NE 67 C50 Parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

colgad · 09-26-2014, 09:46 AM

Have front fenders? Good bad or ugly.
thanks

**paulspickupparts** · 09-26-2014, 10:16 AM

Well we had them and they were nice . There was a wanted add in on of the forums and I responded and never heard back . So the truck ended up getting crushed as we ran out of room and nothing was selling off of it. Wish I had known as this truck was so clean it never should have ended up going to China. Took off some of the small parts and let it go. Sorry. Thanks for inquiry . Good luck

**paulspickupparts** · 09-26-2014, 10:23 AM

@colgad . If you want send me a pm with your contact information and stating that you are looking for the fenders. I travel in the midwest and might be able to find a pair. The problem is they have a rust problem in the rear and to find a totally rust free pair can be a challenge. Thanks Paul

colgad · 09-26-2014, 10:33 AM

Quote:

Originally Posted by paulspickupparts

Well we had them and they were nice . There was a wanted add in on of the forums and I responded and never heard back . So the truck ended up getting crushed as we ran out of room and nothing was selling off of it. Wish I had known as this truck was so clean it never should have ended up going to China. Took off some of the small parts and let it go. Sorry. Thanks for inquiry . Good luck

Wow that is a bummer, I must have just missed that post. I need them to cover those super singles!!!
I PM'ed you a note
thanks

**paulspickupparts** · 09-26-2014, 11:20 AM

Wow, nice . Now scratching my head on why I parted this truck as I had a longbed lying around. Good job. PM sent

colgad · 09-26-2014, 04:36 PM

Here is the first one I did using the old brakes (never again)

A.Bursell · 09-26-2014, 05:08 PM

Quote:

Originally Posted by paulspickupparts

The sun has slightly faded the top so thus the color you see. Thanks

I still can't tell for sure but I think it might be worth taking a chance. How much would you like for it?

Adam

**paulspickupparts** · 09-26-2014, 07:21 PM

Priority Mail shipping runs about $6 so $6 for the vent .

A.Bursell · 09-26-2014, 07:37 PM

Quote:

Originally Posted by paulspickupparts

Priority Mail shipping runs about $6 so $6 for the vent .

Can't pass that up! Thanks!

I'll send a message to get payment info.

Adam

**jabborabbo** · 09-26-2014, 08:51 PM

Quote:

Originally Posted by paulspickupparts

67shortstepside is sending payment for the wiper and headlight switch.

Any update on the choke knob/cable assembly?

Thanks!

**paulspickupparts** · 09-27-2014, 12:23 AM

I have decided to keep the choke cable . It was really supposed to be a package deal with the light switch and wiper knob switch. Which 67shortwide did not want. So it kind of turned into the wild wild west. Shipping will run about $6 plus the paypal fees. So you offer of $10 gives me $3 . I need one for one of my trucks and do not think I can buy one for $3 so will lay it on the dash until I need. Thanks for your offer.

**paulspickupparts** · 09-27-2014, 12:24 AM

Quote:

Originally Posted by colgad

Here is the first one I did using the old brakes (never again)

Well done

**jabborabbo** · 09-28-2014, 11:03 PM

Quote:

Originally Posted by paulspickupparts

I have decided to keep the choke cable . It was really supposed to be a package deal with the light switch and wiper knob switch. Which 67shortwide did not want. So it kind of turned into the wild wild west. Shipping will run about $6 plus the paypal fees. So you offer of $10 gives me $3 . I need one for one of my trucks and do not think I can buy one for $3 so will lay it on the dash until I need. Thanks for your offer.

Okay then...no problemo!

**paulspickupparts** · 10-09-2014, 03:58 PM

Quote:

Originally Posted by 67shortstepside

i will take the switches but not the choke cable

As of today I have not received payment for the switches. Have you sent payment?

68C20 · 10-09-2014, 04:07 PM

Do you still have the fender emblems?

