CA Cpp stock height disk brake spindle 1970 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djw32 · 08-30-2013, 06:43 PM

Hello,

These are from my 1970 C-10. Cpp stock height disk brake spindle.

$100 for the set. I will ship these.

sold.

**70STOVEBOLT** · 08-31-2013, 09:06 AM

What ball joints and tie rod ends would need to be used with these? And is that $100 shipped?

**lolife99** · 08-31-2013, 09:08 AM

IF these are 63-70 conversion stock height spindles,... they use 63-70 balljoints and outer tie rods.
(which also means they will fit any 63-70 trucks)

**70STOVEBOLT** · 08-31-2013, 09:10 AM

Is there an aftermarket spindle made for disc brakes that uses 63-70 parts?

**lolife99** · 08-31-2013, 09:21 AM

Quote:

Originally Posted by 70STOVEBOLT

Is there an aftermarket spindle made for disc brakes that uses 63-70 parts?

I belive that is what these are.
Title says CPP.

Most spindle companies make stock height and drop spindles in the following years.
60-62
63-70
71-72
73-87

**70STOVEBOLT** · 08-31-2013, 09:29 AM

Keith, I should have read your links in your sig before posting. I completely missed the Cpp in the title. Thanks for the excellent info. djw32 I will take these pending total shipped.

19stepSide72 · 08-31-2013, 11:54 AM

I will jump in line just In case. Was going to buy these this weekend on cpp.
Posted via Mobile Device

djw32 · 08-31-2013, 04:36 PM

70stovebolt,

They are yours. I send you a PM as well.

djw32 · 08-31-2013, 04:47 PM

Keith,

Thanks for the help. I feel like I owe you a commission check. Although, that's probably not going to happen.

**70STOVEBOLT** · 09-03-2013, 12:46 PM

David, so $100 shipped?

Thanks,
Mark

djw32 · 09-04-2013, 12:29 AM

Yes, $100 shipped. Pm sent.
Posted via Mobile Device

**70STOVEBOLT** · 09-11-2013, 08:11 AM

David, I have to pass on these, I sent you a pm explaining why. I apologize to everyone involved in this thread, but a family crisis has come up that I must attend to.

Thanks,
Mark

19stepSide72 · 09-12-2013, 10:22 AM

A money order is on its way. Rob.
Posted via Mobile Device

djw32 · 09-13-2013, 09:11 AM

Thank you.
Posted via Mobile Device

19stepSide72 · 09-26-2013, 08:17 PM

Received. Thank you.
Posted via Mobile Device

08-30-2013, 06:43 PM	#1
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Cpp stock height disk brake spindle 1970 Hello, These are from my 1970 C-10. Cpp stock height disk brake spindle. $100 for the set. I will ship these. sold. Attached Images Last edited by djw32; 08-31-2013 at 04:37 PM.

08-31-2013, 09:06 AM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,537	Re: Cpp stock height disk brake spindle 1970 What ball joints and tie rod ends would need to be used with these? And is that $100 shipped? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-31-2013, 09:08 AM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: Cpp stock height disk brake spindle 1970 IF these are 63-70 conversion stock height spindles,... they use 63-70 balljoints and outer tie rods. (which also means they will fit any 63-70 trucks) __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-31-2013, 09:10 AM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,537	Re: Cpp stock height disk brake spindle 1970 Is there an aftermarket spindle made for disc brakes that uses 63-70 parts? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-31-2013, 09:29 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,537	Re: Cpp stock height disk brake spindle 1970 Keith, I should have read your links in your sig before posting. I completely missed the Cpp in the title. Thanks for the excellent info. djw32 I will take these pending total shipped. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-31-2013, 11:54 AM	#7
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Cpp stock height disk brake spindle 1970 I will jump in line just In case. Was going to buy these this weekend on cpp. Posted via Mobile Device

08-31-2013, 04:36 PM	#8
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 70stovebolt, They are yours. I send you a PM as well. Last edited by djw32; 08-31-2013 at 04:46 PM.

08-31-2013, 04:47 PM	#9
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 Keith, Thanks for the help. I feel like I owe you a commission check. Although, that's probably not going to happen.

09-03-2013, 12:46 PM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,537	Re: Cpp stock height disk brake spindle 1970 David, so $100 shipped? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-04-2013, 12:29 AM	#11
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 Yes, $100 shipped. Pm sent. Posted via Mobile Device

09-11-2013, 08:11 AM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,537	Re: Cpp stock height disk brake spindle 1970 David, I have to pass on these, I sent you a pm explaining why. I apologize to everyone involved in this thread, but a family crisis has come up that I must attend to. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-12-2013, 10:22 AM	#13
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Cpp stock height disk brake spindle 1970 A money order is on its way. Rob. Posted via Mobile Device

09-13-2013, 09:11 AM	#14
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 Thank you. Posted via Mobile Device

09-26-2013, 08:17 PM	#15
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Cpp stock height disk brake spindle 1970 Received. Thank you. Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.