WTB: Edelbrock 1406 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red71cheyenne · 10-20-2003, 12:29 AM

If any of the WA board members have a line on a used 1406 please keep me in mind. I have been looking at the boneyards down here, but have not had any luck. Looking to spend between 50 and a 100 bucks. Thanks, Jeff.

jacquesdean · 10-20-2003, 12:32 AM

I have a Carter AFB performance 600 cfm and a Edelbrock 1406,

$100.00 plus shipping each

red71cheyenne · 10-20-2003, 12:44 AM

Thanks Jock, I'll keep you in mind. I was hoping to get one close and avoid the shipping. Jeff.

red71cheyenne · 10-20-2003, 07:41 PM

ttt

ShamrockCustoms · 10-20-2003, 10:50 PM

I have an Ed 1406 carb, going to switch to higher cfm, so i need to sell. of course, shipping charges would be in effect........let me know....

good luck!

**COBALT** · 10-21-2003, 05:23 PM

Well, jacquesdean isn't going to like this but I have a Carter AFB 9000 series carb also just like the 1406 I rebuilt a few months ago. I got it from oldiron, and it needed a rebuilding so I gave it a serious cleaning, a rebuild kit, new floats, new choke housing and harness. Even new throttle plate screws. I was going to use it, but then my wife surprised me with a brand new 1406 for my birthday.

So, it's freshly rebuilt sitting in my 1406 box in the garage on the shelf. It's ready to go.

$100.00

I have some pics...

**COBALT** · 10-21-2003, 05:29 PM

Here's the link from last August when I first wanted to sell it. No one ended up giving me a serious reply:

http://67-72chevytrucks.com/vboard/s...threadid=66247

...and here's a pic. I have more.

red71cheyenne · 10-21-2003, 08:08 PM

Thats like the same carb isn't it? What CFM is the AFB? Thanks, Jeff.

RON WOODGEARD · 10-22-2003, 07:13 AM

Jeff, That's a 600 CFM. Very good carbs. good price too, for an electric choke.

Ron

**COBALT** · 10-22-2003, 08:18 AM

Yes, it's a 600 CFM carb.

red71cheyenne · 10-22-2003, 09:52 AM

Cobalt, I'll take the carb. My number is (360) 613-9766. I work today and then have duty tomorrow. I am off all weekend though. Let me know how we can hook up. Shamrock, thanks for looking out, but Cobalt is right around the corner. Thanks, Jeff.

**COBALT** · 10-22-2003, 11:08 AM

I'll send you a pm.

10-20-2003, 12:29 AM	#1
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	WTB: Edelbrock 1406 If any of the WA board members have a line on a used 1406 please keep me in mind. I have been looking at the boneyards down here, but have not had any luck. Looking to spend between 50 and a 100 bucks. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

10-20-2003, 12:32 AM	#2
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	carb I have a Carter AFB performance 600 cfm and a Edelbrock 1406, $100.00 plus shipping each __________________ Jock, Powder blasting shop, Alabama

10-20-2003, 12:44 AM	#3
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Thanks Jock, I'll keep you in mind. I was hoping to get one close and avoid the shipping. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

10-21-2003, 05:23 PM	#6
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Well, jacquesdean isn't going to like this but I have a Carter AFB 9000 series carb also just like the 1406 I rebuilt a few months ago. I got it from oldiron, and it needed a rebuilding so I gave it a serious cleaning, a rebuild kit, new floats, new choke housing and harness. Even new throttle plate screws. I was going to use it, but then my wife surprised me with a brand new 1406 for my birthday. So, it's freshly rebuilt sitting in my 1406 box in the garage on the shelf. It's ready to go. $100.00 I have some pics... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

10-21-2003, 05:29 PM	#7
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Here's the link from last August when I first wanted to sell it. No one ended up giving me a serious reply: http://67-72chevytrucks.com/vboard/s...threadid=66247 ...and here's a pic. I have more. Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

10-20-2003, 07:41 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	ttt

10-20-2003, 10:50 PM	#5
ShamrockCustoms Project56 on hold Join Date: Aug 2003 Location: Burleson, TX Posts: 489	I have an Ed 1406 carb, going to switch to higher cfm, so i need to sell. of course, shipping charges would be in effect........let me know.... good luck!

10-21-2003, 08:08 PM	#8
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Thats like the same carb isn't it? What CFM is the AFB? Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

10-22-2003, 07:13 AM	#9
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Jeff, That's a 600 CFM. Very good carbs. good price too, for an electric choke. Ron

10-22-2003, 08:18 AM	#10
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Yes, it's a 600 CFM carb. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

10-22-2003, 09:52 AM	#11
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Cobalt, I'll take the carb. My number is (360) 613-9766. I work today and then have duty tomorrow. I am off all weekend though. Let me know how we can hook up. Shamrock, thanks for looking out, but Cobalt is right around the corner. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 10-22-2003 at 09:54 AM.

10-22-2003, 11:08 AM	#12
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I'll send you a pm. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.