CA 1972 Suburban Part out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Grandpa54 · 05-14-2015, 11:56 PM

Did you ever get to the fuel sender unit? Mark

engairuph · 05-15-2015, 06:41 PM

Still needing the rear barn door lock, rods and clip to hold lock in. Post#11

**Chevy Fan Always** · 05-16-2015, 02:00 PM

I would be interested in the cowl flapper door, the plastic piece and screws on the outside firewall that holds it and the little plastic nut and receiver the the door pivots on that is on the cab side of the firewall. Also the voltage regulator if you still have it? ships to 44805

Mike Wilson

budnikguy · 05-17-2015, 02:13 PM

Pulled the lock and locking assembly....so you need the lock, the clip to hold the lock in place, and both rods upper and lower?! Please confirm and we can get a price and figure shipping.. Thank you

Quote:

Originally Posted by engairuph

Still needing the rear barn door lock, rods and clip to hold lock in. Post#11

budnikguy · 05-17-2015, 02:15 PM

Fuel sending unit is removed..here are pics for you...lmk. Thank you

Quote:

Originally Posted by Grandpa54

Did you ever get to the fuel sender unit? Mark

engairuph · 05-17-2015, 04:27 PM

Quote:

Originally Posted by budnikguy

Pulled the lock and locking assembly....so you need the lock, the clip to hold the lock in place, and both rods upper and lower?! Please confirm and we can get a price and figure shipping.. Thank you

Yes that is it, shipped to 39503 business

Grandpa54 · 05-17-2015, 04:58 PM

Thanks for the picks of the fuel sender , i was hoping it it was the one with the vent, it will not work for me at this time, mark

budnikguy · 05-17-2015, 05:15 PM

The lock, clip, both rods, and you need the mechanism? LMK and I can figure cost and shipping.

Quote:

Originally Posted by engairuph

Yes that is it, shipped to 39503 business

**Chevy Fan Always** · 05-17-2015, 06:20 PM

I wasnt sure if you saw this post:I would be interested in the cowl air flapper door, the plastic piece and screws on the outside firewall that holds it and the little plastic nut and receiver that the door pivots on, that is on the cab side of the firewall. Also the voltage regulator if you still have it? ships to 44805

Thanks Mike Wilson

engairuph · 05-17-2015, 08:33 PM

Quote:

Originally Posted by budnikguy

The lock, clip, both rods, and you need the mechanism? LMK and I can figure cost and shipping.

I need what you have on the hood showing

twistedchevy · 05-21-2015, 01:15 AM

Do you have the rear ac fan speed switch that goes in the gauge cluster?

**Chevy Fan Always** · 05-21-2015, 07:03 AM

Is the voltage regulator and condenser still available?
Mike

Mr. D · 05-22-2015, 03:54 AM

Hi twisted, I've got a deal working for the complete front and rear ac components off this vehicle and so would expect that the rear fan switch would be part of the complete Assy.
Posted via Mobile Device

twistedchevy · 05-22-2015, 05:32 PM

OK just hoping he has an extra

Mr. D · 05-22-2015, 05:40 PM

NP Twisted!

BTW do you have a build thread going for any of your projects?
Any pics?

Cheers!

twistedchevy · 05-23-2015, 12:44 AM

Quote:

Originally Posted by Mr. D

NP Twisted!

BTW do you have a build thread going for any of your projects?
Any pics?

Cheers!

Yea I have one for my 72suburban

engairuph · 05-24-2015, 07:37 AM

Any luck with a total yet on the rear lock, mechanism and rods?

sasquatch58 · 05-30-2015, 12:30 AM

is the brake pedal assy still available and do you know if this one also fits a c-10 pickup .thanks

uaengineer · 06-03-2015, 06:25 PM

Quote:

Originally Posted by budnikguy

I will get them out and take some pics for you.....

Have you been able to get the other set of parchment door panels out yet?

Mr. D · 06-05-2015, 04:56 PM

Ok, So I've decided (sort-of) to go a different direction with my door hardware and eventually door panels.
Since my 68 is missing so many pieces of door hardware already, I'm now considering going with all new (replacement) window and door cranks out of a 72. This way I can use the molded door panels.
Do you still have any of the following out of the 72?:
- All 4 window cranks
- All 3 door cranks
Thanks!

RedRoad · 06-08-2015, 01:13 AM

Did the front bumper ever get sold? Still interested

Thanks

budnikguy · 06-09-2015, 11:48 AM

Here are pics of inner fender wells I pulled from a different suburban...I will be removing them from this 72 custom deluxe also, but I do not have a time frame for that..I am posting the spare tire hump for you also...LMK

Adam

Quote:

Originally Posted by Chief Z

Looking for a spair tire tub and rear fender wells if in decent condition. Please provide pics of the bolt areas?

budnikguy · 06-09-2015, 11:49 AM

Struggling with removing the wiring that runs through the top of the suburban body...please hang in there...

