60-66 cab on 67-72 chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 02-09-2013, 09:59 PM

I know this has been covered before in small doses, but has anyone actually put a 60-66 body on a 67-72 chassis? I have a nice chassis and was just curious. If anyone has a link or pis PLEASE share them, thanks.

LostMy65 · 02-09-2013, 10:59 PM

These are a few I found:

.
This post: .

Quote:

Originally Posted by Captainfab

On the '71 frame the cab mounts should be in the correct location front to back and side to side. The rear cab mounts I believe will be too low. It seems to me that the radiator support mounts need to be moved also. I don't remember if forward or back. Then of course the front frame horns are shaped for the '67-'72 bumper. Those will need to be cut off and the '63-'66 frame horns welded on if you want to run a '63-'66 bumper.

.
And this thread:

http://67-72chevytrucks.com/vboard/s...ighlight=frame
Posted via Mobile Device

02-09-2013, 09:59 PM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	60-66 cab on 67-72 chassis I know this has been covered before in small doses, but has anyone actually put a 60-66 body on a 67-72 chassis? I have a nice chassis and was just curious. If anyone has a link or pis PLEASE share them, thanks. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.