Checking interest in a bolt in DBW Pedal bracket

[Daaaanz67]

That looks good I have an 06 pedal but its plastic. It came out of a tahoe. This should work for my style?

[Hart_Rod]

Originally Posted by jessemthompson

I have to check my pedal while on home on leave next month. If it works, I am definitely in for one.

Ok. LMK.

Originally Posted by Houston Ben

Looks good Rob, I hope you get one for the Squarebody!

Originally Posted by Daaaanz67

That looks good I have an 06 pedal but its plastic. It came out of a tahoe. This should work for my style?

I think so. Can you post a picture of your pedal?

[KEWLKATDADY]

Just to verify that this is going to work for my application.

I'm putting a 6.0l into my '67 c10. The motor and DBW truck pedal I'm using is from a 2004 2500HD.

[Hart_Rod]

Originally Posted by KEWLKATDADY

Just to verify that this is going to work for my application.

I'm putting a 6.0l into my '67 c10. The motor and DBW truck pedal I'm using is from a 2004 2500HD.

It should. Please post a picture of your pedal so I can verify it's the same as the pedal I used to mock this up.

[kitsbeach]

Rob which do you like the look of better the corvette or the truck pedal? Is the corvette one more similar to our stock 67-72 look.?

I'm interested but probably a year away.

[68GMCCustom]

I have a different style pedal....the all plastic (truck?) one. Since my setup is also genIV, will this work with the pedal I have or would I need something different?

[Hart_Rod]

Originally Posted by kitsbeach

Rob which do you like the look of better the corvette or the truck pedal? Is the corvette one more similar to our stock 67-72 look.?

I'm interested but probably a year away.

You can use the stock 71-72 pedal pad on either DBW pedal. I like the way Corvette pedal mounts better. Unfortunately you can only use the Corvette pedal with Gen IV motors.

Originally Posted by 68GMCCustom

I have a different style pedal....the all plastic (truck?) one. Since my setup is also genIV, will this work with the pedal I have or would I need something different?

If your motor is a Gen IV, you can swap to the 05+ corvette pedal and use my other bracket. You just have to swap 2 wires on the pedal plug. Please post pictures of your pedal and the pedal plug.

[Daaaanz67]

This is my pedal I used the bracket that came with it all I had to do was bend the bottom portion of the bracket to match the angle of the floor and used some spacers behind the bracket and the fire wall. The pedal is a little high but is lower than the brake pedal. It functions very well. Still interested in your bracket.

[Hart_Rod]

Originally Posted by Daaaanz67

This is my pedal I used the bracket that came with it all I had to do was bend the bottom portion of the bracket to match the angle of the floor and used some spacers behind the bracket and the fire wall. The pedal is a little high but is lower than the brake pedal. It functions very well. Still interested in your bracket.

I'm pretty sure you can switch to the 05+ corvette pedal and use the pedal bracket that I have in my gold 68. You'll just have to swap 2 wires. Do you have a separate TAC module?

Look at this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=631165

[Daaaanz67]

Yes it's separate from the main ecu.

[Daaaanz67]

Gen III motor out of 06 tahoe

[Hart_Rod]

Originally Posted by Daaaanz67

Gen III motor out of 06 tahoe

Interesting. The plug looks like the flat plug for the gen IVs. Could u post a couple more pics of just the plug?

[Daaaanz67]

Which end plug did you want to see. I actually have the vin that came out of the ecu identifying the vehicle it came out of. Bought everything as a package deal from a private sale. Didn't have to piece anything together. I did have to buy a tac. Module but used the vin and worked perfect.

[Hart_Rod]

Originally Posted by Daaaanz67

Which end plug did you want to see. I actually have the vin that came out of the ecu identifying the vehicle it came out of. Bought everything as a package deal from a private sale. Didn't have to piece anything together. I did have to buy a tac. Module but used the vin and worked perfect.

The end and the side, just curious. Since its a Gen III, you won't be able to switch to the corvette pedal. I'm sure my bracket would work, but I would leave the pedal mounting holes blank so you can position it as you see fit. LMK.

[Hart_Rod]

OK guys. I ordered 10 of these from my machine shop. Price is $60 shipped. Let me know if you want one and I'll add you to the list at the top of the page.

[Hart_Rod]

Started a for sale thread over here:

http://67-72chevytrucks.com/vboard/s...d.php?t=651123

[Hart_Rod]

5 brackets left.

[Hart_Rod]

bump

[Willie Makeit]

had the chance to see one of your brackets installed last night. Great fab work and even greater engineering. Looks and works AWESOME!

Two thumbs up!

[Hart_Rod]

Originally Posted by Willie Makeit

had the chance to see one of your brackets installed last night. Great fab work and even greater engineering. Looks and works AWESOME!

Two thumbs up!

Glad you like it! Please post pictures if you have any.

[zacthrasher]

Are the 04 and down corvette pedals similar to the 05 and up pedals? I have a gen 3 motor for my 67 and was wondering if you ever test fit the older corvette pedals.

Thanks in advance!

[Hart_Rod]

Originally Posted by zacthrasher

Are the 04 and down corvette pedals similar to the 05 and up pedals? I have a gen 3 motor for my 67 and was wondering if you ever test fit the older corvette pedals.

Thanks in advance!

Can you post a picture of the pedal? What motor do you have?

[Houston Ben]

Any progress on the squarebody one?

[Hart_Rod]

Originally Posted by Houston Ben

Any progress on the squarebody one?

Not yet. I thought there would be more demand for the 67-72 one. Not sure how much demand there will be for the squarebody. Might not be worth making them.

[jessemthompson]

Here is the pic of my pedal. Idk if your bracket with work for it.