LSx power steering and drive shaft ?'s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 01-05-2014, 08:05 PM

The shop wanted my old fitting off the orignal power steering pump. Is that all they need to swap it out? I got it out and was wondering if they needed anything else. They have new hoses already for it.They wanted a new yoke for the drive shaft also, said the one on it now didn't fit the 4l80e trans. I thought 700 r4's and the 4l80e were the same size. I don't have the yoke but he said he could get one. Just wondering going tomorrow to take them the P/S fitting.

crazy longhorn · 01-05-2014, 09:10 PM

The shop told you straight, On both counts....Longhorn

BR3W CITY · 01-05-2014, 09:39 PM

....Did you pay a shop to do the swap, and the come here second guessing them?

wag of the finger

-T- · 01-05-2014, 09:57 PM

4160's and 700's are the same but the 4l80 are much bigger yoke. I have had some power steering lines screw right into the new power steering pumps and some have to be adapted... so I'm sure Hawks is steering you right.

Good luck

**truckdude239** · 01-05-2014, 10:20 PM

I just swaped the fittings and used the stock 71 lines

ls1nova71 · 01-06-2014, 04:46 AM

4l80e uses the same yoke as a 400 turbo.

Andy4639 · 01-06-2014, 09:22 AM

Thanks for the info guy's.
No I'm not second guessing just want to make sure thats all I needed before I make the trip over there. Don't want to make the trip and findout I needed something else is all.

solidaxel · 01-06-2014, 05:37 PM

Quote:

Originally Posted by truckdude239

I just swaped the fittings and used the stock 71 lines

That is what I did on my 78

solidaxel · 01-06-2014, 05:39 PM

Quote:

Originally Posted by ls1nova71

4l80e uses the same yoke as a 400 turbo.

The TH350 in the 78 fit in the 4L60E

Andy4639 · 01-06-2014, 06:37 PM

All is good. Took the fittings and old lines back just incase and they needed the length for the new ones. The yoke on the old shaft was to small + they had to cut it down 1 1/2" to fit so that is done also.

ls1nova71 · 01-06-2014, 10:03 PM

Quote:

Originally Posted by solidaxel

The TH350 in the 78 fit in the 4L60E

Yes that is correct, 350 turbo is the same as 700r4/4l60e, and the 4l80 is the same as a 400 turbo, basically just with overdrive added.

BR3W CITY · 01-07-2014, 03:36 AM

FYI you need special fittings for the 4l60e and 4l80e trannies when you hook up the tranny cooler, unless you are using O.E style push connect fittings. They go INTO the trans a little bit, and using any other fittings are problematic. If you are running braided lines or need to use aftermarket connectors for some reason, these fittings are a MUST.

Thats the only other thing I can think of that might come up as an issue if the shop didn't have it on the parts list (but this completely depends on your setup)

**truckdude239** · 01-07-2014, 09:03 AM

Quote:

Originally Posted by BR3W CITY

FYI you need special fittings for the 4l60e and 4l80e trannies when you hook up the tranny cooler, unless you are using O.E style push connect fittings. They go INTO the trans a little bit, and using any other fittings are problematic. If you are running braided lines or need to use aftermarket connectors for some reason, these fittings are a MUST.

Thats the only other thing I can think of that might come up as an issue if the shop didn't have it on the parts list (but this completely depends on your setup)

Why is it problematic? I took the factory ones off and used the ones off my th350 that my an lines hooked too no leaks.

solidaxel · 01-07-2014, 10:30 AM

Quote:

Originally Posted by truckdude239

Why is it problematic? I took the factory ones off and used the ones off my th350 that my an lines hooked too no leaks.

Tell us more about the special fittings!

mooseknuckles · 01-07-2014, 10:57 AM

..I used the stock fitting for the power steering. and these for the trany fittings...the one is longer for a reason.

ls1nova71 · 01-07-2014, 11:21 AM

Quote:

Originally Posted by mooseknuckles

..I used the stock fitting for the power steering. and these for the trany fittings...the one is longer for a reason.

I think this is what BR3W CITY was talking about, the longer fitting for a 4l80e. The 4l60e you can use the older flare fittings out of an older transmission.

solidaxel · 01-07-2014, 11:26 AM

Thanks!

BR3W CITY · 01-07-2014, 07:59 PM

YES, sorry if I made that more confusing for you guys. Failure to use the correct fitting on the (80's if you switch) can result in lack of line pressure, and goofy tranny issues. The depth on the fitting is critical, and is often missed because the stock line has this depth built into it.

BUT for the 4l60e, I should add that it gets a bit weird; you CAN use your old fittings, and you CAN use aftermarket fittings BUT....the tranny case is cut to 1/4" NPS, the S standing for STRAIGHT CUT. Many common fittings are cut to NPT, which is the Tapered National Pipe Thread. Technically, using the wrong fitting can leak or work its way out. That being said, people throw loctite on NPT and use them all the time.

I realize I got on the 4l80e mind track again.

Andy4639 · 01-07-2014, 08:56 PM

Trans was no problem had the stock fittings with lines they just adapted over on the radiator side.

solidaxel · 01-08-2014, 10:11 AM

Quote:

Originally Posted by Andy4639

Trans was no problem had the stock fittings with lines they just adapted over on the radiator side.

