94 frame under a 63 gmc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevycowboy1985 · 12-03-2014, 12:11 PM

Well got lots of work done the past week . Did lots of research about this and everyone said don't but I had too. After finding the donor truck with new tranny and new clutch and motor that only has 10000 kms on it the battle began . It was not as tough as most would think worked out really good to Me.

Ronzo · 12-03-2014, 12:38 PM

Looks good, might have to pop over and take a look.

Ronzo · 12-03-2014, 02:17 PM

Did you shorten the box too?
And, is that the cab I saw in your garage this summer?
I still need to grab those bezels for my stepside.

chevycowboy1985 · 12-03-2014, 02:22 PM

Ya that's the cab and yes I shorting the box but it's in real bad shape and found a couple different set I found

Ronzo · 12-03-2014, 02:26 PM

The stepside box will look good on there.

lowlife4life · 12-03-2014, 09:08 PM

Looks good man glad it worked out for you!!!!

chevycowboy1985 · 12-03-2014, 09:51 PM

Quote:

Originally Posted by lowlife4life

Looks good man glad it worked out for you!!!!

Ya worked out better then I thought it would just working on body mounts now

Jeff La · 12-04-2014, 09:54 AM

Looks good. So what all did you have to do to make it work? I have been thinking about doing the same.

chevycowboy1985 · 12-04-2014, 12:46 PM

Quote:

Originally Posted by Jeff La

Looks good. So what all did you have to do to make it work? I have been thinking about doing the same.

Well the cab fit well plan on moving the front mounts back and shorting then by 1 1/4". The rear hole end up right over top of the frame ,have some work to do there. Rad support is about 4" off the frMe going to make custom mounts or use part of the 94 rad support to mine so I can use stock location. It's not as hard or bad as I thought it would have been. Going to post more pictures and info as I get more done this weekend

Lokin4AReason · 12-04-2014, 01:28 PM

did any of the hole(s) line up or what kind of modification(s) needed to be on to settle the component(s) on that late model frame .... ???

Jeff La · 12-05-2014, 10:23 AM

Quote:

Originally Posted by chevycowboy1985

Well the cab fit well plan on moving the front mounts back and shorting then by 1 1/4". The rear hole end up right over top of the frame ,have some work to do there. Rad support is about 4" off the frMe going to make custom mounts or use part of the 94 rad support to mine so I can use stock location. It's not as hard or bad as I thought it would have been. Going to post more pictures and info as I get more done this weekend

I had thought about using the 94 mounts on the cab. Just cut the section of the 94 cab out where it's bolted in and weld to the floor of the 65 cab, that way I have the new bushings and can unbolt the cab from underneath. That would be simple even if you have to move the mounts themselves.

**Palf70Step** · 12-05-2014, 01:49 PM

Very Interesting. Can't wait to hear more on this!

Ronzo · 12-08-2014, 05:00 PM

Can you lower that frame and suspension easily?
Make any progress on the weekend?

chevycowboy1985 · 12-08-2014, 11:51 PM

Ya can get stuff way easier and got the cab mounts all finished up will get some pictures up tomorrow

Ronzo · 12-16-2014, 07:58 PM

Pics?

chevycowboy1985 · 12-23-2014, 07:28 PM

got some pitures front mounts are off the new frame just cut down and moved back. rear mounts are off the 63 frame just cut down to match angle and welded on top of the frame. im working on the rad mounts right now igoing to use the rad support off the 94 and cut it down to mount the 63 to it.

LostMy65 · 08-18-2017, 12:56 AM

Any updates?

**PGSigns** · 08-18-2017, 08:34 PM

He last logged in more than 2 years ago. Be nice to know if it ever got finished.
Jimmy

LostMy65 · 08-30-2018, 12:00 AM

4 years later bump.
Sure wish you'd post how it all came together.

