TX Garage clean out (again...) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 10-28-2013, 11:26 AM

I have a few items I need to clean out of my garage/attic. Everything is pickup in Richardson (North D/FW), unless it will fit in a "anything that will fit in a box and ship for one rate" box. I absolutely hate shipping.

1. Complete rebuilt control arms w/ poly bushings. Arms were cleaned and painted, then new parts installed. Ball joints are Moog, bushings are Energy suspension (black). I also have a set of inner and outer tie rods with new ES boots. $300 takes all of it.

2. One piece back glass, with pretty decent dark tint. $30. Just sitting in my attic, waiting on it's new forever home.

3. rear drop shocks. These are new, installed but never used. $30. Not sure of the brand, but they are white, if that helps. These will probably ship as well.

4. Pair of factory aluminum wheels. Could use refinishing, as the clear is peeling a bit. Also free, but I only have a pair.

5. Rebuilt 350 (about 15K ago) with Vortec heads, aluminum intake, Holley carb, etc. Complete with accessories air cleaner to pan. $900. This would repower a truck, or even help one out with no engine. You can have everything; going LS.

There is probably some more random stuff in my attic, but this is stuff that really needs to move. It is too nice to pitch, so if someone can use it, I would like to see it go to a good home.

I don't have pics of any of this at work, but a lot of it is exactly what you would expect. Just need to get this stuff gone.

BigMike608 · 10-28-2013, 01:09 PM

are the wheels 15x8 rallies, if so I'll take them

8lugnutz · 10-28-2013, 01:14 PM

Jonboy, I'll take the 20 gal tanks.

8lugnutz · 10-28-2013, 01:16 PM

Oh, and the column too. :-)

Jonboy · 10-28-2013, 02:03 PM

Quote:

Originally Posted by BigMike608

are the wheels 15x8 rallies, if so I'll take them

Mike, these are the aluminum ones with 8 (I think) round holes.

Quote:

Originally Posted by 8lugnutz

Jonboy, I'll take the 20 gal tanks.

Quote:

Originally Posted by 8lugnutz

Oh, and the column too. :-)

No sweat. Let me know when you are out this way. Honestly, the sooner the better works for me. They are all out, ready to go.

8lugnutz · 10-28-2013, 02:07 PM

I will be in Plano tomorrow, just let me know when you will be there and I'll drop by

Jonboy · 10-28-2013, 02:28 PM

I usually don't get home until after 7, but I can put the parts behind the garage. I will send a PM with my contact info.

wingnut78 · 10-30-2013, 10:28 AM

Do you still have the bed? What side is gas door on? Thanks.

Jonboy · 10-30-2013, 01:30 PM

I do have the bed. It has the fuel doors on both sides (dual tanks).

wingnut78 · 10-30-2013, 05:44 PM

Good, i only have passenger side tank right now. Do you have any pictures of the bed you could send me?

Jonboy · 10-30-2013, 06:21 PM

I think I may have some at home. PM me your email address and I will send them.

beamn7 · 10-30-2013, 07:57 PM

Would you consider shipping the control arms to CA? (just the arms, don't need the tie rod ends) and if so, how much? Thanks in advance,

Jonboy · 10-31-2013, 02:03 PM

Quote:

Originally Posted by beamn7

Would you consider shipping the control arms to CA? (just the arms, don't need the tie rod ends) and if so, how much? Thanks in advance,

I would do the arms for $250 + shipping. Not sure if the lowers would fit together in a flat rate box, but I could probably figure something out.

beamn7 · 10-31-2013, 10:16 PM

Quote:

Originally Posted by Jonboy

I would do the arms for $250 + shipping. Not sure if the lowers would fit together in a flat rate box, but I could probably figure something out.

PM Sent

Jonboy · 11-11-2013, 10:57 AM

Post edited to clean up sold items

chris1htx · 11-18-2013, 12:36 PM

How many miles do you have on the engine?

