rubber door seal on cab install help

[62 bigwindow]

Bought new door seals (the seal on the cab that seals the door to cab)
and got the old rubber and glue cleaned off and was curious if there
Was a trick to installing the the new ones and what I should use to glue it on. Was thinking 3m emblem adhesive?

[chevy_mike]

Most use the 3M weatherstip adhesive. I think there are a few other products that work well (one I think is a Ford product) but don't recall the name. Use some rubbing alcohol or wax/grease remover to make sure the surface is free of any oils.

Grab a roll of painters tape (blue stuff) and I like to put some adhesive in the groove and start along the top. Slide it over the flange, use a bunch of tape to hold in place and then work your way around, doing about a foot at a time. This way you don't have a bunch of adhesive in the loose area while you're working around, getting this stuff all over the place. It does help if you have a second set of hands.

Good luck.