64 C10 headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jazbojinx · 01-14-2015, 09:04 PM

Has anyone used a set of 88-95 truck headers on a 64-66 c10? Found some nice stainless mid length and was wondering if anyone has used a set from these years?
Thanks

shortbed70 · 01-14-2015, 10:32 PM

I used 1974 camaro long tubes on mine but I've heard those headers work but the tend to shoot for the pass side frame rail.

Jazbojinx · 01-14-2015, 10:49 PM

Thanks Shortbed70. By the way love your build. I'm doing mine right now. Getting ready to pull the cab to do the exhaust and finish boxing the frame then the frame is off to powder coating. Then the rust repair and body work starts.

**Captainfab** · 01-15-2015, 02:21 AM

From what I have heard/read, those headers don't work.

shortbed70 · 01-15-2015, 09:03 PM

They worked on mine. Some minor frame trimming on the pass side and remove a grease zert on drivers side control arm. My motor is set between the two mounting points these trucks have. Mine were summit brand ceramic... I'll try and get some pics... Thanks Jaz

shortbed70 · 01-16-2015, 12:31 AM

Here's a pic with the first set of summit small tube headers for a 74 camaro.. You can see where I had to do some minor trimming second tube back

shortbed70 · 01-16-2015, 12:34 AM

Here's the new motor and bigger tube ceramic headers. These were off eBay for $215 so don't know brand just know they were for the same car... Notice in the first pic where the motor mounts are also! If I would've went to the furthest forward they wouldn't work. At the back mounts the hei cap hits the firewall. So I split the difference

Jazbojinx · 01-16-2015, 12:59 AM

Thanks Troy. I moved my engine 2" forward when I installed the 81 crossmember. Wanted the distributor away from the firewall. I'm going to order the 88-95 and if I have to I will cut them apart and tig them back up. Did you fill the bed side seams also? I'm going to fill all the body seams also.
Thanks for all the feed back.

Bare64 · 01-16-2015, 11:00 PM

Does any manufacturer make a header for a 350 that is bolt in? Shorty type?

Jazbojinx · 01-16-2015, 11:35 PM

Sanderson makes a shorty.
http://m.summitracing.com/parts/snh-cc3-p

shortbed70 · 01-17-2015, 09:53 AM

Quote:

Originally Posted by Jazbojinx

Thanks Troy. I moved my engine 2" forward when I installed the 81 crossmember. Wanted the distributor away from the firewall. I'm going to order the 88-95 and if I have to I will cut them apart and tig them back up. Did you fill the bed side seams also? I'm going to fill all the body seams also.
Thanks for all the feed back.

No problem and yes I welded the seams all around the bed! My truck doesn't haul anything but what I need at shows..

01-14-2015, 09:04 PM	#1
Jazbojinx Registered User Join Date: Feb 2013 Location: Denair, CA Posts: 36	64 C10 headers Has anyone used a set of 88-95 truck headers on a 64-66 c10? Found some nice stainless mid length and was wondering if anyone has used a set from these years? Thanks

01-14-2015, 10:32 PM	#2
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 64 C10 headers I used 1974 camaro long tubes on mine but I've heard those headers work but the tend to shoot for the pass side frame rail. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-14-2015, 10:49 PM	#3
Jazbojinx Registered User Join Date: Feb 2013 Location: Denair, CA Posts: 36	Re: 64 C10 headers Thanks Shortbed70. By the way love your build. I'm doing mine right now. Getting ready to pull the cab to do the exhaust and finish boxing the frame then the frame is off to powder coating. Then the rust repair and body work starts.

01-15-2015, 02:21 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 64 C10 headers From what I have heard/read, those headers don't work. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-15-2015, 09:03 PM	#5
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 64 C10 headers They worked on mine. Some minor frame trimming on the pass side and remove a grease zert on drivers side control arm. My motor is set between the two mounting points these trucks have. Mine were summit brand ceramic... I'll try and get some pics... Thanks Jaz __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-16-2015, 12:31 AM	#6
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 64 C10 headers Here's a pic with the first set of summit small tube headers for a 74 camaro.. You can see where I had to do some minor trimming second tube back Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-16-2015, 12:34 AM	#7
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 64 C10 headers Here's the new motor and bigger tube ceramic headers. These were off eBay for $215 so don't know brand just know they were for the same car... Notice in the first pic where the motor mounts are also! If I would've went to the furthest forward they wouldn't work. At the back mounts the hei cap hits the firewall. So I split the difference Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-16-2015, 12:59 AM	#8
Jazbojinx Registered User Join Date: Feb 2013 Location: Denair, CA Posts: 36	Re: 64 C10 headers Thanks Troy. I moved my engine 2" forward when I installed the 81 crossmember. Wanted the distributor away from the firewall. I'm going to order the 88-95 and if I have to I will cut them apart and tig them back up. Did you fill the bed side seams also? I'm going to fill all the body seams also. Thanks for all the feed back.

01-16-2015, 11:00 PM	#9
Bare64 Registered User Join Date: Aug 2014 Location: Ringgold, GA Posts: 53	Re: 64 C10 headers Does any manufacturer make a header for a 350 that is bolt in? Shorty type? __________________ 1964 Bare to the Bones

01-16-2015, 11:35 PM	#10
Jazbojinx Registered User Join Date: Feb 2013 Location: Denair, CA Posts: 36	Re: 64 C10 headers Sanderson makes a shorty. http://m.summitracing.com/parts/snh-cc3-p

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.