evac with vic. jr - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69trk · 07-31-2013, 06:54 AM

I have a vic jr. intake and i'm running a pvc valve off the rear driverside valve cover to the back of the intake. Then i'm just putting a breather on the passenger front valve cover and capping the little port on the valve cover that is supossed to goto the tb.. Will this be ok? I also have my boost guage getting this reading from the port on the back of the intake also...

BR3W CITY · 07-31-2013, 12:03 PM

I'd think about running it off to a catch can, otherwise I think you might find yourself draining oil out of the intake. Every turbo anything I've had benefited from running the ventilation system to a catch, and it saves pulling oil out of charge pipes.

68GMCCustom · 07-31-2013, 12:22 PM

I run a catch can on both my n/a LSx motors....an LS2 and LY6....both suck oil into the cans when running 3/4 to WOT.

69trk · 07-31-2013, 12:30 PM

I'll check into the catch can... How about the boost guage? will it get an accurate reading from that spot?

07-31-2013, 06:54 AM	#1
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	evac with vic. jr I have a vic jr. intake and i'm running a pvc valve off the rear driverside valve cover to the back of the intake. Then i'm just putting a breather on the passenger front valve cover and capping the little port on the valve cover that is supossed to goto the tb.. Will this be ok? I also have my boost guage getting this reading from the port on the back of the intake also... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

07-31-2013, 12:03 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: evac with vic. jr I'd think about running it off to a catch can, otherwise I think you might find yourself draining oil out of the intake. Every turbo anything I've had benefited from running the ventilation system to a catch, and it saves pulling oil out of charge pipes. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-31-2013, 12:22 PM	#3
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: evac with vic. jr I run a catch can on both my n/a LSx motors....an LS2 and LY6....both suck oil into the cans when running 3/4 to WOT. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-31-2013, 12:30 PM	#4
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: evac with vic. jr I'll check into the catch can... How about the boost guage? will it get an accurate reading from that spot? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.