Decent finds at Fall Carlisle

[aerotruk63]

He's asking $17,900 but he's negotiable. I told him to come to this site to promote his truck. You know, when I think how much I'm spending on my 4WD project, this would be everything that I wanted. But it's not a 63!

[yelmer]

I will take it how do you want paid? thanks . I have a 66 but it works for me thanks

[aerotruk63]

I'm holding off for a 63 owner since it is hard to find.

[yelmer]

fine

[factorystock]

Originally Posted by aerotruk63

H in the serial number indicates it was Cali built. What plant again factorystock?
The present owner was told it's from Oregon.
Beautiful seat in this truck. Don't know if it's the correct vinyl, but wow.
and 3 nub 15" wheels ( wheels should be black like the spare).

Very nicely preserved '64. Its always a treat when these type of vehicles show up at swap meets to check out. H is the code for Fremont in '64, changed to Z in '65. So this truck was built on the West Coast, the body color firewall backs this up. Seat is the correct pattern and colors for '64 and '65 ( Check the Lambrecht autions to verify this). Can not tell if it is original upholstery or was redone with NOS fabric though. This is an early production '64 with the white steering column and wheel, later built '64s have the fawn steering column and wheel.THe rims on this truck are actually 16". Only a trained eye for proof, maybe the owner can verify this for me. And rims, of course, should be black like the spare.

[aerotruk63]

Factorystock, thank you, are the 3 nubs correct or should it have 4.

[aerotruk63]

The floor mat is going to 60-66 for his project. Thanks for your interest.

[1963c-10]

Hey aero...did the mat find a home? Just got your message about being in town....Im up in Winchester Va up in the mountains until tonight.

[factorystock]

Originally Posted by aerotruk63

Factorystock, thank you, are the 3 nubs correct or should it have 4.

3 nubs are correct.

[oem4me]

Originally Posted by aerotruk63

I was fortunate / blessed enough to have had the company I drive for, organize a load so I could spend the weekend in Carlisle parked at the Flying J, hooked up to IdleAire. I'd like to share their good intentions with others by offering the spoils of the trip. Not everyone can afford to come here so I took it upon myself to pick up stuff that I think members can use.
Moderators though the items are not offered for free they are non profit. Hope this doesn't break any rules

I purchased the painted 1966 3/4-1 ton 8 7/8" inner diameter that needs work for $20. Anyone in need?

I also got the three Chrome 61-63 3/4-1 ton 8 7/8" ID hubcaps, dings and dents but driver quality, $75



Along with them came a 10 3/16" 1/2 ton cap that someone tried to caulk a 8 7/8" ring into. If I can get the ring out without any damage there's a set of 4 driver quality up for grabs + 1 cracked . $120 You can see the caulking and the joint at the 11 o'clock position.

Update: a trip to the dollar store for a utility knife and I was able to cut away the caulking and remove the ring without any damage to the cap or me! lol

Hey Norm, still got those '61-'63 3/4 ton caps? I'm wanting to put the correct caps on my '62. These would be nice. I also want to salvage some 8-7/8 rings for retrofitting to new '66 repro caps. Whatcha got?

[60-66]

Originally Posted by aerotruk63

The floor mat is going to 60-66 for his project. Thanks for your interest.

Got it ! Thanks Aero, very nice matt. Much appreciated...........

[aerotruk63]

I have the 66 8 7/8 hubcap as well as the ring I removed from the 10 3/16 cap. I send those off with the 61-63 8 7/8 caps as requested.

[1963c-10]

Hey Aerotruck63....did you get my emails I sent at the address you sent? I was out of town when you came through last time. When will you be back down this way?