OR Parting 1965 Chevy C20 Flatbed

[67chevy4x4c]

Originally Posted by DLTruck1973

I have to pull it and test it. I should have some others here also. If I have a working one it would be $25.00 plus the shipping. Get me a zip code if interested and I will quote it with shipping.

Thank you,
Thomas

Zip is 24813 I need a 2 speed motor for a 1962 chevy truck

[DLTruck1973]

Originally Posted by 63burban

I will take the heater control. 53035

You are up for the heater control if still interested. $35.00 plus $11.30 for shipping will be $46.30 total.

This heater control does have aftermarket levers in it but they look fairly new.

Let me know and I will get you payment information,

Thank you,
Thomas

[77lesabre]

Do you have a 2 piece driveshaft available?

[DLTruck1973]

Originally Posted by 77lesabre

Do you have a 2 piece driveshaft available?

I will need to know what wheel base, what engine/trans and what rear differential you are using to give you a yes or no. The truck here does not have a driveshaft but I have some others that may work.

Let me know and I will see what I can do to help you.

Thank you,
Thomas

[77lesabre]

Originally Posted by DLTruck1973

I will need to know what wheel base, what engine/trans and what rear differential you are using to give you a yes or no. The truck here does not have a driveshaft but I have some others that may work.

Let me know and I will see what I can do to help you.

Thank you,
Thomas

I have a 61 long bed with a Chevy 350 and 700r4 tranny. I'm installin the porterbuilt dropmember and need to switch over to a 2 piece drive shaft. If there is one that will work without modifying then that would be awesome, but I figure I'll have to shorten/modify one with all of my mods so far.

[DLTruck1973]

Originally Posted by 77lesabre

I have a 61 long bed with a Chevy 350 and 700r4 tranny. I'm installin the porterbuilt dropmember and need to switch over to a 2 piece drive shaft. If there is one that will work without modifying then that would be awesome, but I figure I'll have to shorten/modify one with all of my mods so far.

I am not going to have anything that will work for you. You may want to get with a drive line shop and see if they can make up something for you.

Thank you for the interest,
Thomas

[smackhead61]

Originally Posted by smackhead61

How much would shipping be for the passenger door to 66216? I'd be interested in the bare door at 75.00 depending on shipping, Thanks.

We're you able to price the cost of shipping for the passenger door to 66216? Thanks

[DLTruck1973]

Originally Posted by smackhead61

We're you able to price the cost of shipping for the passenger door to 66216? Thanks

I started working on it then got distracted. Hold tight and I will get back with you. Sorry for the delay,

Thank you,
Thomas

[67chevy4x4c]

Did you have the two speed wiper motor for the 62 truck?

[DLTruck1973]

Originally Posted by 67chevy4x4c

Did you have the two speed wiper motor for the 62 truck?

Sorry, no I do not have one at this time. The one I do have does not work.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by smackhead61

We're you able to price the cost of shipping for the passenger door to 66216? Thanks

Ok, I got the quote and you are looking at $165.55 for shipping plus $75.00 for the door for a total of $240.55.

Let me know and thank you for the interest,
Thomas

[duallyjams]

Originally Posted by DLTruck1973

Price for the door panels shipped is $83.43. The box has to be rather big to ship these without damage.

Let me know and I will get them ready.

Thank you for the interest,
Thomas

pm me payment info

[DPowers]

Originally Posted by DLTruck1973

Cig Lighter...$12.50 do not know if it works.
Switch Knobs... Wiper $7.50 / Head light...$7.50
Fender and door trim pieces... What is left of the trim is rough(dents and deep gouging in areas) but I can sell the left front fender piece for $10.00 and the small short piece on the pass door for $10.00.

I will need to pull everything and package it all up for a accurate shipping quote. With out the trim pieces, I could get the other parts in a small flat rate box for $5.25.

Let me know and thank you for the interest,
Thomas

I can't tell if they are custom knobs or not?

[iceman777]

do you have the pump for the washer bottle and windshield squirters

[smackhead61]

Originally Posted by DLTruck1973

Ok, I got the quote and you are looking at $165.55 for shipping plus $75.00 for the door for a total of $240.55.

Let me know and thank you for the interest,
Thomas

Thanks for the quote. As much as I would like to have an original paint door I'm going to pass. Price for the door is outstanding, shipping price would kill me. Thanks for your assistance and good luck.

Steve

[DLTruck1973]

Originally Posted by DPowers

I can't tell if they are custom knobs or not?

Are the custom knobs the ones with the chrome/stainless trim in them? If so, I think the only one like that is the cig lighter. I may have some others to look at.

I will let you know. If you are looking for custom specific knobs.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by iceman777

do you have the pump for the washer bottle and windshield squirters

Welcome from England The washer pump on this truck (lorrie) is built into the actual wiper motor much like the later 1967-1972 Chevy trucks.

Do you need the windshield squirters that mount under the cowl screen? I will check on them and let you know on Monday.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by smackhead61

Thanks for the quote. As much as I would like to have an original paint door I'm going to pass. Price for the door is outstanding, shipping price would kill me. Thanks for your assistance and good luck.

Steve

I understand Steve and it is a lot for shipping. Thank you for the interest,
Thomas

[63burban]

Heater control arrived in great condition, thanks much

[DLTruck1973]

Originally Posted by 63burban

Heater control arrived in great condition, thanks much

Glad you are happy.

Thank you again,
Thomas

[bhc41051]

Looking for 3 of these these little clips for the washer hose.

[DLTruck1973]

Originally Posted by bhc41051

Looking for 3 of these these little clips for the washer hose.

These are the ones I have. Just removed them from the truck to show you.

How does $10.00 shipped sound?

Let me know,

Thank you,
Thomas

[cmseaver]

Looking for any windshield washer parts. From bracket and bottle to hoses and nozzles. I've got a 63 c10 if the parts are the same. Thank you for your time.

[bhc41051]

I'll take them, PM sent

[focusedontheprize]

Do you still have the gauge cluster?