|
02-05-2004, 09:41 PM
|
#1 |
|
Registered User
Join Date: Sep 2003
Location: Alaska
Posts: 35
|
oil pressure gauge
I just painted the instrument cluster for the "brighter dash lights" fix. Before assembling everything I thought I would test all the bulbs. The oil pressure gauge is pegging out with key on and when engine is running. I know before it sat to the far left with key on and the engine not running.
There are 3 connections on the back shaped like an upside down triangle. The top left has 12 volts and the bottom is ground. The top right has nothing unless you plug the gauge in and then it has about 8 or 9 volts that run through the switch. Any thoughts on what my problem is before I put everything back together? It's alot easier to get to now.
__________________
1984 Silverado C10 GM Goodwrench 350 Edelbrock Intake/Carb Hedman Hedders 700R4 Transmission 12 Bolt out of an 81 275/60/15 Centerlines |
|
|
|
02-06-2004, 12:37 AM
|
#2 |
|
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Sounds like the wire to the sending unit isnt plugged in.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
|
|
|
|
02-06-2004, 01:01 AM
|
#3 |
|
Registered User
Join Date: Sep 2003
Location: Alaska
Posts: 35
|
I disconnected that wire and the tab that it attaches to pulled out of the sending unit. Guess I'll go get a new one tomorrow.
Thanks
__________________
1984 Silverado C10 GM Goodwrench 350 Edelbrock Intake/Carb Hedman Hedders 700R4 Transmission 12 Bolt out of an 81 275/60/15 Centerlines |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
