What did you do to your truck today? - Page 327 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed70 · 07-14-2013, 04:58 PM

Played with mountin my lmc fuel tank under bed but the straps seem awe fuel short so I'm gonna come up with something different...
Posted via Mobile Device

gmcdeadhead · 07-14-2013, 06:14 PM

got my 65 gmc back from body shop the other day , going to be re installing sheet metal . probably going to sell this truck when i get done with it. [IMG]

[/IMG]

zippeay · 07-14-2013, 06:24 PM

Wow! That looks great.
Posted via Mobile Device

**chevy_man5** · 07-15-2013, 11:33 AM

Quote:

Originally Posted by gmcdeadhead

got my 65 gmc back from body shop the other day , going to be re installing sheet metal . probably going to sell this truck when i get done with it. [IMG]

[/IMG]

I've never been a fan of yellow vehicles, but this looks incredible!! Great job!!

kieth · 07-15-2013, 11:39 AM

Quote:

Originally Posted by shortbed70

Played with mountin my lmc fuel tank under bed but the straps seem awe fuel short so I'm gonna come up with something different...
Posted via Mobile Device

The straps on mine went front to back, not side to side ?

http://kieth.smugmug.com/Trucks/66-G...1681&k=jb2dtZs

vgnope · 07-15-2013, 12:10 PM

Shredded the spider gears AGAIN...
Posted via Mobile Device
Posted via Mobile Device

E911manager · 07-15-2013, 01:41 PM

Ran the AC lines under the inner fender and did some more work on the hood....

bmur66 · 07-15-2013, 01:48 PM

Last night I completely disassembled my brand new 4BBL carb and cleaned it thoroughly because when I assembled my AN fuel lines I forgot to clean out one of the lines after cutting it with a dremmel tool. All those little rubber and metal fines sure can make a mess of a carb and you'd be surprised how much just one cut will generate.

T Smith · 07-15-2013, 01:55 PM

Quote:

Originally Posted by bmur66

Last night I completely disassembled my brand new 4BBL carb and cleaned it thoroughly because when I assembled my AN fuel lines I forgot to clean out one of the lines after cutting it with a dremmel tool. All those little rubber and metal fines sure can make a mess of a carb and you'd be surprised how much just one cut will generate.

Been there, done that!

donthekawguy · 07-16-2013, 12:49 AM

Quote:

Originally Posted by bmur66

Last night I completely disassembled my brand new 4BBL carb and cleaned it thoroughly because when I assembled my AN fuel lines I forgot to clean out one of the lines after cutting it with a dremmel tool. All those little rubber and metal fines sure can make a mess of a carb and you'd be surprised how much just one cut will generate.

Imagine what they would do to a cylinder wall if they made it that far.

bmur66 · 07-16-2013, 05:51 AM

Quote:

Originally Posted by donthekawguy

Imagine what they would do to a cylinder wall if they made it that far.

Don't wanna

G-Money · 07-16-2013, 01:41 PM

Installed my boneyard sway bar. Wow what a difference, $50.00 well spent!

If you haven't added one of these yet I would suggest you take the time well worth the money and the little effort to install.

kieth · 07-16-2013, 02:16 PM

Quote:

Originally Posted by g-money

installed my boneyard sway bar. Wow what a difference, $50.00 well spent!

If you haven't added one of these yet i would suggest you take the time well worth the money and the little effort to install.

where are the pictures ? Which one did you use. Was it on a trailing arm suspension or leaf spring????

FetchMeAPepsi · 07-16-2013, 02:34 PM

Yeah, pictures or it didn't happen G-money yo!

G-Money · 07-16-2013, 03:03 PM

Easy fella's ... and by the way it was the front one ... dang near a bolt on, but now I want to do the rear too.

jbgroby · 07-16-2013, 03:28 PM

They be from Missouri!

lasher78 · 07-16-2013, 05:29 PM

well got mine back on four wheels. would post pick but cant for some reason. anyone else have problem with pics?
Posted via Mobile Device

FetchMeAPepsi · 07-16-2013, 06:09 PM

Quote:

Originally Posted by lasher78

well got mine back on four wheels. would post pick but cant for some reason. anyone else have problem with pics?
Posted via Mobile Device

Just upload it to imageshack.com or tinypic.com or windypix.com or any of the places that let you hold a pic for free. Then put it in pic bbcode. You need to know this. A bracket is this key:
[ <---see that?

The code goes OPENBRACKET, then IMG, then CLOSEBRACKET. I cant type it or the board will think im posting a pic, but here's it with a space in it.
[IMG ]
then goes the link to your picture.
then the same bracket code but with a slash.
[/IMG ]
Delete the spaces.

You end up with this:
[IMG ]http://www.tinypic.com/84838322/myCOOLpicHERE.jpg[/IMG ]

Hopefully this ends up showing up right. Again dont forget to delete the spaces in my example.

Vernski · 07-16-2013, 06:29 PM

Quote:

Originally Posted by lasher78

well got mine back on four wheels. would post pick but cant for some reason. anyone else have problem with pics?
Posted via Mobile Device

Yeah I couldn't seem to post any pic's the little window said they were to big and I would have to re-size them manualy. When I asked a Mod he said they were working on the forum and not sure how long it would be goofed up..Vernski

lasher78 · 07-16-2013, 06:39 PM

good to kn im not the only one.....guess just have to wait hopefully they fix it.. thks to all
Posted via Mobile Device

FetchMeAPepsi · 07-16-2013, 06:56 PM

I'm tellin ya guys, you can post any time by using the code I told you about. No need to fix anything on the board because it doesnt use the board, it just grabs the pic from the interwebs.

lasher78 · 07-16-2013, 07:06 PM

Quote:

Originally Posted by FetchMeAPepsi

I'm tellin ya guys, you can post any time by using the code I told you about. No need to fix anything on the board because it doesnt use the board, it just grabs the pic from the interwebs.

thanks..i use my phone to do all this so that seems a little complicated to just snap pic and post...thanks again though...just have to wait for fix
Posted via Mobile Device

FetchMeAPepsi · 07-16-2013, 08:47 PM

Quote:

Originally Posted by lasher78

thanks..i use my phone to do all this so that seems a little complicated to just snap pic and post...thanks again though...just have to wait for fix
Posted via Mobile Device

Technology is great ain't it?