**paulspickupparts** · 10-09-2014, 04:28 PM

Quote:

Originally Posted by 68C20

Do you still have the fender emblems?

I still have the fender emblems. Thanks

68C20 · 10-09-2014, 04:40 PM

Quote:

Originally Posted by paulspickupparts

I still have the fender emblems. Thanks

I will take them. Please PM me your Paypal and I will get you paid. Thanks.

**paulspickupparts** · 10-10-2014, 02:01 PM

Russ , can you pm with the address you want the emblem shipped to .

Thanks Paul

**paulspickupparts** · 10-10-2014, 02:07 PM

I have not received payment from 67shortsetside and cannot get him to respond so the wiper and light switch are still available.

**michael bustamante** · 10-11-2014, 10:16 AM

Is the choke still avail. For 10 shipped? If so pm me pp imfo please

**paulspickupparts** · 10-11-2014, 10:46 AM

I had another offer on the choke cable . I ship USPS Priority which will cost about $6 plus paypal fees . Between $3 to $4 for the cable. So the cable ended up going to ebay for much more. It sold in the first day . I would rather sell here. Sorry , but I can no longer do $3 dollar parts. I do not have enough time. Thanks Paul

09-26-2014, 09:46 AM	#26
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: 67 C50 Parts Have front fenders? Good bad or ugly. thanks __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

09-26-2014, 10:16 AM	#27
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts Well we had them and they were nice . There was a wanted add in on of the forums and I responded and never heard back . So the truck ended up getting crushed as we ran out of room and nothing was selling off of it. Wish I had known as this truck was so clean it never should have ended up going to China. Took off some of the small parts and let it go. Sorry. Thanks for inquiry . Good luck

09-26-2014, 10:23 AM	#28
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts @colgad . If you want send me a pm with your contact information and stating that you are looking for the fenders. I travel in the midwest and might be able to find a pair. The problem is they have a rust problem in the rear and to find a totally rust free pair can be a challenge. Thanks Paul

09-26-2014, 11:20 AM	#30
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts Wow, nice . Now scratching my head on why I parted this truck as I had a longbed lying around. Good job. PM sent

09-26-2014, 04:36 PM	#31
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: 67 C50 Parts Here is the first one I did using the old brakes (never again) Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

09-26-2014, 07:21 PM	#33
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts Priority Mail shipping runs about $6 so $6 for the vent .

09-27-2014, 12:23 AM	#36
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts I have decided to keep the choke cable . It was really supposed to be a package deal with the light switch and wiper knob switch. Which 67shortwide did not want. So it kind of turned into the wild wild west. Shipping will run about $6 plus the paypal fees. So you offer of $10 gives me $3 . I need one for one of my trucks and do not think I can buy one for $3 so will lay it on the dash until I need. Thanks for your offer.

10-09-2014, 04:07 PM	#40
68C20 Registered User Join Date: May 2009 Location: Helena, AL Posts: 86	Re: 67 C50 Parts Do you still have the fender emblems? __________________ Russ 68 C20 long bed Stepside Daily Driver 64 Oldsmobile Dynamic 88

10-10-2014, 02:01 PM	#43
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts Russ , can you pm with the address you want the emblem shipped to . Thanks Paul

10-10-2014, 02:07 PM	#44
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts I have not received payment from 67shortsetside and cannot get him to respond so the wiper and light switch are still available.

10-11-2014, 10:16 AM	#45
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,863	Re: 67 C50 Parts Is the choke still avail. For 10 shipped? If so pm me pp imfo please __________________ 1967custom

10-11-2014, 10:46 AM	#46
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 67 C50 Parts I had another offer on the choke cable . I ship USPS Priority which will cost about $6 plus paypal fees . Between $3 to $4 for the cable. So the cable ended up going to ebay for much more. It sold in the first day . I would rather sell here. Sorry , but I can no longer do $3 dollar parts. I do not have enough time. Thanks Paul

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.