1964-1966 center a/c vent - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged65c10 · 10-12-2015, 11:41 PM

Quote:

Originally Posted by corvettejim1968

if anybody wants the set in raw let me know because I can have a set ready in a couple of days. plus its cheaper. $225 for the center assembly and $300 for the package deal.

the chrome process is whats killing me on time. you can get it done or just paint them and save time and money.

Do you have a complete set in chrome? Available? Thanks Jim!
Posted via Mobile Device

corvettejim1968 · 10-14-2015, 08:31 AM

it takes about $800 plus to get a shipment of parts chromed. I have about $500 saved so far. plus I need to make another new mold for the small side vent balls. I have some vacation time coming up in Nov (1 week) and Dec (3 weeks) so I will have lots of time to dedicate to this project. thank you all

Adam1966C10 · 12-11-2015, 08:30 PM

Just received my full set and they look great. He even included a template for the center vent cut out. Quality looks good. This will be a great edition to my truck. Still have a long way to go be for it goes in though. I would encourage anyone thinking about these to pull the trigger, you will not be disappointed.

Slambone · 12-21-2015, 06:53 PM

I got mine too and the quality is freakin' awesome!! I highly recommend getting one. Question, where have you guys found a place that does plastic chrome?

Grandpa54 · 12-21-2015, 08:49 PM

Quote:

Originally Posted by grandpa54

ill take them. Put me on the list

jim, did you get any side vents made yet?

Adam1966C10 · 12-21-2015, 10:56 PM

www.chrometechusa.com is the place Jim recommended to me.

corvettejim1968 · 01-04-2016, 08:10 AM

just an update. im working on making some new molds. and again if anybody does not mind getting your parts in raw you can send them out yourself to have them chromed. this way you dont need to wait so long.

corvettejim1968 · 01-20-2016, 08:13 AM

still working on the smaller side vents mold. im building up the material to oversize the part because of the shrinkage issue im having. layer after layer this is a long process but in the end it will make a nicer part. Im a perfectionist i just cant help it.

earl84 · 01-21-2016, 10:30 AM

Can't wait until the side vent balls are in stock. The center vent is very nice, so I'm sure these will be quality as well. Plus, they look WAY cooler than the Vintage Air lower dash panel that is currently installed.

corvettejim1968 · 01-21-2016, 09:10 PM

Quote:

Originally Posted by earl84

Can't wait until the side vent balls are in stock. The center vent is very nice, so I'm sure these will be quality as well. Plus, they look WAY cooler than the Vintage Air lower dash panel that is currently installed.

thanks I like them much better as well.

sampsmit000 · 01-24-2016, 07:52 PM

Is the whole assembly available?

corvettejim1968 · 01-26-2016, 03:36 PM

Quote:

Originally Posted by sampsmit000

Is the whole assembly available?

Yes everything is available in its raw form

Eagletucky · 01-26-2016, 03:45 PM

including side vents?

corvettejim1968 · 02-04-2016, 08:20 AM

getting my tax return tomorrow this means i can send out some vents for chroming

sampsmit000 · 02-04-2016, 11:35 AM

How much is the complete assembly with chrome vents?

corvettejim1968 · 02-04-2016, 01:24 PM

Quote:

Originally Posted by sampsmit000

How much is the complete assembly with chrome vents?

if you want the center assembly its $300 and with the side vents its $400

corvettejim1968 · 02-04-2016, 02:02 PM

this is what your vents could look like if painted.

sampsmit000 · 02-04-2016, 04:38 PM

What paint did you use? How long until the chrome ones would be ready?

**nsb29** · 02-04-2016, 05:27 PM

jim put me down for a pair of side vents chrome PM sent

corvettejim1968 · 02-05-2016, 08:12 AM

Quote:

Originally Posted by sampsmit000

What paint did you use? How long until the chrome ones would be ready?

its about a 2 month turn around for chroming

DaddyOh · 02-08-2016, 11:50 PM

Anyone find a 'reasonable' place to get these vents chromed? Found a spot on the east coast but they want 70.00 per vent.... x the 5 vents.... adds up in a hurry plus shipping/waiting. Need to get this off the list, thanks

Slambone · 02-09-2016, 12:07 AM

Quote:

Originally Posted by DaddyOh

Anyone find a 'reasonable' place to get these vents chromed? Found a spot on the east coast but they want 70.00 per vent.... x the 5 vents.... adds up in a hurry plus shipping/waiting. Need to get this off the list, thanks

I know of a place in north hollywood. My mom worked there in the 80's. Trying to find out if they are still around. I had a chrome phone back then! I'll keep you posted.

