What did you do to your truck today part III - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64chevtruck · 01-08-2015, 08:53 PM

Quote:

Originally Posted by 19515windowsolow

@Grizz1963

I really wish you would stop thread jacking with your pointless pictures and shyt. RE-DICK!

.................................................................................

Mammy always used to tell me.........if you don't have anything nice to say. ...don't say anything at all.

I guess yours dropped the ball.

Jeff La · 01-08-2015, 09:04 PM

Quote:

Originally Posted by Grizz1963

Thanks a lot buddy. Happy to pay my way though.

Always happy to pay the post via Paypal.

While we are back to our regular transmission........

As requested by Ta2Don.

I hope it is helpful to some who need a new glovebox.

I have drawn up the outline of a self build/fold glovebox (cubby hole) that can be folded from 0.8mm sheet metal or ally, then riveted or tack welded to keep together. I made one as a trade for some side view mirrors last year.

I trust you guys can understand the measurements and destructions.

If you have various types of air on, fresh air pipes behind the dash, you may need to edit or nip the rear corner to make everything fit.

Shout if you need more info.

What's this mm thats after all the numbers

Ta2Don · 01-08-2015, 09:24 PM

Quote:

Originally Posted by earl84

I really wish you would just ease on past Grizz's posts instead being a DICK. Not once, but twice. Hope you have taken the not today subtle hints and don't post crap like that again. This is THE best, most civil forum on the Internet, and there's no room m for stuff like that, period.

Hear, Hear, AMEN and anything else I can say to be in agreement…

I've been to a couple of forums where the people out there are less than sociable, not my culpa tea!!!

**Micmac** · 01-08-2015, 09:32 PM

I've only run into one jerk on here since 2007, and he also was an FNG. This is a place where you should be able to post anything about or 60-66 Chevy trucks, or things related to them w/o fear of reprisal. Rian is a CONTRIBUTOR here.

powerdriver 1958 · 01-08-2015, 10:15 PM

19515windowsolow ,

14 posts and you are ready to rule this forum ... Take your foot out of your mouth and step back , Learn what this forum is about or log out before your are banned

Quote:

III. No pissing matches. Its fine to disagree, but once a thread has run its course, and degenerated into little more than an insult fest, it will be locked. While this will require a judgment call by the Administrators & Moderators. The members of this site can keep our moderating to a minimum by exercising a little discretion and self- control. Excessive profanity will lead to a 24 hour suspension at the Administrations discretion.

Quote:

IV. Pure trolling, either to upset someone or simply for your personal
enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

LVPhotos · 01-08-2015, 10:17 PM

Heading to pickup bag mounts. A before shot and one of first piece in.

schpeen · 01-08-2015, 10:31 PM

Tinted the windows and added the passenger side door mirror.

Lugnutz65 · 01-08-2015, 10:34 PM

Quote:

Originally Posted by schpeen

Tinted the windows and added the passenger side door mirror.

Nice truck! How much is it lowered? Tire and wheel size?

pimpston65 · 01-08-2015, 10:55 PM

Quote:

Originally Posted by schpeen

Tinted the windows and added the passenger side door mirror.

how did you get them WW's white cuz i have a set, and they are kinda yellow maybe from storage cuz they never been mounted...

**Micmac** · 01-08-2015, 11:32 PM

I use Wesley's Bleach White on my Chiefs Gangsta WWW's. Orange hand cleaner and a scrub brush works as well.

schpeen · 01-09-2015, 04:28 AM

Quote:

Originally Posted by pimpston65

how did you get them WW's white cuz i have a set, and they are kinda yellow maybe from storage cuz they never been mounted...

X2 on the Wesleye

schpeen · 01-09-2015, 04:33 AM

Quote:

Originally Posted by Lugnutz65

Nice truck! How much is it lowered? Tire and wheel size?

P225/70/15
P255/70/15 rears

**jayoldschool** · 01-09-2015, 11:45 AM

x3

Grizz1963 · 01-09-2015, 12:02 PM

Quote:

Originally Posted by jayoldschool

x3

You serious?

Before and after on the white walls?

If so..... WoW!!

I need some of that as my whites are grey.

pimpston65 · 01-09-2015, 12:20 PM

Awesome, I got my WW's from US ROYAL Coker tire. 3" WW

blown240 · 01-09-2015, 01:36 PM

I found my exhaust leak!

65 C20 · 01-09-2015, 01:42 PM

Quote:

Originally Posted by Jeff La

What's this mm thats after all the numbers

That is for millimeters.
It's a metric measurement.

Grizz1963 · 01-09-2015, 01:53 PM

Quote:

Originally Posted by 65 C20

That is for millimeters.
It's a metric measurement.

I think he was testing me......

I grew up in Metric in South Africa, but here in the UK it is mostly Inches and Feet and Miles etc, but they use litres too..... So a mixed mess.

I am sure most people can convert though if they needed to.