T Smith · 07-16-2013, 09:17 PM

Here's where I am today. The previous owner before the previous owner (I think) managed to take a perfectly simple, well labeled EZ Wiring harness and screw it up beyond description. After driving it for nearly 3 years with ALL the circuits (including lights, etc.) wired to only work with the key on, I decided to straighten things out. This idiot had the ignition and accessory circuits tied to gether via the headlight switch some way that defies logic. The gauge wiring was connected to the front turn signals in the same manner. I can't believe anything worked or that it didn't burn to the ground. Anyhow, after clipping and reconnecting a few wires and some tidying up I'm on the way to having this mess fixed. Thankfully he didn't butcher the harness, only did some strange circuitry.

If was any of you guys that did this, you're an idiot!

TJ's Chevy · 07-16-2013, 09:53 PM

Changed the oil and did some painting on mine today.

07-14-2013, 04:58 PM	#8151
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: What did you do to your truck today? Played with mountin my lmc fuel tank under bed but the straps seem awe fuel short so I'm gonna come up with something different... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-14-2013, 06:14 PM	#8152
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: What did you do to your truck today? got my 65 gmc back from body shop the other day , going to be re installing sheet metal . probably going to sell this truck when i get done with it. [IMG][/IMG]

07-14-2013, 06:24 PM	#8153
zippeay Registered User Join Date: Mar 2012 Location: Hooper Ut Posts: 466	Re: What did you do to your truck today? Wow! That looks great. Posted via Mobile Device

07-15-2013, 12:10 PM	#8156
vgnope Registered User Join Date: Jun 2011 Location: sacramento, ca Posts: 108	Re: What did you do to your truck today? Shredded the spider gears AGAIN... Posted via Mobile Device Posted via Mobile Device Attached Images

07-15-2013, 01:41 PM	#8157
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	Re: What did you do to your truck today? Ran the AC lines under the inner fender and did some more work on the hood.... Attached Images __________________ My Build CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

07-15-2013, 01:48 PM	#8158
bmur66 Registered User Join Date: Feb 2013 Location: Olean, NY Posts: 92	Re: What did you do to your truck today? Last night I completely disassembled my brand new 4BBL carb and cleaned it thoroughly because when I assembled my AN fuel lines I forgot to clean out one of the lines after cutting it with a dremmel tool. All those little rubber and metal fines sure can make a mess of a carb and you'd be surprised how much just one cut will generate. __________________ No Weak Links

07-16-2013, 01:41 PM	#8162
G-Money Registered User Join Date: May 2012 Location: saint cloud, mn Posts: 38	Re: What did you do to your truck today? Installed my boneyard sway bar. Wow what a difference, $50.00 well spent! If you haven't added one of these yet I would suggest you take the time well worth the money and the little effort to install.

07-16-2013, 02:34 PM	#8164
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Re: What did you do to your truck today? Yeah, pictures or it didn't happen G-money yo! __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.

07-16-2013, 03:03 PM	#8165
G-Money Registered User Join Date: May 2012 Location: saint cloud, mn Posts: 38	Re: What did you do to your truck today? Easy fella's ... and by the way it was the front one ... dang near a bolt on, but now I want to do the rear too.

07-16-2013, 03:28 PM	#8166
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today? They be from Missouri! __________________ http://s1299.photobucket.com/user/jb...23904108567829

07-16-2013, 05:29 PM	#8167
lasher78 Registered User Join Date: Jun 2013 Location: harviell, mo Posts: 246	Re: What did you do to your truck today? well got mine back on four wheels. would post pick but cant for some reason. anyone else have problem with pics? Posted via Mobile Device __________________ live like you are dying

07-16-2013, 06:39 PM	#8170
lasher78 Registered User Join Date: Jun 2013 Location: harviell, mo Posts: 246	Re: What did you do to your truck today? good to kn im not the only one.....guess just have to wait hopefully they fix it.. thks to all Posted via Mobile Device __________________ live like you are dying

07-16-2013, 06:56 PM	#8171
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Re: What did you do to your truck today? I'm tellin ya guys, you can post any time by using the code I told you about. No need to fix anything on the board because it doesnt use the board, it just grabs the pic from the interwebs. __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.

07-16-2013, 09:17 PM	#8174
T Smith Registered User Join Date: Jan 2011 Location: Vicksburg, Mississippi Posts: 567	Re: What did you do to your truck today? Here's where I am today. The previous owner before the previous owner (I think) managed to take a perfectly simple, well labeled EZ Wiring harness and screw it up beyond description. After driving it for nearly 3 years with ALL the circuits (including lights, etc.) wired to only work with the key on, I decided to straighten things out. This idiot had the ignition and accessory circuits tied to gether via the headlight switch some way that defies logic. The gauge wiring was connected to the front turn signals in the same manner. I can't believe anything worked or that it didn't burn to the ground. Anyhow, after clipping and reconnecting a few wires and some tidying up I'm on the way to having this mess fixed. Thankfully he didn't butcher the harness, only did some strange circuitry. If was any of you guys that did this, you're an idiot!

07-16-2013, 09:53 PM	#8175
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today? Changed the oil and did some painting on mine today. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.