Did you use a compression fitting, or flair the existing lines to fit the rad.

Andy4639 · 01-08-2014, 04:21 PM

Quote:

Originally Posted by solidaxel

Did you use a compression fitting, or flair the existing lines to fit the rad.

I will have to look at it closer Friday when I'm over there. I think they just used clamps on the radiator side since the fittings where there already.

Billett · 01-09-2014, 11:13 AM

That special fitting only applies to later 4l80s though if I'm not mistaken. At some point the rear fitting changed places on the housing and required the different fitting. My 95 4l80 has no problems with a standard fitting.

And for the record, I question shops all the time. If I didn't do it myself, I question it.

Andy4639 · 02-11-2014, 07:53 PM

Well I got the old Power steering hoses off tonight and will have new ones made up to fit correctly. It will look a lot better when I'm done.

01-05-2014, 08:05 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	LSx power steering and drive shaft ?'s The shop wanted my old fitting off the orignal power steering pump. Is that all they need to swap it out? I got it out and was wondering if they needed anything else. They have new hoses already for it.They wanted a new yoke for the drive shaft also, said the one on it now didn't fit the 4l80e trans. I thought 700 r4's and the 4l80e were the same size. I don't have the yoke but he said he could get one. Just wondering going tomorrow to take them the P/S fitting. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-05-2014, 09:10 PM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: LSx power steering and drive shaft ?'s The shop told you straight, On both counts....Longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-05-2014, 09:39 PM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: LSx power steering and drive shaft ?'s ....Did you pay a shop to do the swap, and the come here second guessing them? wag of the finger __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

01-05-2014, 09:57 PM	#4
-T- Registered User Join Date: Oct 2009 Location: Easley, SC Posts: 130	Re: LSx power steering and drive shaft ?'s 4160's and 700's are the same but the 4l80 are much bigger yoke. I have had some power steering lines screw right into the new power steering pumps and some have to be adapted... so I'm sure Hawks is steering you right. Good luck

01-05-2014, 10:20 PM	#5
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: LSx power steering and drive shaft ?'s I just swaped the fittings and used the stock 71 lines __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-06-2014, 04:46 AM	#6
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: LSx power steering and drive shaft ?'s 4l80e uses the same yoke as a 400 turbo. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-06-2014, 09:22 AM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: LSx power steering and drive shaft ?'s Thanks for the info guy's. No I'm not second guessing just want to make sure thats all I needed before I make the trip over there. Don't want to make the trip and findout I needed something else is all. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-06-2014, 06:37 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: LSx power steering and drive shaft ?'s All is good. Took the fittings and old lines back just incase and they needed the length for the new ones. The yoke on the old shaft was to small + they had to cut it down 1 1/2" to fit so that is done also. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-07-2014, 03:36 AM	#12
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: LSx power steering and drive shaft ?'s FYI you need special fittings for the 4l60e and 4l80e trannies when you hook up the tranny cooler, unless you are using O.E style push connect fittings. They go INTO the trans a little bit, and using any other fittings are problematic. If you are running braided lines or need to use aftermarket connectors for some reason, these fittings are a MUST. Thats the only other thing I can think of that might come up as an issue if the shop didn't have it on the parts list (but this completely depends on your setup) __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

01-07-2014, 10:57 AM	#15
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: LSx power steering and drive shaft ?'s ..I used the stock fitting for the power steering. and these for the trany fittings...the one is longer for a reason. Attached Images __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682 Last edited by mooseknuckles; 01-07-2014 at 11:03 AM.

01-07-2014, 11:26 AM	#17
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LSx power steering and drive shaft ?'s Thanks! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

01-07-2014, 07:59 PM	#18
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: LSx power steering and drive shaft ?'s YES, sorry if I made that more confusing for you guys. Failure to use the correct fitting on the (80's if you switch) can result in lack of line pressure, and goofy tranny issues. The depth on the fitting is critical, and is often missed because the stock line has this depth built into it. BUT for the 4l60e, I should add that it gets a bit weird; you CAN use your old fittings, and you CAN use aftermarket fittings BUT....the tranny case is cut to 1/4" NPS, the S standing for STRAIGHT CUT. Many common fittings are cut to NPT, which is the Tapered National Pipe Thread. Technically, using the wrong fitting can leak or work its way out. That being said, people throw loctite on NPT and use them all the time. I realize I got on the 4l80e mind track again. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

01-07-2014, 08:56 PM	#19
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: LSx power steering and drive shaft ?'s Trans was no problem had the stock fittings with lines they just adapted over on the radiator side. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-09-2014, 11:13 AM	#22
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: LSx power steering and drive shaft ?'s That special fitting only applies to later 4l80s though if I'm not mistaken. At some point the rear fitting changed places on the housing and required the different fitting. My 95 4l80 has no problems with a standard fitting. And for the record, I question shops all the time. If I didn't do it myself, I question it. __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

02-11-2014, 07:53 PM	#23
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: LSx power steering and drive shaft ?'s Well I got the old Power steering hoses off tonight and will have new ones made up to fit correctly. It will look a lot better when I'm done. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.