rear view mirror location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61K10 · 07-22-2013, 01:34 PM

any specs on mirror location between visors? just center it? how far up from the windshield? mine didn't come with one, so no holes. thanks guy's----------

chevy_mike · 07-22-2013, 03:19 PM

IIRC, I think there are three dimpels that line up with the mirror bracket. Drill the dimpels for the screws.

*Sharps40* · 07-22-2013, 03:46 PM

My 64 and 65 had no dimples. I centered it and the lower screws about 1/4" above the lip of the turn out to the windshield
Posted via Mobile Device

Vernski · 07-22-2013, 11:26 PM

Quote:

Originally Posted by Sharps40

My 64 and 65 had no dimples. I centered it and the lower screws about 1/4" above the lip of the turn out to the windshield
Posted via Mobile Device

That's sounds right the factory assembly manual has some measurements. I just found the center measuring from side to side held up the mirror to see good behind me and it was about the same as Sharps position is and it looked good to me, BTW my 65 GMC had no dimples either but it is still cute..vernski

61K10 · 07-23-2013, 11:30 AM

thanks for the info----

low79fx · 07-23-2013, 11:23 PM

See if what you need is in this thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=385415

07-22-2013, 01:34 PM	#1
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	rear view mirror location any specs on mirror location between visors? just center it? how far up from the windshield? mine didn't come with one, so no holes. thanks guy's---------- __________________ 1961 chevy K10 my build is------------61K10 build

07-22-2013, 03:19 PM	#2
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: rear view mirror location IIRC, I think there are three dimpels that line up with the mirror bracket. Drill the dimpels for the screws. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

07-22-2013, 03:46 PM	#3
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: rear view mirror location My 64 and 65 had no dimples. I centered it and the lower screws about 1/4" above the lip of the turn out to the windshield Posted via Mobile Device

07-23-2013, 11:30 AM	#5
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: rear view mirror location thanks for the info---- __________________ 1961 chevy K10 my build is------------61K10 build

07-23-2013, 11:23 PM	#6
low79fx Registered User Join Date: Jun 2008 Location: odessa,tx Posts: 208	Re: rear view mirror location See if what you need is in this thread. http://67-72chevytrucks.com/vboard/s...d.php?t=385415

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.