Body Parts/Frame Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 11-02-2003, 09:35 PM

Well, I have finally finished the chassis and interior for the most part and am going to begin working on the body. I need 67 front fenders, 67 or 68 hood, good short bed fleetside, and a good shortbed frame. I have plenty of time to wait, I am going to be gone for a while, so I want really nice rust free parts. My original from is a shortened longbed frame, so I would prefer to have an actual shortbed frame. My truck is in Indiana now, I am going to be here for about a week and a half. If I am gone, just e-mail me and my brother will pick up the parts. He is willing to travel. Thanx for any help you can give me.

crazy4chevs · 11-03-2003, 12:51 PM

e-mail sent.

stelth2002 · 11-03-2003, 04:40 PM

I have a hood. I'll send ya a pm.

smonty · 11-03-2003, 05:53 PM

Sent you an email.

Ernie

dalejr8 · 11-03-2003, 11:08 PM

I have 2 swb 2wd rolling chassis in Indiana and a complete front end for a 67

junkyardjohn · 11-03-2003, 11:20 PM

I JUST PICKED UP A 72 SWB 2WD COIL SPRUNG TRUCK. $450 FOR EVERYTHING ON THE FRAME UP TO THE STEERING GEARBOX. OR $200 MINUS THE FRONT & REAR 5 LUG SUSPENSION. I'M NOT TOO AWFUL FAR AWAY IN CARSON CITY NEVADA EITHER.

JOHN

**67sss** · 11-03-2003, 11:38 PM

e-mail sent

NPilot1975 · 11-03-2003, 11:55 PM

Dalejr8, how much do you want for the front end and the frame and where are you located in IN. I am right outside of Richmond IN. Also what kind of shape is the frontend in. I am looking for something completely rust free and almost perfectly straight. Let me know, thanx for the help.

LeRoy · 11-04-2003, 12:17 AM

So are you looking for something near Indiana or Washington.

dalejr8 · 11-04-2003, 12:36 AM

Frame is in great shape 350.00 sheetmetal is not rustfree but not to bad either. I am 2 hours nw of Indy, However I am off work this week I could meet you give me a call 219-746-9910 Thanks, Chris. By the way one is 4 coil springs, and one is leaf spring rear, both are disk front brakes.

11-02-2003, 09:35 PM	#1
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Body Parts/Frame Needed Well, I have finally finished the chassis and interior for the most part and am going to begin working on the body. I need 67 front fenders, 67 or 68 hood, good short bed fleetside, and a good shortbed frame. I have plenty of time to wait, I am going to be gone for a while, so I want really nice rust free parts. My original from is a shortened longbed frame, so I would prefer to have an actual shortbed frame. My truck is in Indiana now, I am going to be here for about a week and a half. If I am gone, just e-mail me and my brother will pick up the parts. He is willing to travel. Thanx for any help you can give me. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

11-03-2003, 12:51 PM	#2
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	e-mail sent. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

11-03-2003, 04:40 PM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I have a hood. I'll send ya a pm. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

11-03-2003, 05:53 PM	#4
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply Sent you an email. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-03-2003, 11:20 PM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	I JUST PICKED UP A 72 SWB 2WD COIL SPRUNG TRUCK. $450 FOR EVERYTHING ON THE FRAME UP TO THE STEERING GEARBOX. OR $200 MINUS THE FRONT & REAR 5 LUG SUSPENSION. I'M NOT TOO AWFUL FAR AWAY IN CARSON CITY NEVADA EITHER. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

11-03-2003, 11:08 PM	#5
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	I have 2 swb 2wd rolling chassis in Indiana and a complete front end for a 67

11-03-2003, 11:38 PM	#7
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,326	e-mail sent

11-03-2003, 11:55 PM	#8
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Dalejr8, how much do you want for the front end and the frame and where are you located in IN. I am right outside of Richmond IN. Also what kind of shape is the frontend in. I am looking for something completely rust free and almost perfectly straight. Let me know, thanx for the help. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

11-04-2003, 12:17 AM	#9
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	So are you looking for something near Indiana or Washington. __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

11-04-2003, 12:36 AM	#10
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	Frame is in great shape 350.00 sheetmetal is not rustfree but not to bad either. I am 2 hours nw of Indy, However I am off work this week I could meet you give me a call 219-746-9910 Thanks, Chris. By the way one is 4 coil springs, and one is leaf spring rear, both are disk front brakes. Last edited by dalejr8; 11-04-2003 at 12:45 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.