Jonboy · 11-18-2013, 12:39 PM

I was told it had 15K or so on the rebuild. I have only put 30 or so on it personally.

chris1htx · 11-18-2013, 12:40 PM

Do you have any pics of it?

Jonboy · 11-18-2013, 12:53 PM

I will try to get some tonight. PM me your email addy, and I will send them that way.

custom97 · 11-20-2013, 11:31 AM

If Chris isn't interested I'd like some pics of the engine as well.

Jonboy · 11-20-2013, 12:27 PM

The only ones I have here at work are in my build thread, right at the beginning. http://67-72chevytrucks.com/vboard/s...d.php?t=582578

Yetibob · 11-21-2013, 05:10 PM

hello, new guy on the forums here. Am I reading that post right, are the wheels just come by and get them...no charge? I just bought a 79 C10 and I have been looking for a pair of those wheels. I work in Richardson and could maybe come by and take them off your hands if you haven't gotten rid of them yet.

Jonboy · 11-21-2013, 07:48 PM

The wheels are still in my attic. If you have a use for them, you are welcome to them. Since you work in Richardson, I can set them out and you can pick them up when you would like. just give me a day or so heads up, and I will set them out by the garage. I don't want to leave them out for long; Code Enforcement seems to like sending me letters.

Need any 1/2 ton 2wd front end rebuild parts? I will make a heck of a deal.

10-28-2013, 11:26 AM	#1
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Garage clean out (again...) I have a few items I need to clean out of my garage/attic. Everything is pickup in Richardson (North D/FW), unless it will fit in a "anything that will fit in a box and ship for one rate" box. I absolutely hate shipping. 1. Complete rebuilt control arms w/ poly bushings. Arms were cleaned and painted, then new parts installed. Ball joints are Moog, bushings are Energy suspension (black). I also have a set of inner and outer tie rods with new ES boots. $300 takes all of it. 2. One piece back glass, with pretty decent dark tint. $30. Just sitting in my attic, waiting on it's new forever home. 3. rear drop shocks. These are new, installed but never used. $30. Not sure of the brand, but they are white, if that helps. These will probably ship as well. 4. Pair of factory aluminum wheels. Could use refinishing, as the clear is peeling a bit. Also free, but I only have a pair. 5. Rebuilt 350 (about 15K ago) with Vortec heads, aluminum intake, Holley carb, etc. Complete with accessories air cleaner to pan. $900. This would repower a truck, or even help one out with no engine. You can have everything; going LS. There is probably some more random stuff in my attic, but this is stuff that really needs to move. It is too nice to pitch, so if someone can use it, I would like to see it go to a good home. I don't have pics of any of this at work, but a lot of it is exactly what you would expect. Just need to get this stuff gone. __________________ 1974 Jimmy- 5.3/4L80e/NP241 Last edited by Jonboy; 11-11-2013 at 10:50 AM.

10-28-2013, 01:09 PM	#2
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: Garage clean out (again...) are the wheels 15x8 rallies, if so I'll take them __________________ 1977 SWB C10 - "Woodson": 5.3 Vortec LS Swap, 4L60e Trans, 4.5/5 drop

10-28-2013, 01:14 PM	#3
8lugnutz Registered User Join Date: Jul 2013 Location: Canton, TX Posts: 245	Re: Garage clean out (again...) Jonboy, I'll take the 20 gal tanks. __________________ 1980 Chevy K10 Silverado --> Build Page My wife told me I spent too much time on Facebook. So I bought an old truck. Now she wishes I was on Facebook, it was cheaper.

10-28-2013, 01:16 PM	#4
8lugnutz Registered User Join Date: Jul 2013 Location: Canton, TX Posts: 245	Re: Garage clean out (again...) Oh, and the column too. :-) __________________ 1980 Chevy K10 Silverado --> Build Page My wife told me I spent too much time on Facebook. So I bought an old truck. Now she wishes I was on Facebook, it was cheaper.

