Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-25-2014, 11:17 PM | #1 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
need lift recommendations 1969 blazer
I'd like to lift my blazer 4 inches, has stock springs. just curious what springs would be the simplest. are people using b52 kits on blazers? if the recommendation is to use later chevy stock springs where are people buying new one's and at what weight rating?
Thanks! David |
03-26-2014, 07:21 AM | #2 |
Senior Member
Join Date: Mar 2009
Location: Brigantine NJ
Posts: 822
|
Re: need lift recommendations 1969 blazer
Why not just get a lift kit? I have a tuff country 2 1/2 inch all spring lift and 33's and I really like it!
__________________
Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii |
03-26-2014, 11:19 AM | #3 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: need lift recommendations 1969 blazer
I guess I thought I put that in my post. Yes if there are good lift kits available that is what I'm interested in. Where is the best place to buy rough country from
|
03-26-2014, 02:43 PM | #4 |
Registered User
Join Date: Nov 2012
Location: Freeland, Michigan
Posts: 1,385
|
Re: need lift recommendations 1969 blazer
I put a 4" BDS (Spring only) lift on my 1972 jimmy. I have no rubbing issues running 33" x 13.5" Nitto mudd grapplers. Springs are alittle stiff but that is to be expected.
Eric |
03-26-2014, 04:55 PM | #5 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: need lift recommendations 1969 blazer
did the bds come with shocks, brake lines, etc
|
03-26-2014, 06:08 PM | #6 |
Registered User
Join Date: Nov 2012
Location: Freeland, Michigan
Posts: 1,385
|
Re: need lift recommendations 1969 blazer
Yes it was a complete kit. You can choose if you want blocks in the back or springs (I chose new rear springs due to the fact I did not want alot of axle rap during acceleration) So I went with 4 springs & shocks, steering arm, steering stabilizer shock, front & rear brake brackets, U-bolts. I attached these web address below.
http://bds-suspension.com/kit-customizer?kid=104H Hope this helps you out, Eric |
03-26-2014, 06:23 PM | #7 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: need lift recommendations 1969 blazer
thanks guy
|
03-27-2014, 03:40 AM | #8 |
Freakin Awesome!
Join Date: Jul 2003
Location: San Diego
Posts: 482
|
Re: need lift recommendations 1969 blazer
If you want the best, call Deaver and tell them you want their long travel leaf setup. It can't be beat for the money IMHO.
__________________
1972 K5 Blazer - LQ4/TH350/NP205 - Long Travel Suspension - Hooptee |
03-27-2014, 10:06 AM | #9 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: need lift recommendations 1969 blazer
I don't need the best. Just looking for a nice setup for a driver that is going there last.
|
03-28-2014, 02:28 AM | #10 |
Registered User
Join Date: Mar 2014
Location: Altoona,PA
Posts: 11
|
Re: need lift recommendations 1969 blazer
Just bought my 4 inch lift directly from rough country under 900 for all springs front and rear, 4 shocks, dual steering stabilizer, steering arm and extended brake lines. Tring to build a daily driver on a budget not a hard core 4x4. Hope this helps!
|
03-29-2014, 07:08 PM | #11 |
Freakin Awesome!
Join Date: Jul 2003
Location: San Diego
Posts: 482
|
Re: need lift recommendations 1969 blazer
I hear you. The Deaver setup will basically be about double of what you pay for one of the off the shelf lifts but it will ride like a Cadillac on and off road.
__________________
1972 K5 Blazer - LQ4/TH350/NP205 - Long Travel Suspension - Hooptee |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|