|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-01-2013, 09:31 PM
|
#1 |
|
Registered User
Join Date: Oct 2012
Location: Covington, La
Posts: 16
|
ECE engine mounts and trans problems
hey guys, I ran into a snag yesterday. I have a 99 ls1 out of a camaro and ece mounts going into my 72 c10. I had to remove some material on the engine cradle. no big deal, but my trans seems to be too low at the tailshaft. I also have a ece trans mount. it just seems like it needs to come up some. has anyone else ran into this?
|
|
|
|
01-01-2013, 10:16 PM
|
#2 |
|
Registered User
Join Date: Jul 2006
Location: Ohio
Posts: 83
|
Re: ECE engine mounts and trans problems
What trans do you have?
|
|
|
|
|
01-01-2013, 10:38 PM
|
#3 |
|
Registered User
Join Date: Oct 2012
Location: Covington, La
Posts: 16
|
Re: ECE engine mounts and trans problems
oh sorry, that would help wouldn't it? 4l60e out of the camaro
|
|
|
|
|
01-02-2013, 07:23 AM
|
#4 |
|
Registered User
Join Date: May 2009
Location: Goldsboro NC
Posts: 151
|
Re: ECE engine mounts and trans problems
I an using the same setup in my 67. I put a .50" thick spacer under the trans mount to bring it up a little. Anything thicker and the trans would touch the lip on the cab (bellhousing area)
|
|
|
|
|
01-03-2013, 12:04 PM
|
#5 |
|
Registered User
Join Date: Oct 2012
Location: Covington, La
Posts: 16
|
Re: ECE engine mounts and trans problems
Thank you joe, i have to get me a angle finder and then I'm gonna try your suggestion. I'm gonna see if I can get about 4 degrees negative out of it.
Posted via Mobile Device |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