corvettejim1968 · 02-16-2016, 08:32 AM

Dino is having a swap meet this Sat the 20th at his shop. i wanted to let you know I will be selling my 2nd`s for the A/C parts there. cheap

cru_zn_29 · 02-16-2016, 10:30 AM

Jim I need a set of side vents 2nd's will work. Thanks Kenny

corvettejim1968 · 02-16-2016, 02:22 PM

I'm not sure I have any but I will look

10-14-2015, 08:31 AM	#352
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: 1964-1966 center a/c vent it takes about $800 plus to get a shipment of parts chromed. I have about $500 saved so far. plus I need to make another new mold for the small side vent balls. I have some vacation time coming up in Nov (1 week) and Dec (3 weeks) so I will have lots of time to dedicate to this project. thank you all __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

12-11-2015, 08:30 PM	#353
Adam1966C10 Registered User Join Date: Nov 2015 Location: Cypress Posts: 39	Re: 1964-1966 center a/c vent Just received my full set and they look great. He even included a template for the center vent cut out. Quality looks good. This will be a great edition to my truck. Still have a long way to go be for it goes in though. I would encourage anyone thinking about these to pull the trigger, you will not be disappointed. Attached Images __________________ 1966 Chevy C10 short bed stepside

12-21-2015, 06:53 PM	#354
Slambone Registered User Join Date: Feb 2015 Location: Glendale, CA Posts: 45	Re: 1964-1966 center a/c vent I got mine too and the quality is freakin' awesome!! I highly recommend getting one. Question, where have you guys found a place that does plastic chrome?

12-21-2015, 10:56 PM	#356
Adam1966C10 Registered User Join Date: Nov 2015 Location: Cypress Posts: 39	Re: 1964-1966 center a/c vent www.chrometechusa.com is the place Jim recommended to me. __________________ 1966 Chevy C10 short bed stepside

01-04-2016, 08:10 AM	#357
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: 1964-1966 center a/c vent just an update. im working on making some new molds. and again if anybody does not mind getting your parts in raw you can send them out yourself to have them chromed. this way you dont need to wait so long. __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

01-20-2016, 08:13 AM	#358
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: 1964-1966 center a/c vent still working on the smaller side vents mold. im building up the material to oversize the part because of the shrinkage issue im having. layer after layer this is a long process but in the end it will make a nicer part. Im a perfectionist i just cant help it. __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

01-21-2016, 10:30 AM	#359
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: 1964-1966 center a/c vent Can't wait until the side vent balls are in stock. The center vent is very nice, so I'm sure these will be quality as well. Plus, they look WAY cooler than the Vintage Air lower dash panel that is currently installed.

01-24-2016, 07:52 PM	#361
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964-1966 center a/c vent Is the whole assembly available? __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

01-26-2016, 03:45 PM	#363
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: 1964-1966 center a/c vent including side vents? __________________ The Swiss Car Club......A drinking club with a car problem....

02-04-2016, 08:20 AM	#364
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: 1964-1966 center a/c vent getting my tax return tomorrow this means i can send out some vents for chroming __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

02-04-2016, 11:35 AM	#365
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964-1966 center a/c vent How much is the complete assembly with chrome vents? __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

02-04-2016, 02:02 PM	#367
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: 1964-1966 center a/c vent this is what your vents could look like if painted. __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

02-04-2016, 04:38 PM	#368
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964-1966 center a/c vent What paint did you use? How long until the chrome ones would be ready? __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

02-04-2016, 05:27 PM	#369
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: 1964-1966 center a/c vent jim put me down for a pair of side vents chrome PM sent Last edited by nsb29; 02-06-2016 at 04:46 PM.

02-08-2016, 11:50 PM	#371
DaddyOh Registered User Join Date: Jul 2015 Location: Southern California Posts: 180	Re: 1964-1966 center a/c vent Anyone find a 'reasonable' place to get these vents chromed? Found a spot on the east coast but they want 70.00 per vent.... x the 5 vents.... adds up in a hurry plus shipping/waiting. Need to get this off the list, thanks __________________ '65 Tiki Sea 10: http://67-72chevytrucks.com/vboard/s...d.php?t=682356



Register or Log In To remove these advertisements.

02-16-2016, 08:32 AM	#373
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: 1964-1966 center a/c vent Dino is having a swap meet this Sat the 20th at his shop. i wanted to let you know I will be selling my 2nd`s for the A/C parts there. cheap __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

02-16-2016, 10:30 AM	#374
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: 1964-1966 center a/c vent Jim I need a set of side vents 2nd's will work. Thanks Kenny

02-16-2016, 02:22 PM	#375
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: 1964-1966 center a/c vent I'm not sure I have any but I will look __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.