Cam selection and vaccum - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jstrong394 · 09-13-2014, 09:12 AM

Just going to be a mild street truck not track time or a daily driver. Can't decide on a cam. Don't want to go to big and have a huge stall and no vaccum. Was looking at the edelbrock 2216 since I'm going I be carb'd. I was hoping to stay under 3000 stall converter. What are you guys running

BR3W CITY · 09-13-2014, 03:58 PM

The 2215 might fit a bit better for you, as I think the 2216 (while still mild) is going to make its power higher up, and not "feel" as strong in the truck.

09-13-2014, 09:12 AM	#1
jstrong394 Registered User Join Date: May 2011 Location: south mississippi Posts: 177	Cam selection and vaccum Just going to be a mild street truck not track time or a daily driver. Can't decide on a cam. Don't want to go to big and have a huge stall and no vaccum. Was looking at the edelbrock 2216 since I'm going I be carb'd. I was hoping to stay under 3000 stall converter. What are you guys running

09-13-2014, 03:58 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Cam selection and vaccum The 2215 might fit a bit better for you, as I think the 2216 (while still mild) is going to make its power higher up, and not "feel" as strong in the truck. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.