10-28-2013, 02:07 PM	#6
8lugnutz Registered User Join Date: Jul 2013 Location: Canton, TX Posts: 245	Re: Garage clean out (again...) I will be in Plano tomorrow, just let me know when you will be there and I'll drop by __________________ 1980 Chevy K10 Silverado --> Build Page My wife told me I spent too much time on Facebook. So I bought an old truck. Now she wishes I was on Facebook, it was cheaper.

10-28-2013, 02:28 PM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) I usually don't get home until after 7, but I can put the parts behind the garage. I will send a PM with my contact info. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-30-2013, 10:28 AM	#8
wingnut78 Registered User Join Date: Jun 2013 Location: Fate, Tx Posts: 12	Re: Garage clean out (again...) Do you still have the bed? What side is gas door on? Thanks.

10-30-2013, 01:30 PM	#9
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) I do have the bed. It has the fuel doors on both sides (dual tanks). __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-30-2013, 05:44 PM	#10
wingnut78 Registered User Join Date: Jun 2013 Location: Fate, Tx Posts: 12	Re: Garage clean out (again...) Good, i only have passenger side tank right now. Do you have any pictures of the bed you could send me?

10-30-2013, 06:21 PM	#11
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) I think I may have some at home. PM me your email address and I will send them. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-30-2013, 07:57 PM	#12
beamn7 Registered User Join Date: Oct 2011 Location: Wildomar, CA Posts: 466	Re: Garage clean out (again...) Would you consider shipping the control arms to CA? (just the arms, don't need the tie rod ends) and if so, how much? Thanks in advance,

11-11-2013, 10:57 AM	#15
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) Post edited to clean up sold items __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-18-2013, 12:36 PM	#16
chris1htx Registered User Join Date: Jan 2013 Location: Houston, TX Posts: 178	Re: Garage clean out (again...) How many miles do you have on the engine?

11-18-2013, 12:39 PM	#17
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) I was told it had 15K or so on the rebuild. I have only put 30 or so on it personally. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-18-2013, 12:40 PM	#18
chris1htx Registered User Join Date: Jan 2013 Location: Houston, TX Posts: 178	Re: Garage clean out (again...) Do you have any pics of it?



Register or Log In To remove these advertisements.

11-18-2013, 12:53 PM	#19
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) I will try to get some tonight. PM me your email addy, and I will send them that way. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-20-2013, 11:31 AM	#20
custom97 Registered User Join Date: Aug 2011 Location: Houston, TX Posts: 170	Re: Garage clean out (again...) If Chris isn't interested I'd like some pics of the engine as well. __________________ '86 C10 swb 5/5 drop http://67-72chevytrucks.com/vboard/s...55#post6239155

11-20-2013, 12:27 PM	#21
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) The only ones I have here at work are in my build thread, right at the beginning. http://67-72chevytrucks.com/vboard/s...d.php?t=582578 __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-21-2013, 05:10 PM	#22
Yetibob Registered User Join Date: Nov 2013 Location: Bellevue Nebraska Posts: 14	Re: Garage clean out (again...) hello, new guy on the forums here. Am I reading that post right, are the wheels just come by and get them...no charge? I just bought a 79 C10 and I have been looking for a pair of those wheels. I work in Richardson and could maybe come by and take them off your hands if you haven't gotten rid of them yet.

11-21-2013, 07:48 PM	#23
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Garage clean out (again...) The wheels are still in my attic. If you have a use for them, you are welcome to them. Since you work in Richardson, I can set them out and you can pick them up when you would like. just give me a day or so heads up, and I will set them out by the garage. I don't want to leave them out for long; Code Enforcement seems to like sending me letters. Need any 1/2 ton 2wd front end rebuild parts? I will make a heck of a deal. __________________ 1974 Jimmy- 5.3/4L80e/NP241

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.