Pass Side Motor Mount For A 292 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junk4cash · 08-02-2013, 11:18 PM

Swapping the tired old 230 out of my 66 for a fresh 292. Almost ready to put it in the truck but realized the pass side motor mount won't line up. Can I use my stock 230 mount with spacers? or do I need an entire different mount? Thank you for any info and if I need one, does anyone have one?

**Captainfab** · 08-02-2013, 11:42 PM

You will need the shorter motor mount bracket for the passenger side. I should have an extra one. I'd like $20.00 plus shipping.

junk4cash · 08-03-2013, 12:07 AM

Are you sure it's a shorter mount? By looking at it, my 230 mount was TOO short to fit the holes in the block.

**Captainfab** · 08-03-2013, 12:14 AM

I was referring to the bracket that bolts to the frame and the crossmember. That is different for the 292 versus the 230/250. I do not have any of the brackets between the motor mount and the block.

08-02-2013, 11:18 PM	#1
junk4cash Registered User Join Date: Dec 2011 Location: Kansas City, Mo Posts: 160	Pass Side Motor Mount For A 292 Swapping the tired old 230 out of my 66 for a fresh 292. Almost ready to put it in the truck but realized the pass side motor mount won't line up. Can I use my stock 230 mount with spacers? or do I need an entire different mount? Thank you for any info and if I need one, does anyone have one?

08-02-2013, 11:42 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Pass Side Motor Mount For A 292 You will need the shorter motor mount bracket for the passenger side. I should have an extra one. I'd like $20.00 plus shipping. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-03-2013, 12:07 AM	#3
junk4cash Registered User Join Date: Dec 2011 Location: Kansas City, Mo Posts: 160	Re: Pass Side Motor Mount For A 292 Are you sure it's a shorter mount? By looking at it, my 230 mount was TOO short to fit the holes in the block.

08-03-2013, 12:14 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Pass Side Motor Mount For A 292 I was referring to the bracket that bolts to the frame and the crossmember. That is different for the 292 versus the 230/250. I do not have any of the brackets between the motor mount and the block. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.