09-04-2012, 10:35 PM | #1 |
Registered User
Join Date: Aug 2012
Location: Steeleville il
Posts: 1
|
4.5 /6 drop prob
im new to the forum just slammed my virgin 85 i did a 4.5/6 magaughys kit and some 22'' boss 338s problem is that the driver side is about a inch lower side to side i checked the seating of the spring and the centering top cup looks to big for the top coil but not horrible i do customs and bodywork for a living so its not my first rodeo just cannot remember having this prob on a 73-87
|
09-05-2012, 08:00 AM | #2 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: 4.5 /6 drop prob
Try swapping the springs side to side & see if the issue follows. If so, it can isolate the issue to the spring. If the prob remains on the same side, your initial assessment of the spring not seating correctly would be where I would focus my attention.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|