NV WTB- Factory spring hangers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC Guy · 11-09-2014, 03:44 PM

looking to convert from a hanger/shackle drop, to an axle flip. Need stock spring hangers. I'd even trade the Belltech lowering hangers straight up, you pay shipping both ways.
(Drop hangers are still on my truck, awaiting axle flip to remove)

**396ci** · 11-09-2014, 04:25 PM

are you looking for these? does $28 shipped work for you?

GMC Guy · 11-09-2014, 04:31 PM

thanks for the reply, however those are stock shackles, I'm looking for the front hangers that bolt to the frame

PAPABEAR · 11-09-2014, 08:26 PM

I might have what you need can you take a pic of the bell tech hangers?

Sabaka454 · 11-09-2014, 08:38 PM

I have a set off of a 74 GMC C1500

**396ci** · 11-09-2014, 08:50 PM

so you need these... they made a couple of different ones for the 1/2 and 3/4 ton frames. how far off the frame does the spring sit?

GMC Guy · 11-09-2014, 10:36 PM

here's a link to the hangers, they came with the 2" drop shackles as well, but i think I'll hang onto those.
http://www.summitracing.com/nv/parts/bel-6800

I just need the front hangers, annnd...maybe the stock shackles too

GMC Guy · 11-15-2014, 03:02 PM

Bump

GMC Guy · 12-02-2014, 02:53 PM

Bump.
Just need the stock spring hangers to install the flip kit. I'm keeping the shackles in case i decide it needs to be another 1-2 inches lower.
I'd really rather not spend close to a $100 on new hangers from LMC...

aggie91 · 12-03-2014, 06:20 PM

I have a set somewhere in my storage. I can look this weekend for them. I will let you know once I have put my hands on them. They where blasted and coated with KBS chassis saver paint.

GMC Guy · 12-03-2014, 06:57 PM

Quote:

Originally Posted by aggie91

I have a set somewhere in my storage. I can look this weekend for them. I will let you know once I have put my hands on them. They where blasted and coated with KBS chassis saver paint.

PM sent

**Dads79GMC** · 12-03-2014, 08:13 PM

So you don't need the ones shown in Post #6??

MalibuSSwagon · 12-03-2014, 08:41 PM

I have a stock set, very clean from my C10. Just have to retrieve them from the scrap pile at my parent's house.

11-09-2014, 03:44 PM	#1
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	WTB- Factory spring hangers looking to convert from a hanger/shackle drop, to an axle flip. Need stock spring hangers. I'd even trade the Belltech lowering hangers straight up, you pay shipping both ways. (Drop hangers are still on my truck, awaiting axle flip to remove) __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)] Last edited by GMC Guy; 11-09-2014 at 10:38 PM.

11-09-2014, 04:25 PM	#2
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 806	Re: WTB- Factory spring hangers are you looking for these? does $28 shipped work for you? Attached Images __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

11-09-2014, 04:31 PM	#3
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: WTB- Factory spring hangers thanks for the reply, however those are stock shackles, I'm looking for the front hangers that bolt to the frame __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)]

11-09-2014, 08:26 PM	#4
PAPABEAR Registered User Join Date: Dec 2012 Location: la puente so cal Posts: 51	Re: WTB- Factory spring hangers I might have what you need can you take a pic of the bell tech hangers?

11-09-2014, 08:38 PM	#5
Sabaka454 Registered User Join Date: Jul 2005 Location: CT Posts: 278	Re: WTB- Factory spring hangers I have a set off of a 74 GMC C1500

11-09-2014, 08:50 PM	#6
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 806	Re: WTB- Factory spring hangers so you need these... they made a couple of different ones for the 1/2 and 3/4 ton frames. how far off the frame does the spring sit? Attached Images __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

11-09-2014, 10:36 PM	#7
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: WTB- Factory spring hangers here's a link to the hangers, they came with the 2" drop shackles as well, but i think I'll hang onto those. http://www.summitracing.com/nv/parts/bel-6800 I just need the front hangers, annnd...maybe the stock shackles too Attached Images __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)]

11-15-2014, 03:02 PM	#8
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: WTB- Factory spring hangers Bump __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)]

12-02-2014, 02:53 PM	#9
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: WTB- Factory spring hangers Bump. Just need the stock spring hangers to install the flip kit. I'm keeping the shackles in case i decide it needs to be another 1-2 inches lower. I'd really rather not spend close to a $100 on new hangers from LMC... __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)]

12-03-2014, 06:20 PM	#10
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: WTB- Factory spring hangers I have a set somewhere in my storage. I can look this weekend for them. I will let you know once I have put my hands on them. They where blasted and coated with KBS chassis saver paint. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-03-2014, 08:13 PM	#12
Dads79GMC Senior Member Join Date: Feb 2008 Location: Des Moines, Iowa Posts: 1,238	Re: WTB- Factory spring hangers So you don't need the ones shown in Post #6?? __________________ Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016

12-03-2014, 08:41 PM	#13
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: WTB- Factory spring hangers I have a stock set, very clean from my C10. Just have to retrieve them from the scrap pile at my parent's house. __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.