Torque converter bolt patterns - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Matt Cramer · 10-10-2013, 08:49 PM

So, I'm putting a TH350 behind an 4.8 LSx, using the TH350's torque converter. I've heard some flexplates have to be enlarged slightly, like in this picture:

Mine doesn't need to be enlarged slightly, though - it needs a LOT more! Did I get some other size torque converter, like maybe a 10.75" bolt pattern? If so, is there an off the shelf flexplate for it? This may be a bit too much Demelling for my taste.

Matt Cramer · 10-11-2013, 08:29 AM

Follow up - double checked measurements, torque converter is definitely the 10.75" bolt pattern. Does this build need a different flexplate, or a different torque converter?

Matt Cramer · 10-11-2013, 09:32 AM

Should have checked the Summit catalog before posting; I'd have answered my own question.

http://www.summitracing.com/parts/ad...make/chevrolet

10-10-2013, 08:49 PM	#1
Matt Cramer Registered User Join Date: Apr 2012 Location: Covington, GA Posts: 386	Torque converter bolt patterns So, I'm putting a TH350 behind an 4.8 LSx, using the TH350's torque converter. I've heard some flexplates have to be enlarged slightly, like in this picture: Mine doesn't need to be enlarged slightly, though - it needs a LOT more! Did I get some other size torque converter, like maybe a 10.75" bolt pattern? If so, is there an off the shelf flexplate for it? This may be a bit too much Demelling for my taste. __________________ Matt Cramer 1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD 4.8 LS build thread

10-11-2013, 08:29 AM	#2
Matt Cramer Registered User Join Date: Apr 2012 Location: Covington, GA Posts: 386	Re: Torque converter bolt patterns Follow up - double checked measurements, torque converter is definitely the 10.75" bolt pattern. Does this build need a different flexplate, or a different torque converter? __________________ Matt Cramer 1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD 4.8 LS build thread

10-11-2013, 09:32 AM	#3
Matt Cramer Registered User Join Date: Apr 2012 Location: Covington, GA Posts: 386	Re: Torque converter bolt patterns Should have checked the Summit catalog before posting; I'd have answered my own question. http://www.summitracing.com/parts/ad...make/chevrolet __________________ Matt Cramer 1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD 4.8 LS build thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.