Any advice or help installing high hump

[62 bigwindow]

Thought I would ask you guys who have already done this if you had some advice or pointers to help.. I am installing high hump in floor of my 66. Looks to be pretty simple but thought I would ask how other people have done it and if they had any pics of the install....thanks guys

[Captainfab]

Does the '66 cab have a non-removeable low hump? Did you get both pieces for the high hump conversion?

[62 bigwindow]

yes the cab has the non removable low hump.. and i did get both pieces for the high hump. I got the low hump cut out so i could start fitting the 2 high hump pieces in.. just thought I would ask if anybody had some advice or pictures to make install as easy as possible

[Ta2Don]

Watching this thread, will need to do this job on mine in order to run the tranny I want to use...

[Captainfab]

I don't have any install pics, but I do remember seeing some in someone's build thread. I just don't remember who's

I would suggest starting with cutting the hole in the floor, smaller than you think it should be. You can always cut it bigger, but making it smaller is a bit more work.

[DURG]

I have pix in my build thread.