upper control arm washers/spacers???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10timmy · 01-10-2013, 06:38 PM

Does anyone know where I can get the concave washers that mount between the frame and upper control arm shaft??. They are about a half an inch thick and are beveled on one side where they fit up against the shaft bolt base. I wore out the search button. Cant find them in my LMC book. Any help would be great, I need four of them. Thanks

Southcity · 01-10-2013, 08:01 PM

I did a quick search and found some on Rock Auto:

http://www.rockauto.com/catalog/x,ca...%2B307cid%2BV8

Pretty sure Napa carries these too among other generic auto parts shops.

c10timmy · 01-10-2013, 09:04 PM

Thanks for the heads up, but that's not what I am looking for. Those are the alignment shims. I need the washers that go behind those.
Posted via Mobile Device

spatz · 01-13-2013, 08:57 PM

are you still looking for some, I have a 68 drum frontend that will go to scrap when warmer weather gets here and its complete so I know they are there.

67ctener · 01-17-2013, 11:51 PM

Lmc sells them
Posted via Mobile Device

DorianB · 01-31-2013, 12:19 PM

Is #10 on the left side what you are looking for?

http://www.lmctruck.com/icatalog/cb/t.aspx?Page=134

01-10-2013, 08:01 PM	#2
Southcity Registered User Join Date: Aug 2007 Location: Redwood City, CA Posts: 1,177	Re: upper control arm washers/spacers???? I did a quick search and found some on Rock Auto: http://www.rockauto.com/catalog/x,ca...%2B307cid%2BV8 Pretty sure Napa carries these too among other generic auto parts shops. __________________ 66 GMC Suburban Custom 66 Chevy K10 Suburban

01-10-2013, 09:04 PM	#3
c10timmy Registered User Join Date: Jul 2012 Location: Hohenwald, TN Posts: 8	Re: upper control arm washers/spacers???? Thanks for the heads up, but that's not what I am looking for. Those are the alignment shims. I need the washers that go behind those. Posted via Mobile Device

01-13-2013, 08:57 PM	#4
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: upper control arm washers/spacers???? are you still looking for some, I have a 68 drum frontend that will go to scrap when warmer weather gets here and its complete so I know they are there.

01-17-2013, 11:51 PM	#5
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: upper control arm washers/spacers???? Lmc sells them Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

01-31-2013, 12:19 PM	#6
DorianB Registered User Join Date: Apr 2010 Location: Buford, Ga Posts: 205	Re: upper control arm washers/spacers???? Is #10 on the left side what you are looking for? http://www.lmctruck.com/icatalog/cb/t.aspx?Page=134 __________________ In my opinion, it works best to have the seat out so you have room to flop your body around while standing on your head. -ashx2

01-10-2013, 06:38 PM	#1
c10timmy Registered User Join Date: Jul 2012 Location: Hohenwald, TN Posts: 8	upper control arm washers/spacers???? Does anyone know where I can get the concave washers that mount between the frame and upper control arm shaft??. They are about a half an inch thick and are beveled on one side where they fit up against the shaft bolt base. I wore out the search button. Cant find them in my LMC book. Any help would be great, I need four of them. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.