TX 1971 Cheyenne parts for sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HSRACER · 02-10-2015, 01:59 AM

Emblems are shown in my,old thread labeled last of the 71 big block part out truck. Check that out.

**BIG ORANGE** · 02-10-2015, 09:32 AM

Quote:

Originally Posted by HSRACER

I will look closer tomorrow. They seem to be a slight tint already but there is no stick on anywhere. were they possibly tinted lightly from the factory?

I would much prefer local pick up on these. If you are willing to pay the shipping and packing supply cost I will consider doing it.

Yes that is a factory tint, the key here is NO scratches that you can catch with the tip of yr fingernail. I'm tinting them 5% so scratches will show through the tint, keep that in mind.
thanks Donnie

**57taskforce** · 02-10-2015, 10:15 AM

Are the emblems pitted at all?

Krex · 02-10-2015, 11:12 AM

Steering wheel?

**cericd** · 02-10-2015, 12:57 PM

You mentioned other truck bumpers. Would you happen to have a nice rear one with a dealership name stamped into it?

HSRACER · 02-10-2015, 01:08 PM

Quote:

Originally Posted by cericd

You mentioned other truck bumpers. Would you happen to have a nice rear one with a dealership name stamped into it?

Yes I do but that is a 225 dollar bumper and would need to be picked up locally. It is currently on a fleet side and has a Sealy TX dealership stamped on it

HSRACER · 02-10-2015, 01:11 PM

I also have the idler arm and power steering pitman arm you are looking for in your build post.

**cericd** · 02-10-2015, 01:42 PM

Quote:

Originally Posted by HSRACER

Yes I do but that is a 225 dollar bumper and would need to be picked up locally. It is currently on a fleet side and has a Sealy TX dealership stamped on it

I'm local. Do you have any pictures of the bumper? Any damage or pitting?

**57taskforce** · 02-10-2015, 04:41 PM

Quote:

Originally Posted by HSRACER

Emblems are shown in my,old thread labeled last of the 71 big block part out truck. Check that out.

I looked at the thread so is it just the emblems for one fender?

HSRACER · 02-10-2015, 10:19 PM

Quote:

Originally Posted by 57taskforce

I looked at the thread so is it just the emblems for one fender?

Yes, that is correct.

HSRACER · 02-10-2015, 10:20 PM

Quote:

Originally Posted by cericd

I'm local. Do you have any pictures of the bumper? Any damage or pitting?

Please call me to discuss. 713 410 6715. Thanks

HSRACER · 02-12-2015, 09:49 PM

Quote:

Originally Posted by HSRACER

Please call me to discuss. 713 410 6715. Thanks

I guess you weren't interested.

**zicc1835** · 02-12-2015, 10:35 PM

Quote:

Originally Posted by zicc1835

second on the side glass if Orange doesn't take it ill be in Houston week of 23rd of feb i have friends in Katy

Has orange passed i see he has a wtb thread for side glass yesterday ....if so I'll take them have someone in Katy can pick up thanks lmk

HSRACER · 02-12-2015, 11:02 PM

Quote:

Originally Posted by zicc1835

Has orange passed i see he has a wtb thread for side glass yesterday ....if so I'll take them have someone in Katy can pick up thanks lmk

Orange did not pass, I have decided not to ship these. I just don't want the hassle of boxing and packing them hoping ups doesn't drop them. Orange was also very particular on what he was looking for and I don't blame him for wanting perfect glass. These may have met his expectations but then again they may not have. I have refunded people a couple of times after they got the part and don't want there to be any misunderstanding regarding quality in the future. That is the reason for local pickup.

Let me know if you want them.

HSRACER · 02-12-2015, 11:04 PM

Quote:

Originally Posted by Crushkrew

PM'd about control arms....

I returned your pm with shipping price. LMK

HSRACER · 02-12-2015, 11:06 PM

Quote:

Originally Posted by 29od1

I'll take the Ac/ heat control panel for $7.
Can you post some pics and give me a quote for shipping to 67210?
Thanks,
David

I do have a working unbroken one from another truck now. 35 plus shipping. l
LMK

HSRACER · 02-12-2015, 11:09 PM

Quote:

Originally Posted by Krex

Bumper?

Which one? Front or rear?

HSRACER · 02-12-2015, 11:11 PM

Quote:

Originally Posted by 57taskforce

Pictures and condition of fender emblems and e brake assembly please?

I have a better brake assembly. From another truck. Not as rusty

**zicc1835** · 02-12-2015, 11:12 PM

Quote:

Originally Posted by HSRACER

Orange did not pass, I have decided not to ship these. I just don't want the hassle of boxing and packing them hoping ups doesn't drop them. Orange was also very particular on what he was looking for and I don't blame him for wanting perfect glass. These may have met his expectations but then again they may not have. I have refunded people a couple of times after they got the part and don't want there to be any misunderstanding regarding quality in the future. That is the reason for local pickup.

Let me know if you want them.

I'm going to make sure a Freind will pick them up for me sending u a p m

**cericd** · 02-13-2015, 09:58 AM

Quote:

Originally Posted by HSRACER

Please call me to discuss. 713 410 6715. Thanks

PM sent.

**zicc1835** · 02-13-2015, 12:11 PM

Quote:

Originally Posted by zicc1835

I'm going to make sure a Freind will pick them up for me sending u a p m

Al
P P sent for glass my Freind will make arraignments with you to pic up thank you
Jess

HSRACER · 02-13-2015, 08:52 PM

Quote:

Originally Posted by zicc1835

Al
P P sent for glass my Freind will make arraignments with you to pic up thank you
Jess

Got the PayPal. Thanks. I hope we can meet up when you are in town.

**zicc1835** · 02-14-2015, 12:47 AM

Quote:

Originally Posted by HSRACER

Got the PayPal. Thanks. I hope we can meet up when you are in town.

i would like that i will P M you when i get in see if we can meet up thank you

HSRACER · 02-16-2015, 01:49 AM

I can't believe no one needs a very good set of trailing arms, a solid wiper cowl, stock springs at all?...

HSRACER · 02-16-2015, 01:50 AM

I also have some hood hinges and hood latches if anyone needs them.

02-10-2015, 01:59 AM	#26
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: 1971 Cheyenne parts for sale Emblems are shown in my,old thread labeled last of the 71 big block part out truck. Check that out. __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

02-10-2015, 10:15 AM	#28
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,589	Re: 1971 Cheyenne parts for sale Are the emblems pitted at all? __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

02-10-2015, 11:12 AM	#29
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: 1971 Cheyenne parts for sale Steering wheel?

02-10-2015, 12:57 PM	#30
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,169	Re: 1971 Cheyenne parts for sale You mentioned other truck bumpers. Would you happen to have a nice rear one with a dealership name stamped into it? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

02-10-2015, 01:11 PM	#32
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: 1971 Cheyenne parts for sale I also have the idler arm and power steering pitman arm you are looking for in your build post. __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

02-16-2015, 01:49 AM	#49
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: 1971 Cheyenne parts for sale I can't believe no one needs a very good set of trailing arms, a solid wiper cowl, stock springs at all?... __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

02-16-2015, 01:50 AM	#50
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: 1971 Cheyenne parts for sale I also have some hood hinges and hood latches if anyone needs them. __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.