post latest 1/4 and 1/8 mile times and 60ft.

[70gmc longbed]

70 gmc longbed weighs 4300 with me in it
357 aluminum heads
1.9 60ft
8.7 1/8th
80mph
Posted via Mobile Device

[turbotruck]

1968 c10
turbo 355 sbc
borg warner s475 turbo
th350 trans
4130 lbs 3.73 rear gears
ptc 3500 stall


1.5 60 foot
6.46 @110 in the 1/8th
10.09 @131 mph in the 1/4

stock trailing arm suspension, with drop coils, front and rear sway bars added
15 year old napa shocks.

[Heavymetl]

5.3
10psi
4L80E
02-04 LS6 cam
3.25 gears Moser 9"
4100lbs

Now that Drag Week is over, time to turn up the boost and improve those times a little. Hoping for 10's at some point soon. I love this turbo stuff, drive like stock and scream on the skinny pedal.

[69GMC910]

Had my 82 out at the track on opening night at Castrol Raceway in Edmonton, Alberta on April 29th. Ran a new best! The DA was 2780' and I ran a 11.61 @ 116.10.

Heading back on May 20th to try to better my time.

[69GMC910]

This one was an 11.62 run.

https://youtu.be/EFr-XXjOWMU

[turbotruck]

Originally Posted by turbotruck

1968 c10
turbo 355 sbc
borg warner s475 turbo
th350 trans
4130 lbs 3.73 rear gears
ptc 3500 stall


1.5 60 foot
6.46 @110 in the 1/8th
10.09 @131 mph in the 1/4

stock trailing arm suspension, with drop coils, front and rear sway bars added
15 year old napa shocks.

not my best pass, but slowly getting there.
new shocks helped with launches. need to turn up the boost at launch to get the 60' back to what it used to be

[lower50's]

'52 GMC P/u
7.3L idi n/a diesel
custom intercooled turbo
4 sp auto
dually dana 70
locker
3:54 gears

First time drag racing for me and the truck
low boost 8psi
slipping trans
60ft 2.33
1/8 11.12 @ 60.23
1/4 17.64 @ 75
Slow but lots of room for improvement
A ton of fun

[Da_pLaNt]

78 SWB fleetside, Eagle 383, RHS Proaction 200 heads, th350, 9" w spool and 4.88 gears, caltracs CE 3 ways in front.

Best time to date:

1.628 60'
7.478@90.57
11.885@109.53

[19671972C10]

15.32@86 with 2.4 60'

[edhtrd71]

Finally took my 71 swb. My first time going down the drag strip was lots of fun but the reaction time and 60 ft times show I'm a rookie. Truck has a stock ls1/4l60e with stock converter and 3.73s.

60' 2.104
1/8 8.68
1/4 13.57
Mph 99.37

[RatPwrd72]

I took the '72 out for it's first passes with the 496 I built 2 years ago. Truck pulls great but needs a converter swap, it's way too tight. I also took it across the scales and it weighed 4480 lbs with me in it.

1.78 60'
7.80 1/8th
12.15 1/4 @ 109 mph.

[djracer]

Originally Posted by RatPwrd72

I took the '72 out for it's first passes with the 496 I built 2 years ago. Truck pulls great but needs a converter swap, it's way too tight. I also took it across the scales and it weighed 4480 lbs with me in it.

1.78 60'
7.80 1/8th
12.15 1/4 @ 109 mph.

ADD SOME NITROUS IT WILL Loosen that Ole converter up!

[pacman1967]

1st time having the truck at the track, it weights 4000lbs with me it it. A little 357sbc with a 142 supercharger.


Best 60ft 1.923
Best 1/8 8.176 @ 86.06
Best 1/4 12.789 @ 105.61

[lower50's]

60' 2.168
1/8 et 10.601
1/8 mph 63.17
1/4 et 16.801
1/4 mph 78.01
Dropped .7 et and gained 3 mph from last year

[409malibu]

just started building my 86 chevy sb. have been racing a 65 elcamino for a couple years now.
.040 sb 400
comp 660 solid roller
callies crank
6 in rods
mahle forged flat tops
brodix cnc track1 heads
brodix hv1000 intake
1050 dominator on 110
9 inch spool with 488's
29.5 9 inch mickey slick
built 350 turbo manual valve body 5500 convertor
car was going 10.20 but didn't handle very good

gonna transfer this set up into my truck over this winter on caltracs

[lower50's]

Originally Posted by 409malibu

just started building my 86 chevy sb. have been racing a 65 elcamino for a couple years now.
.040 sb 400
comp 660 solid roller
callies crank
6 in rods
mahle forged flat tops
brodix cnc track1 heads
brodix hv1000 intake
1050 dominator on 110
9 inch spool with 488's
29.5 9 inch mickey slick
built 350 turbo manual valve body 5500 convertor
car was going 10.20 but didn't handle very good

gonna transfer this set up into my truck over this winter on caltracs

That should be fun.

[turbotruck]

Originally Posted by turbotruck

not my best pass, but slowly getting there.
new shocks helped with launches. need to turn up the boost at launch to get the 60' back to what it used to be

went efi last winter. 2nd pass on efi, 15lbs of boost. did a little wheelie and ran a 6.43 @109 in the 1/8th. 1.4 60'

[hkrob]

1974 C-10 Long Bed , Dual Tanks , Trailer Hitch ect.
350ci Edelbrock RPM Heads, Comp XR270, Edelbrock Air Gap, Edelbrock 600cfm.
Th350 2400 Stall
4.10 posi
MT ET Street SS 275/60/15

1/8 mi
ET 9.06
78 Mph
60’ 2.13

Was having carb issues had to baby it off the line. Should be in the high 8’s once i get my carb working right.

[nebdrummer]

1.41 60ft
6.19@110 1/8th
9.87@140 1/4

760whp, 315 drag radial, 16lbs of boost. shooting for an 8 second this year!

[lower50's]

MMM boost

[68 C-10 KID]

60'...1.382
1/8...6.526
MPH..102.52
1/4...10.44
MPH...122.8

only 3rd time out with new engine. Truck needs some more suspension work.
launching on T-brake @ 3500 rpm tires @ 12psi

[Super73]

Originally Posted by 68 C-10 KID

60'...1.382
1/8...6.526
MPH..102.52
1/4...10.44
MPH...122.8

only 3rd time out with new engine. Truck needs some more suspension work.
launching on T-brake @ 3500 rpm tires @ 12psi

Looking good!!

Remind me, you have a TH400?
What tire gear?
Whats the verter flash too?

[68 C-10 KID]

TH400
5500 flash on the verter
tire 29.5 11.5w
4:56
I still have the 1'' drop springs in the front from many years back.
I'm going to install Santhuff front springs before I go out again.
I still have the Moroso front springs I got from you many years ago on the shelf

[Thamilktruck]

Dan Madewell
12/4/18
60' 1.56
1/8 ET 7.56
1/8 MPH 90
Year 1986
3860lbs
327 cubes
th350
coan 4500
150 shot
4:11
28x10.5
I drive it to highschool!

[BadX]

1.31 60
119.8
1/8 mile
3826 with driver

https://www.facebook.com/meancitycyc...267440/?type=3