Quote:

Originally Posted by Mr. D

Hi twisted, I've got a deal working for the complete front and rear ac components off this vehicle and so would expect that the rear fan switch would be part of the complete Assy.
Posted via Mobile Device

budnikguy · 06-09-2015, 11:50 AM

Missed this post...I will get shipping quot asap.

Quote:

Originally Posted by engairuph

Any luck with a total yet on the rear lock, mechanism and rods?

budnikguy · 06-09-2015, 11:52 AM

Yes i do, and yes it does ft a truck as they are the same...

Quote:

Originally Posted by sasquatch58

is the brake pedal assy still available and do you know if this one also fits a c-10 pickup .thanks

05-14-2015, 11:56 PM	#76
Grandpa54 Registered User Join Date: Mar 2011 Location: Bakersfield Ca. Posts: 417	Re: 1972 Suburban Part out Did you ever get to the fuel sender unit? Mark

05-15-2015, 06:41 PM	#77
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 447	Re: 1972 Suburban Part out Still needing the rear barn door lock, rods and clip to hold lock in. Post#11 __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

05-16-2015, 02:00 PM	#78
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 1972 Suburban Part out I would be interested in the cowl flapper door, the plastic piece and screws on the outside firewall that holds it and the little plastic nut and receiver the the door pivots on that is on the cab side of the firewall. Also the voltage regulator if you still have it? ships to 44805 Mike Wilson

05-17-2015, 04:58 PM	#82
Grandpa54 Registered User Join Date: Mar 2011 Location: Bakersfield Ca. Posts: 417	Re: 1972 Suburban Part out Thanks for the picks of the fuel sender , i was hoping it it was the one with the vent, it will not work for me at this time, mark

05-17-2015, 06:20 PM	#84
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 1972 Suburban Part out I wasnt sure if you saw this post:I would be interested in the cowl air flapper door, the plastic piece and screws on the outside firewall that holds it and the little plastic nut and receiver that the door pivots on, that is on the cab side of the firewall. Also the voltage regulator if you still have it? ships to 44805 Thanks Mike Wilson

05-21-2015, 01:15 AM	#86
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: 1972 Suburban Part out Do you have the rear ac fan speed switch that goes in the gauge cluster? __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

05-21-2015, 07:03 AM	#87
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 1972 Suburban Part out Is the voltage regulator and condenser still available? Mike

05-22-2015, 03:54 AM	#88
Mr. D Registered User Join Date: Mar 2015 Location: San Jose, CA Posts: 130	Hi twisted, I've got a deal working for the complete front and rear ac components off this vehicle and so would expect that the rear fan switch would be part of the complete Assy. Posted via Mobile Device

05-22-2015, 05:32 PM	#89
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: 1972 Suburban Part out OK just hoping he has an extra __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

05-22-2015, 05:40 PM	#90
Mr. D Registered User Join Date: Mar 2015 Location: San Jose, CA Posts: 130	Re: 1972 Suburban Part out NP Twisted! BTW do you have a build thread going for any of your projects? Any pics? Cheers! __________________ 56 Chevy step-side 68 Chevy Suburban 69 Corvette Stingray 00 BMW 325 (Daily driver) 09 BMW M3 18 GMC Acadia (Wife's daily driver)

05-24-2015, 07:37 AM	#92
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 447	Re: 1972 Suburban Part out Any luck with a total yet on the rear lock, mechanism and rods? __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

05-30-2015, 12:30 AM	#93
sasquatch58 Registered User Join Date: Aug 2012 Location: bowie maryland Posts: 165	Re: 1972 Suburban Part out is the brake pedal assy still available and do you know if this one also fits a c-10 pickup .thanks

06-05-2015, 04:56 PM	#95
Mr. D Registered User Join Date: Mar 2015 Location: San Jose, CA Posts: 130	Re: 1972 Suburban Part out Ok, So I've decided (sort-of) to go a different direction with my door hardware and eventually door panels. Since my 68 is missing so many pieces of door hardware already, I'm now considering going with all new (replacement) window and door cranks out of a 72. This way I can use the molded door panels. Do you still have any of the following out of the 72?: - All 4 window cranks - All 3 door cranks Thanks! __________________ 56 Chevy step-side 68 Chevy Suburban 69 Corvette Stingray 00 BMW 325 (Daily driver) 09 BMW M3 18 GMC Acadia (Wife's daily driver)

06-08-2015, 01:13 AM	#96
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: 1972 Suburban Part out Did the front bumper ever get sold? Still interested Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.