hose, etc........ Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-18-2012, 02:13 AM	#44
Areohbe Registered User Join Date: Sep 2011 Location: Southern California Posts: 54	Re: Parting out 72 Suburban K10 350 TH350 Do you still have the Rear AC? Would it also fit the 69 Burb? Also do you have the Front A/C set up? What is shipping to 92683?

07-18-2012, 12:56 PM	#46
restart42 Junior Member Join Date: Apr 2000 Location: Bronx, New York City Posts: 121	Re: Parting out 72 Suburban K10 350 TH350 Tom,, looking for a 67-72 "Burb non AC battery holder..little or no rust,,, got one,,,? Thanks ,,,Pat __________________ Pat 72 GMC Suburban,4X4,402BB

07-19-2012, 12:15 AM	#48
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	Re: Parting out 72 Suburban K10 350 TH350 Cool....keeping an eye out for more blue dials for the K20 and would also consider some for the K10 as well as chrome rings for the K10. Looks like I may have a Q jet coming from another member - should know for sure in next day or two. Thank you. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-19-2012, 05:32 AM	#49
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: Parting out 72 Suburban K10 350 TH350 Would you have a pitman arm from a 4x4 Burban? I need 1 for an 87 axle & PS gear box. The 4x4 has both ends open. I believe your 72 would work. Thanks! __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

07-19-2012, 12:52 PM	#50
restart42 Junior Member Join Date: Apr 2000 Location: Bronx, New York City Posts: 121	Re: Parting out 72 Suburban K10 350 TH350 Quote: Pat, I do have a couple battery trays that have been dipped. I'll look at them and get back with price. Thanks guys, Tom No need for 'dipped',, just solid, with little or no rust will do,,,will take what you got,,,, Thanks,,,Pat __________________ Pat 72 GMC Suburban,4X4,402BB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.