OldGMJon · 01-09-2015, 03:59 PM

Hey Grizz, I had no idea there was such a strong Chevy truck following in England/Europe. Your work is top notch and creatively so. I enjoy reading your threads and what you encounter because it is much like what I encounter as I work on mine. You however, solve them like a pro while I stumble and hit the forums to see what can be done. I have too many projects so my time spent on anyone of them is limited. Wish you were just around the corner as I have little help with mine. jon
projects:
66' GMC C30 flat-bed
65' GMC C10 long fleeter
65' Chevy C10 Panel truck
65' Chevy C10 SWB (just chassis)
Was media blasted, powder coated, and drivetrain completely rebuilt like new and all stock(6lug) Now looking for a 65' cab and bed, fleet of step side (short)
64' Chevy C30 long flatbed (12')
I am thinking about putting the 64's cab on the 65' GMC fleeter since it's cab is a complete rust bucket then make the chassis into a duel-wheel trailer.

pimpston65 · 01-09-2015, 04:29 PM

Quote:

Originally Posted by Grizz1963

I think he was testing me......

I grew up in Metric in South Africa, but here in the UK it is mostly Inches and Feet and Miles etc, but they use litres too..... So a mixed mess.

I am sure most people can convert though if they needed to.

ima send it out today Grizz...

pimpston65 · 01-09-2015, 04:34 PM

Quote:

Originally Posted by pimpston65

Awesome, I got my WW's from US ROYAL Coker tire. 3" WW

ima clean them today

Grizz1963 · 01-09-2015, 04:50 PM

Quote:

Originally Posted by pimpston65

ima send it out today Grizz...

That's really cool mate.

Thank you.

**jayoldschool** · 01-09-2015, 07:19 PM

Quote:

Originally Posted by blown240

I found my exhaust leak!

Replace with coppers or Percy's and you'll be good.

**jayoldschool** · 01-09-2015, 07:29 PM

Quote:

Originally Posted by Grizz1963

You serious?

Before and after on the white walls?

If so..... WoW!!

I need some of that as my whites are grey.

Serious. It's that good. Those were used tires from a Cadillac, mounted WW in, they had never been cleaned. Shot Bleche Wite on them, sprayed off. NO scrubbing. That's what makes WWs dirty, when they get little scratches from abrasives. Spray on, spray off. Never use stuff like SOS pads on WWs.

My Caddy:

Jeff La · 01-10-2015, 12:21 AM

Quote:

Originally Posted by Grizz1963

I think he was testing me......

I grew up in Metric in South Africa, but here in the UK it is mostly Inches and Feet and Miles etc, but they use litres too..... So a mixed mess.

I am sure most people can convert though if they needed to.

I knew what the mm stood for and I thought England used inch measurements so that's why I was messing with him. We good and thanks

01-08-2015, 09:32 PM	#379
Micmac Senior Member Join Date: Nov 2007 Location: Calais, Maine Posts: 513	Re: What did you do to your truck today part III I've only run into one jerk on here since 2007, and he also was an FNG. This is a place where you should be able to post anything about or 60-66 Chevy trucks, or things related to them w/o fear of reprisal. Rian is a CONTRIBUTOR here. __________________ 1963 Chevrolet C-10 "Ginger" 1970 C-30 Dump Truck "Scarlet" 2019 Chevy Silverado 2500 Z71 LTZ 1947 Indian Chief Roadmaster with Sidecar. 2012 Indian Chief Serial #002 of 110 built in '12 2016 Indian Chief Roadmaster

01-08-2015, 10:17 PM	#381
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: What did you do to your truck today part III Heading to pickup bag mounts. A before shot and one of first piece in. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-08-2015, 10:31 PM	#382
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part III Tinted the windows and added the passenger side door mirror. Attached Images

01-08-2015, 11:32 PM	#385
Micmac Senior Member Join Date: Nov 2007 Location: Calais, Maine Posts: 513	Re: What did you do to your truck today part III I use Wesley's Bleach White on my Chiefs Gangsta WWW's. Orange hand cleaner and a scrub brush works as well. __________________ 1963 Chevrolet C-10 "Ginger" 1970 C-30 Dump Truck "Scarlet" 2019 Chevy Silverado 2500 Z71 LTZ 1947 Indian Chief Roadmaster with Sidecar. 2012 Indian Chief Serial #002 of 110 built in '12 2016 Indian Chief Roadmaster

01-09-2015, 11:45 AM	#388
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,176	Re: What did you do to your truck today part III x3

01-09-2015, 12:20 PM	#390
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: What did you do to your truck today part III Awesome, I got my WW's from US ROYAL Coker tire. 3" WW

01-09-2015, 01:36 PM	#391
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: What did you do to your truck today part III I found my exhaust leak! __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

01-09-2015, 03:59 PM	#394
OldGMJon Registered User Join Date: Oct 2014 Location: Albion, Ca. Posts: 414	Re: What did you do to your truck today part III Hey Grizz, I had no idea there was such a strong Chevy truck following in England/Europe. Your work is top notch and creatively so. I enjoy reading your threads and what you encounter because it is much like what I encounter as I work on mine. You however, solve them like a pro while I stumble and hit the forums to see what can be done. I have too many projects so my time spent on anyone of them is limited. Wish you were just around the corner as I have little help with mine. jon projects: 66' GMC C30 flat-bed 65' GMC C10 long fleeter 65' Chevy C10 Panel truck 65' Chevy C10 SWB (just chassis) Was media blasted, powder coated, and drivetrain completely rebuilt like new and all stock(6lug) Now looking for a 65' cab and bed, fleet of step side (short) 64' Chevy C30 long flatbed (12') I am thinking about putting the 64's cab on the 65' GMC fleeter since it's cab is a complete rust bucket then make the chassis into a duel-wheel trailer.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.