Wanted: Half shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mach158 · 12-08-2003, 02:58 AM

I'm looking for a half shaft for a 89 chevy silverado 1500 4x4. Need it NOW but not looking to spend a fortune. I know i can get one for $70 new but i can't afford that i need one cheap as i ended up with the wrong one and i'm pretty much broke. Hoping someone has something i can use.

mach158 · 12-18-2003, 02:57 AM

Anybody? If ya don't have one could you look around in the junkyards for me please? I need one and i can't quite afford the new one, teen on a budget sucks. Not looking for anykid of handout but something cheap.

mach158 · 12-22-2003, 12:28 AM

Gonna try one last time.

rockcrawler · 12-22-2003, 05:28 PM

if they are the same for a gmc 2500, I have two, what do you want to spend, where are you located?

mach158 · 12-22-2003, 07:18 PM

I sent you an e-mail.

mach158 · 12-25-2003, 10:15 PM

rockcrawler, did you get my e-mail?

mach158 · 12-31-2003, 11:52 PM

TTT

rockcrawler - did you get the e-mail i sent you?

mach158 · 01-20-2004, 07:08 PM

Are these things rare or just no one has any? I have had a few people say they had one but then never hear back from them.

So if you have one that will work for a 1989 Chevy k1500 please reply or e-mail me.

beamers69 · 01-20-2004, 09:47 PM

I might have one, got a totaled 92 Z71, which
shaft is it?

mach158 · 01-20-2004, 09:52 PM

I need the drivers side half shaft. How much are you looking to get for it? Also could i get some measurements? Like distance between the rubber boots on the shaft and total length? Just wanna make sure it will work.

beamers69 · 01-23-2004, 09:17 AM

Didn't see any rubber boots, distance from u-joint to u-joint
is 31 1/2 inches. Here's a Pic. If the rain holds off I plan to
take it off this weekend, clean it up put on a coat of paint
and post on EBAY.

mach158 · 01-23-2004, 05:05 PM

That is the front driveshaft. I need the drive front axle. Connects front differential to the tire.

beamers69 · 01-24-2004, 06:52 AM

Woe is me....when u said shaft thats what I
thought you were a looking for. No wonder
I didnt see any rubber. I do believe I know
what you are talking about now will get
measurements and email you when the sun
comes up.
Thanks
Don

99-2door · 02-02-2004, 08:03 AM

Quote:

Originally posted by mach158
Are these things rare or just no one has any? I have had a few people say they had one but then never hear back from them.

So if you have one that will work for a 1989 Chevy k1500 please reply or e-mail me.

I think it is just that you already said you don't want to spend $70. After you pay $25 + to have the thing shipped, nobody want to go to the trouble and sell a part for dirt.

mach158 · 02-02-2004, 03:41 PM

I can understand that, plus i been without one for so long i will be getting my taxes shortly so i will be able to get a new one.

12-08-2003, 02:58 AM	#1
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	Wanted: Half shaft I'm looking for a half shaft for a 89 chevy silverado 1500 4x4. Need it NOW but not looking to spend a fortune. I know i can get one for $70 new but i can't afford that i need one cheap as i ended up with the wrong one and i'm pretty much broke. Hoping someone has something i can use.

01-20-2004, 09:47 PM	#9
beamers69 Active Member Join Date: Aug 2003 Location: Pearl, Mississippi Posts: 195	I might have one, got a totaled 92 Z71, which shaft is it? Attached Images __________________ 69_67_92 C-10 Drivable/Under Construction 2002 Impala 1999 Toyota 4-runner

01-23-2004, 09:17 AM	#11
beamers69 Active Member Join Date: Aug 2003 Location: Pearl, Mississippi Posts: 195	Didn't see any rubber boots, distance from u-joint to u-joint is 31 1/2 inches. Here's a Pic. If the rain holds off I plan to take it off this weekend, clean it up put on a coat of paint and post on EBAY. Attached Images __________________ 69_67_92 C-10 Drivable/Under Construction 2002 Impala 1999 Toyota 4-runner

01-24-2004, 06:52 AM	#13
beamers69 Active Member Join Date: Aug 2003 Location: Pearl, Mississippi Posts: 195	Woe is me....when u said shaft thats what I thought you were a looking for. No wonder I didnt see any rubber. I do believe I know what you are talking about now will get measurements and email you when the sun comes up. Thanks Don __________________ 69_67_92 C-10 Drivable/Under Construction 2002 Impala 1999 Toyota 4-runner

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-18-2003, 02:57 AM	#2
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	Anybody? If ya don't have one could you look around in the junkyards for me please? I need one and i can't quite afford the new one, teen on a budget sucks. Not looking for anykid of handout but something cheap.

12-22-2003, 12:28 AM	#3
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	Gonna try one last time.

12-22-2003, 05:28 PM	#4
rockcrawler Registered User Join Date: Dec 2003 Location: milwaukee Posts: 19	if they are the same for a gmc 2500, I have two, what do you want to spend, where are you located?

12-22-2003, 07:18 PM	#5
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	I sent you an e-mail.

12-25-2003, 10:15 PM	#6
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	rockcrawler, did you get my e-mail?

12-31-2003, 11:52 PM	#7
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	TTT rockcrawler - did you get the e-mail i sent you?

01-20-2004, 07:08 PM	#8
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	Are these things rare or just no one has any? I have had a few people say they had one but then never hear back from them. So if you have one that will work for a 1989 Chevy k1500 please reply or e-mail me.

01-20-2004, 09:52 PM	#10
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	I need the drivers side half shaft. How much are you looking to get for it? Also could i get some measurements? Like distance between the rubber boots on the shaft and total length? Just wanna make sure it will work.

01-23-2004, 05:05 PM	#12
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	That is the front driveshaft. I need the drive front axle. Connects front differential to the tire.

02-02-2004, 03:41 PM	#15
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	I can understand that, plus i been without one for so long i will be getting my taxes shortly so i will be able to get a new one.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.