Power Steering box question

[60-66]

Working on another chassis and ran into a small problem I cant get answered around here. I just happened to have a new GM Power steering box for trucks that uses the O-ring style fittings. I want to use a stock 1969 Chevy truck power steering hose as it works well for what Im doing. Do they make an adapter to use the compression style fitting hose on an O-ring steering box ? Im told rebuilders now supply these adapters to work on earlier mid seventies trucks. Anyone ever run into this situation ?

[Trsmotrhed]

Look at pure choice motorsports. They have all kinds of adapters for steering fittings. Awesome tech support also.
http://www.purechoicemotorsports.com/

[60-66]

Thank you, will call them today and see if they can help.

[rideblue00]

Look locally for a company that will make brake lines and hydraulic hoses and they maybe able to assemble something from scratch with the custom fittings you need.

[61K10]

60-66---I have an extra set. o-ring to inverted flair--give me a pm. sorry wrong pic. will look for the right one bought them from ccp.

[61K10]

here is the right pic

[60-66]

Originally Posted by 61K10

here is the right pic

Thanks, is the female end that threads into the fitting 3/8 or 1/2 ? The OD of my fitting is .680 on the hose end I need to use which is 1/2 inch pipe thread

[61K10]

o-ring boxes are metric as far as i know. these are two fittings that converts 16mm and 18mm steering box to 11/16-18 and 5/8-18 inverted flair. used them on my 4x4 p/s setup. was going to use these on something else, but went another direction.

[60-66]

OK, I called CPP and the part number I need is 605SOL, if that's what you have Im interested. Judging by what you wrote and the specs he gave me, you have what I need. PM comming