C10 vs C20 ball joints, control arm mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slotard · 01-11-2015, 04:48 PM

The previous owner of my truck just found some parts around that he gave me. Looking at the receipts, I think they may have been for the C10 he had previously (also square body, 77 maybe?). Two sets of ball joints (only one set shown in pics), a PS hose, and a control arm shaft.

Can I use any of these on the C20, or should I sell them?

beamn7 · 01-15-2015, 10:02 PM

The only thing you might be able to use is the p/s hose. Maybe... The bushings, ball joints and shaft are different on C10 vs. C20/C30

01-11-2015, 04:48 PM	#1
slotard Registered User Join Date: Nov 2014 Location: Alameda, CA Posts: 877	C10 vs C20 ball joints, control arm mount The previous owner of my truck just found some parts around that he gave me. Looking at the receipts, I think they may have been for the C10 he had previously (also square body, 77 maybe?). Two sets of ball joints (only one set shown in pics), a PS hose, and a control arm shaft. Can I use any of these on the C20, or should I sell them? __________________ 1973 C20, 350/350

01-15-2015, 10:02 PM	#2
beamn7 Registered User Join Date: Oct 2011 Location: Wildomar, CA Posts: 466	Re: C10 vs C20 ball joints, control arm mount The only thing you might be able to use is the p/s hose. Maybe... The bushings, ball joints and shaft are different on C10 vs. C20/C30

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.