Fan distance??

[KJSR]

Can anybody tell me the distance from the back of the radiator to the front of the mechanical fan? I have a 64 C10, had a 230 and I'm changing over to a V8. The distance is about 7" which looks like a bunch to me. I'm running the short pump and the 6cyl fan spacer. Thanks

[chevy_mike]

You need a V8 fan shroud. I don't recall the exact setback but with the shroud, the fan should be sticking out of the shroud about 1/2-3/4 of it's thickness.

[Thefojizzle@me.com]

My 65 came with a 350. Not original, of course. They changes out the original fan and put in a larger diameter one to pull more air. My truck was missing the shroud for radiator. It was overheating when I bought it. The fan sat about 5-1/2" ( a little longer than the iPhone vertically) from the radiator with the big spacer. It would work fine when driving. At idle it with spike. Bought a shroud, put original fan back in ( same distance ) and changed the thermostat from a 195f to a 160f. No more problems. Hope that helps.
Posted via Mobile Device

[Thefojizzle@me.com]

Oh yeah, my fan is 3/4 in the shroud and about a 1/4 of it sticks out
Posted via Mobile Device

[six-in-a-row]

When I swapped in a 350, I built a couple brackets and hand bent a new top saddle in my garage and moved the radiator closer to the engine. Short term easy fix until I can build/buy the proper shroud.

[Thefojizzle@me.com]

Whatever you do...... Don't get rid of the shroud mounting brackets!!! They are hard to find and that's what the shroud mount to. I found out the hard way after trying to fabricate something for the shroud to mount to and my radiator guy, that I finally took it to, had a 63 and laughed at what I was trying to do and said "you need the brackets that go right here you knucklehead" finally found them...... Fit like a glove
Posted via Mobile Device

[Rich 5150 69]

As Chevy Mike says find the factory parts for the v8, makes life easier...this is how the fan placement should be for maximum air pull thru radiator.

[KJSR]

Thanks everybody for the replies. Yeah I figured a shroud was in order but can't seem to find one that isn's a bunch of $$

Chevymike, are the shroud mounting brackets in your picture the factory shroud brackets as mentioned by another in this thread? I know I dont have those.

Has anybody used the replacement shroud from Classic Parts? I was curious of the quality....

[Thefojizzle@me.com]

I bought my ground from the truck shop in orange Cali. Perfect fit. $108.00
Posted via Mobile Device

[KJSR]

Thanks!

[Irishbleueyes]

Factory...

[Irishbleueyes]

I added the 18" thermo fan for HD cooling. Distance from the back of the rad to the front of the fan clutch is 6"

[bmur66]

Note the fan clutch. You want that.

[Thefojizzle@me.com]

Ooh, mine is mechanical! Should I get the fan clutch?
Posted via Mobile Device

[Thefojizzle@me.com]

I got my brackets from a local junk yard. $50. U want me to check to see if they have more and I can ship to u? Or do u wanna try and get em urself?
Posted via Mobile Device

[bmur66]

Fan clutch was recommended to me by an expert if you have the room for it.

[Irishbleueyes]

I had a flex fan, complete garbage. The big fan with all those blades and the clutch keeps it cool no problem... Got the fan from Summit racing on Ebay for 45.00 and the clutch from Rock Auto . com

[chevy_mike]

Originally Posted by KJSR

Thanks everybody for the replies. Yeah I figured a shroud was in order but can't seem to find one that isn's a bunch of $$

Chevymike, are the shroud mounting brackets in your picture the factory shroud brackets as mentioned by another in this thread? I know I dont have those.

Has anybody used the replacement shroud from Classic Parts? I was curious of the quality....

Yes those are factory bracket. You'll likely need to find used or build something similar.

[Thefojizzle@me.com]

If u look at chevy_mikes pic u will see the shroud is attached to metal brackets. That's what u need.
Posted via Mobile Device

[KJSR]

Originally Posted by Thefojizzle@me.com

I got my brackets from a local junk yard. $50. U want me to check to see if they have more and I can ship to u? Or do u wanna try and get em urself?
Posted via Mobile Device

Thanks for the offer man! I'm going to fab some up myself. It will give the chance to play with my sheet metal brake I made.

[KJSR]

Thanks for all the replies. It looks like I need to hunt down a shroud that wont break the bank

[Irishbleueyes]

Originally Posted by KJSR

Thanks for all the replies. It looks like I need to hunt down a shroud that wont break the bank

Truckandcarshop.com in Orange Ca