12-03-2014, 12:11 PM	#1
chevycowboy1985 Registered User Join Date: Jan 2014 Location: lethbridge alberta Posts: 48	94 frame under a 63 gmc Well got lots of work done the past week . Did lots of research about this and everyone said don't but I had too. After finding the donor truck with new tranny and new clutch and motor that only has 10000 kms on it the battle began . It was not as tough as most would think worked out really good to Me. Attached Images Last edited by chevycowboy1985; 12-03-2014 at 12:20 PM. Reason: add pictures

12-03-2014, 12:38 PM	#2
Ronzo Registered User Join Date: Jul 2014 Location: Ft Whoopup, Ab Posts: 317	Re: 94 frame under a 63 gmc Looks good, might have to pop over and take a look.

12-03-2014, 02:17 PM	#3
Ronzo Registered User Join Date: Jul 2014 Location: Ft Whoopup, Ab Posts: 317	Re: 94 frame under a 63 gmc Did you shorten the box too? And, is that the cab I saw in your garage this summer? I still need to grab those bezels for my stepside.

12-03-2014, 02:22 PM	#4
chevycowboy1985 Registered User Join Date: Jan 2014 Location: lethbridge alberta Posts: 48	Re: 94 frame under a 63 gmc Ya that's the cab and yes I shorting the box but it's in real bad shape and found a couple different set I found

12-03-2014, 02:26 PM	#5
Ronzo Registered User Join Date: Jul 2014 Location: Ft Whoopup, Ab Posts: 317	Re: 94 frame under a 63 gmc The stepside box will look good on there.

12-03-2014, 09:08 PM	#6
lowlife4life Registered User Join Date: Jul 2013 Location: grande prairie alberta Posts: 324	Re: 94 frame under a 63 gmc Looks good man glad it worked out for you!!!!

12-04-2014, 09:54 AM	#8
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: 94 frame under a 63 gmc Looks good. So what all did you have to do to make it work? I have been thinking about doing the same.

12-04-2014, 01:28 PM	#10
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 974	Re: 94 frame under a 63 gmc did any of the hole(s) line up or what kind of modification(s) needed to be on to settle the component(s) on that late model frame .... ??? __________________ dont want to hear excuses, i want to hear solution(s)

12-05-2014, 01:49 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,226	Re: 94 frame under a 63 gmc Very Interesting. Can't wait to hear more on this! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-08-2014, 05:00 PM	#13
Ronzo Registered User Join Date: Jul 2014 Location: Ft Whoopup, Ab Posts: 317	Re: 94 frame under a 63 gmc Can you lower that frame and suspension easily? Make any progress on the weekend?

12-08-2014, 11:51 PM	#14
chevycowboy1985 Registered User Join Date: Jan 2014 Location: lethbridge alberta Posts: 48	Re: 94 frame under a 63 gmc Ya can get stuff way easier and got the cab mounts all finished up will get some pictures up tomorrow

12-16-2014, 07:58 PM	#15
Ronzo Registered User Join Date: Jul 2014 Location: Ft Whoopup, Ab Posts: 317	Re: 94 frame under a 63 gmc Pics?

12-23-2014, 07:28 PM	#16
chevycowboy1985 Registered User Join Date: Jan 2014 Location: lethbridge alberta Posts: 48	Re: 94 frame under a 63 gmc got some pitures front mounts are off the new frame just cut down and moved back. rear mounts are off the 63 frame just cut down to match angle and welded on top of the frame. im working on the rad mounts right now igoing to use the rad support off the 94 and cut it down to mount the 63 to it. Attached Images

08-18-2017, 12:56 AM	#17
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 94 frame under a 63 gmc Any updates? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-18-2017, 08:34 PM	#18
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: 94 frame under a 63 gmc He last logged in more than 2 years ago. Be nice to know if it ever got finished. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

08-30-2018, 12:00 AM	#19
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 94 frame under a 63 gmc 4 years later bump. Sure wish you'd post how it all came together. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.