|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-07-2015, 11:18 AM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: pacific north west
Posts: 230
|
energy suspention front spring grommets?
Bought a set of 3.2112g front spring replacement grommets. I'm having a problem with the placement of the rear front spring grommets in the kit. Four of them have a wider shoulder than the other four. How are they placed, seems like they should all be the same.
|
|
|
|
11-07-2015, 07:07 PM
|
#2 |
|
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: energy suspention front spring grommets?
No. They need to be different thicknesses because the width of the spring is narrower than the frame brkt for the shackle.
Narrow in the frame. Wider ones in the spring eye.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 11-08-2015 at 12:24 PM. |
|
|
|
|
05-10-2016, 10:49 AM
|
#3 |
|
Registered User
 Join Date: Dec 2015
Location: Edmond, OK
Posts: 54
|
Re: energy suspention front spring grommets?
Sorry to revive such an old thread, but I purchased the same kit and it appears the shoulder on the bushings tha go in the spring eye are far too large to fit in the frame shackle once assembled.
I was thinking about taking some thickness off of them, but wanted to see what others have done. Am I supposed to just press it into the frame? |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
