|
08-12-2015, 08:52 AM
|
#1 |
|
Registered User
Join Date: Apr 2012
Location: PERU,il
Posts: 7
|
rear end width ?
What is the width of a rear end in a early 80's c20 2wd?
|
|
|
|
08-17-2015, 09:56 PM
|
#2 |
|
Registered User
Join Date: Apr 2012
Location: PERU,il
Posts: 7
|
Re: rear end width ?
Any ideas where to look?
|
|
|
|
|
08-17-2015, 11:37 PM
|
#3 |
|
Registered User
Join Date: Jul 2014
Location: Lincoln, CA
Posts: 208
|
Re: rear end width ?
67" assuming you have the full floating 14 bolt in the rear.
http://www.pirate4x4.com/tech/billavista/14b_bible/ |
|
|
|
|
08-24-2015, 02:27 PM
|
#4 |
|
Registered User
Join Date: May 2012
Location: Colo Springs, CO
Posts: 870
|
Re: rear end width ?
For my 89' V10 blazer (4x4), my front WMS to WMS (wheel mounting surface) is 67-1/4"
My rear is 63-1/2" WMS to WMS plus drum thickness. So approx. 64" These are 1/2 ton axles. A 1990 2wd 2500 truck with 14SF axle is 64-7/8". However the spring perches/shock mounts are different. Trucks changed body to IFS in 1988. There is also a wider one that's around 67 or 68" (two of the 14SF out there).
__________________
- Jeff 89' K5 Blazer, 2.5" lift, 35" tires  04' GMC Yukon XL, 3/4 ton, 8.1L |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
